• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1817-1821
• /
• 2010

본 연구에서의 지리정보시스템(GIS)을 이용한 사방댐 입지선정모델 개발은 산사태 발생 예측을 위한 사면안정성 평가 기준을 개발하여 사방댐 지점을 선정하기 위하여 체계적으로 표준화된 시스템을 구축하는 것이 목표이며, 2002년 태풍 '루사'와 2003년 태풍 '매미'에 의하여 토석류와 산사태가 발생한 서부경남 지역의 38개 지점에 대하여 항공사진 수집 및 현장조사를 수행하고, 산사태 발생에 관계되는 강우, 지형, 지질 및 토양, 임상 등을 인자로서 규정하였다. 연구결과 서부경남지역에서 발생한 산사태는 지리산, 가야산, 좌굴산 등 EL. 500m 이상의 비교적 고도가 높은 산악지역에서 지형성 집중호우에 의하여 발생하는 것으로 분석되었으며, 강우량과 산사태의 상관분석결과 시강우량 70mm 이상 및 누가강우량 230mm 이상에서 산사태의 발생빈도가 높은 것으로 나타났다. 또한 산사태 발생지점에서의 고도(평균해수면 기준)와 능선의 고도와의 비를 백분율로 계산하여 빈도를 살펴보면 산사태 발생지점이 능선의 90% 이상의 고도에서 산사태의 발생빈도가 53%로 가장 높고, 80-90%는 21%, 70-80% 16%의 순으로 산사태 발생빈도가 감소하고 있으며, 고도가 더욱 낮아져 산사태 발생지점이 60% 이하로 내려가면 산사태 발생빈도는 급격히 감소한다. 예를 들어 능선의 고도가 1000m일 경우 900m 이상의 고도(90% 이상)에서 산사태 발생빈도가 가장 높고 600m 이하의 고도(70% 이하)에서는 발생빈도가 급격히 저하하는 것으로 나타났다. 산사태 발생지점의 표면 굴곡도에 따른 산사태의 발생빈도는 대부분의 평행사면에서 74%, 약간 오목사면에서 26%가 발생하는 것으로 나타났다. 각 지구의 지질 및 토양별 산사태 발생빈도는 화성암계열의 지질 및 자갈/암괴 섞인 토사의 토양에서 발생하는 것으로 분석되었고, $34-40^{\circ}$ 사면경사에서 40%, $26-34^{\circ}$ 사면경사에서 26%, $26^{\circ}$ 이하의 사면경사에서 22%가 주로 발생하였으며, $40^{\circ}$ 이상의 높은 사면경사에서는 극히 미미하였다. 또한 임상 기준으로는 침엽수림에서 주로 발생하는 것으로 나타났다. 본 연구에서는 이상의 결과를 기초로 매우 안정, 안정, 부분적 안정, 불안정, 매우 불안정, 위험 지역으로 구분하고, 평가한 결과는 불안정 33개소, 매우 불안정 5개소 등 38개소 지점 모두에 사방댐 설치가 필요한 것으로 분석되었다.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.8
• /
• pp.5-14
• /
• 2018

The grain size of clastic sedimentary rocks classifies the rock types and also causes of anisotropy of the rock. The anisotropy is one of the most important factors that dominates the strength and weathering behavior of rocks. The anisotropy of clastic sedimentary and igneous rocks in the Gyeongsang Basin including Yeongju, Daegu, and Busan were analyzed by magnetic susceptibility expressed by the degree of anisotropy and shape parameter. As the results of the study, the sandstone deposited under lacustrine environment unaffected by the external force shows 1.03 degree of anisotropy. The degrees of anisotropy of the rocks affected by faults and fault rocks show 1.06 and 1.14, respectively. The magnetic susceptibility of rocks is to decrease with the distance from the fault. A fresh mudstone and shale formed by fines show a similar magnitude of the degree of anisotropy to fault rock and correspond to oblate shape parameter due to their sedimentary structure. Due to these reasons, we need attention in design, construction, and maintenance of a structure constructed in mudstone and shale.

