• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.4
• /
• pp.332-342
• /
• 1995

The important factors of reaction conditions in sol-gel transition of silicon alkoxide solution have been reviewed and discussed on the basis of Raman study. Various factors such as type of catalyst, alkoxide, solvent, drying control chemical additive and water content affect the conversion mechanism in sol-gel process.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.1
• /
• pp.33-41
• /
• 2015

The kinetic analysis of energetic materials using Differential Scanning Calorimetry (DSC) is proposed. Friedman Isoconversional method is applied to DSC experiment data and AKTS software is used for analysis. The proposed kinetic scheme has considerable advantage over the standard method based on One-Dimenaionl Time to Explosion (ODTX). Reaction rate and product mass fraction simulation are conducted to validate extracted kinetic scheme. Also a slow cook-off simulation is implemented on $B/KNO_3$ for validating the applicability of the extracted kinetics scheme to a practical thermal experiment.

• Resources Recycling
• /
• v.24 no.6
• /
• pp.3-8
• /
• 2015

Gasification characteristics and gas produced from a sewage sludge char were analyzed by using a thermobalance reactor, which is used for a reaction kinetic analysis by measuring weight change of materials at a desired temperature. Gasification reaction rate increased with increasing temperature and steam partial pressure due to the promotion of gasification reaction. Three models of gas-solid reaction were applied to the reaction kinetics analysis and modified volumetric reaction model was an appropriated model for the steam gasification of the sewage sludge char. Apparent activation energy and pre-exponential factors were evaluated as 155.5 kJ/mol and $14,087s^{-1}atm^{-1}$, respectively. The order of reaction on steam partial pressure was 0.68. Gas analysis was performed at $900^{\circ}C$ and hydrogen concentration was highest in the gas concentrations, which increased with increasing the steam partial pressure. Hydrogen concentration increased the most and hydrogen concentration in the produced gas was 2-4 times higher than that of carbon monoxide due to the gasification and water gas shift reaction.

• Radiation Oncology Journal
• /
• v.28 no.4
• /
• pp.205-210
• /
• 2010

Purpose: To evaluate the predictive factors for treatment response and prognostic factors affecting survival outcomes after concurrent chemoradiotherapy (CCRT) for patients with anal squamous cell carcinoma. Materials and Methods: Medical records of forty two patients with histologically confirmed analsquamous cell carcinoma, who had complete CCRT between 1993 and 2008, were reviewed retrospectively. Median age was 61.5 years (39~89 years), and median radiotherapy (RT) dose was 50.4 Gy (30.0~64.0 Gy). A total of 36 patients had equal to or less than T2 stage (85.7%). Fourteen patients (33.3%) showed regional nodal metastasis, 36 patients (85.7%) were treated with 5-fluorouracil (5-FU) plus mitomycin, and the remaining patients were treated by 5-FU plus cisplatinum. Results: The median follow-up time was 62 months (2~202 months). The 5-year overall survival, loco regional relapse-free survival, disease-free survival, and colostomy-free survival rates were 86.0%, 71.7%, 71.7%, 78.2%, respectively. Regarding overall survival, the Eastern Cooperative Oncology Group (ECOG) performance status and complete response were found to be significant prognostic factors on univariate analysis. For multivariate analysis, only the ECOG performance status was significant. No significant factor was found for locoregional relapse-free survival or disease-free survival and similarly for treatment response, no significant factor was determined on logistic regression analysis. There were 7 patients who had local or regional recurrences and one patient with distant metastasis. The only evaluable toxicity in all patients was radiation dermatitis of perianal skin (grade 3), which developed in 4 patients (9.5%) and grade 2 in 22 patients (52.4%). Conclusion: This study revealed that patients with a performance score of ECOG 0-1 survived significantly longer than those with a poorer score. Finally, there was no significant predicting factors tested for treatment response.

• Journal of the Korean Chemical Society
• /
• v.66 no.6
• /
• pp.436-441
• /
• 2022

Because the nanoporous electrodes has large electrochemical surface areas, extensive studies have been focused on their fabrication methods. In this paper, a method for introducing a nanoporous gold (NPG) structure on the surface of an ultramicroelectrode (UME) using potentiostatic anodization was investigated. A well-defined NPG structure was introduced on the surface of the UME when a potential of 1.3 V was applied in 0.1 M phosphate buffer solution (pH 8) containing 1 M KCl. The anodic oxidation efficiency was investigated by observing the effect of the applied potential, the reaction time, and the size of the electrode on the roughness factor (R_f) of the prepared NPG-UMEs. In a short time of about 10 minutes, NPG-UME with a large R_f value of about 2000 could be prepared, which could be effectively used for electrochemical glucose detection. The results shown in this work are expected to have great applicability when performing electrochemical analysis with a small sample volume.