• Journal of the Korean earth science society
• /
• v.29 no.3
• /
• pp.221-245
• /
• 2008

The precambrian granitic gneiss and porphyroblastic gneiss are widely distributed in the Gwangyang-Hadong area of Korea. This study focuses on the geochemical properties and metamorphic P-T conditions of these gneisses. These gneisses are plotted according to granodiorite domain on an IUGS silica-alkali diagram. Geochemical properties of major elements suggest that these rocks are of the sub-alkalic rock series, and were farmed from S-type magmas which were generated in a syn-collision tectonic environment. The amounts of trace elements (Zn, Sc, Sr, V, etc.) decreased as $SiO_2$ concentrations increased. Almandine and spessartine mol%'s and XFe are higher in garnet rims, while pyrope mol%'s are higher in the garnet cores. This seems to be the result of garnet growth and retrogressive metamorphism. Metamorphic zones are divided into sillimanite-cordierite, sillimanite, garnet, and biotite zones. Metamorphic P-T conditions estimated from the gneisses indicate high temperature and low to medium pressure metamorphism (689-757$^{\circ}C$, 5.0-5.6 kbar), followed by medium temperature, low pressure retrorade metamorphism (579-628$^{\circ}C$, 3.1-4.5 kbar), and overprinted retrogade metamorphism (502-558$^{\circ}C$, 1.6-2.3 kbar).

• Journal of the Korean Society of Earth Science Education
• /
• v.9 no.2
• /
• pp.163-172
• /
• 2016

The aim of this study is to investigate the geological features distributed in the northwest coast, Goheung Gun as a geological field course of all levels. The study area is about 1.6km coast in direction of northwest from Sumundong ferry to Jangsun beach. The learning contents of the geology units in science textbooks from elementary school to high school was analyzed and, geomorphology and geology of study area was investigated for this study. In this study area, lots of geomorphology and geology elements related to the learning contents of the geology units in science textbooks were founded such as gravel beach, sea cliff, granite, rhyolite, andesite, gneiss, sedimentary rocks, fault, unconformity, stratification, cross bedding, graded bedding, intrusion structure, vein, dyke, plant fossil and spheroidal weathering. Characteristically, strata, stratification, granite, sedimentary rocks(conglomerate, sandstone, mudstone and shale), fault, plant fossil and weathering phenomenon were commonly involved with the learning contents of the geology units in elementary school science, middle school science and high school earth science I, II. This area is to be recommended as a site of geological field course for all students from elementary school to high school, as various field work materials for geological learning were distributed and, geological observation trail of about 400m in length for observation of strata and so on was installed along the coast in direction of the northwest from Sumundong ferry.

• Economic and Environmental Geology
• /
• v.31 no.2
• /
• pp.89-99
• /
• 1998

The gold-silver mineralizations in Korea are closely related to Jurassic Daebo igneous activity (121 and 183 Ma) and Cretaceous Bulgugsa igneous activity (60 and 110 Ma). A compilation and re-evaluation of chemical data in arsenopyrite suggest that the As contents vary, reflecting different genetic environments or mineral assemblages. The gold-silver vein deposits from various mineralized area were investigated using arsenopyrite geothermometer. Arsenopyrites from the Jurassic Au-dominant deposits are distinct by high As contents (29.68~33.46 atomic %) with narrow variations, equivalent to a temperature range of $370{\sim}450^{\circ}C$ and a sulfur fugacity of about $10^{18}-10^{-6}$ atm. On the contrary, arsenopyrites from the Cretaceous Au-Ag and Ag-dominant deposits show a wider range in atomic % As composition of 27.47-32.74. They may have formed at temperatures of $250{\sim}350^{\circ}C$ and about $f_{S_2}=10^{-12}-10^{-10}$ atm. The data of arsenopyrite geothermometer, electrum-sphalerite geothermometer, fluid inclusions, vein morphology and emplacement depth of igneous rocks indicate that the gold mineralizations of Group IIA occurred at temperatures between 300 and $500^{\circ}C$ at depth of several tens km or more (about 4-5 kbar), and the gold-silver deposits of Groups III, IV and V were formed at a temperature range of about $170{\sim}370^{\circ}C$ under the shallow environment (<1 kbar).