• Polymer(Korea)
• /
• v.38 no.6
• /
• pp.774-781
• /
• 2014

Acetylenic or phenylethynyl end-capped polyisoimide oligomers ($M_w$ 2500 g/mol, 5000 g/mol) based upon 4,4'-diamino diphenyl ether (4,4'-ODA)/4,4'-oxydiphthalic anhydride (ODPA) and 4,4'-ODA/3,3',4,4'-benzophenone tetracarboxylic acid dianhydride (BTDA) were synthesized by using 4-ethynylaniline (4-EA) or 4-phenylethynyl phthalic anhydride (4-PEPA) as an end capper. The incorporation of ethynyl groups were confirmed by FTIR spectroscopy. The isomerization temperature was influenced by molecular weight as well as the backbone structure of polyisoimides oligomers. Thus, polyisoimide oligomers with molecular weight of 2500 g/mol was found to be imidized at temperature $10^{\circ}C$ lower than that for the oligomers with molecular weight of 5000 g/mol. The crosslinking reaction of ethynyl groups occurred at a higher temperature than that for the isoimide/imide isomerization reaction. These two reactions were totally or partially overlapped on the DSC thermograms for the polyisoimide oligomer end-capped with 4-EA. Kinetics of thermal imidization and crosslinking reactions for the 4,4'-ODA/ODPA polyisoimide oligomers end-capped with 4-PEPA were investigated by performing dynamic DSC experiments at heating rate of $10^{\circ}C/min$. The activation energy and pre-exponential factors were 141 kJ/mol and $1.45{\times}10^{13}min^{-1}$ for the imidization reaction and 177 kJ/mol and $2.90{\times}10^{13}min^{-1}$ for the crosslinking reaction, respectively.

• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.315-319
• /
• 2018

Fenton reaction is widely used as a out of cell method for evaluating the membrane electrochemical durability of Proton Exchange Fuel Cell (PEMFC). In this study, we investigated the factors affecting the Fenton reaction. In order to estimate the degree of the reaction, it is necessary to analyze the radicals as a product in the Fenton reaction. However, since the radicals are difficult to analyze, the degree of the reaction was measured by analyzing the concentration of hydrogen peroxide. The activation energy was calculated from the rate of hydrogen peroxide change with temperature. The activation energy was 24.9 kJ/mol at 180 min. The Fenton reaction rate was affected by the iron ion concentration. At $80^{\circ}C$, 200 rpm, and $Fe^{2+}$ 80 ppm, the concentration of hydrogen peroxide was decreased more than 20% even for 1 hour, which shows that frequent solution replacement increases the membrane degradation rate.

• Journal of the Korean Chemical Society
• /
• v.46 no.1
• /
• pp.14-18
• /
• 2002

It is shown that one-electron reduction of nitric oxide (NO) to nitroxyl anion $(NO^-)$ can be accelerated by vibrational energy. Potential energy surfaces of NO and $NO^-$ reveal that the vertical transition between them has favorable energetics for vibrationally excited molecule. Also, Franck-Condon factors between NO and $NO^-$ vibrational wave functions are calculated. It shows that the number of open channels increases with increased vibrational energy. These results mean that we can control the rate of reduction of NO to $NO^-$ by radiating an appropriate light.

• Journal of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.464-475
• /
• 1988

The complex formation of p-aminoazobenzene and its derivatives with Fe(III) and Mn(II) has been studied by UV and IR spectroscopy and conductometry. The effects of solvents, donor basicity, and other factors on the formation of these complexes have been examined. The vatio of metal to ligand for the complexes formed is 1 : 1, both in the solid state and in solution. The stability constants of Fe(III)-donor and Mn(II)-donor complexes are in the range of 10$^2$∼10$^4$ and 0.1∼1, respectively. The absorptivities are ~10$^4$ and ∼10$^3$ l/mol${\cdot}$cm respectively. Thermodynamic properties such as ${\Delta}H^{\circ}$, ${\Delta}G^{\circ}$ and ${\Delta}S^{\circ}$ are calculated from their stability constants utilizing Van't Hoff equation.

• Journal of the Korean Chemical Society
• /
• v.53 no.6
• /
• pp.635-639
• /
• 2009

Experimental work was carried out to study the combustion kinetics of the Indian coal-char in the varying mixture of carbon dioxide-oxygen ($CO_2-O_2$). The coal sample was pulverized and sieved to less than 58 microns and charred using volatile furnace by passing the nitrogen gas. The experiments were carried out using the Thermo Gravimetric Analyzer (TGA-50) at CPRI, Bangalore, different proportions of ($CO_2-O_2$) gas was allowed in to the TGA-50 (80-20, 60-40, 40-60, 20-80) mole basis were used to study the combustion kinetics of coal Isothermally, kinetic parameters like Activation energy (E) and the pre-exponential factors (A) are calculated using the unification approach and modified Arrhenius equation.