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.4
• /
• pp.367-376
• /
• 2007

Aenigmatite, $Na_4(Fe^{2+},Ti,Fe^{3+}){_{12}}(Fe^{3+},Si){_{12}}O_{40}$, is a common constituent of sodium-rich alkaline igneous rocks and is classified a an open-branched single-chain silicate. $M\ddot{o}ssbauer$ spectroscopy of three natural aenigmatite specimens were done and the detailed crystal chemistry was obtained. Fitting of $M\ddot{o}ssbauer$ spectra led to the resolution of nine peaks. They consist of three doublets of $Fe^{2+}/oct$ and one merged peak at low velocity matching to two small peaks at high velocity which were assigned to $Fe^{3+}/tet\;and\;Fe^{2+}/oct$, respectively. Using the peak area for $Fe^{2+}\;and\;Fe^{3+}$ peaks, analytical data were recalculated. Precise assignment of $Fe^{2+}\;and\;Fe^{3+}$ ions in tetrahderal and octahedral sites revealed detailed crystal chemistry of aenigmatite. The existence of significant amounts of $Fe^{3+}/tet$ indicates that $Fe^{3+}$ has preference over $Al^{3+}$ for the tetrahedral sites. Crystal chemistry of aenigmatite (AEN1) yields the formula of $(Na_{3.97}Ca_{0.03})(Ca_{0.11}Mn_{0.59}Fe^{2+}{_{8.07}}Ti_{2.07}Mg_{0.70}Fe^{3+}{_{0.43}}Al_{0.04})(Fe^{3+}{_{0.56}}Al_{0.18}Si_{11.26})O_{40}$.

• Economic and Environmental Geology
• /
• v.52 no.5
• /
• pp.323-336
• /
• 2019

The Mesozoic activity on the Korean Peninsula is mainly represented by the Triassic post-collisional, Jurassic orogenic, and Cretaceous post-orogenic igneous activities. The diversity of mineralization by each geological period came from various geothermal systems derived from the geochemical characteristics of magma with different emplacement depth. The Cretaceous metallic mineralization has been carried out over a wide range of time periods from ca. 115 to 45 Ma (main stage; ca. 100 to 60 Ma) related to post-orogenic igneous activity, and spatial distribution patterns of most metal deposits are concentrated along small granitic stocks. The late Cretaceous metal deposits in the Gyeonggi and Yeongnam massifs are generally distributed along the boundary among the Gongju-Eumseong fault system and the Yeongdong-Gwangju fault system and the Gyeongsang Basin, most of them are in the form of a distal epithermal~mesothermal Au-Ag vein or a transitional mesothermal Zn-Pb-Cu vein. On the other hand, diverse metal commodities in the Taebaeg Basin, the Okcheon metamorphic belt and the Gyeongsang Basin are produced from various deposit types such as skarn, carbonate-replacement, vein, porphyry, breccia pipe, and Carlin type. In the late Cretaceous metallic mineralization, various mineral deposits and commodities were induced not only by the pathway of the hydrothermal solution, but also by the diversity of precipitation environment in the proximity difference of the granitic rocks. The diversity of these types of Cretaceous deposits is fundamentally dependent on the geochemical characteristics such as degree of differentiation and oxidation state of related igneous rocks, and ore-forming fluids generally exhibit the evolutionary characteristics of intermediate- to low-sulfur hydrothermal fluids.

• The Journal of the Petrological Society of Korea
• /
• v.1 no.2
• /
• pp.104-123
• /
• 1992

We present petrography, mineral chemistry of amphibole and plagioclase, and major and trace element chemistry for the Ogcheon metabasites occurring in the Poun and Mungyong areas to understand metamorphism, and to define chemical characteristics of parental rocks and their implication for tectonic environment. The Ogcheon metabasites often preserve relict igneous textures, although no primary phases are observed. They are mainly composed of amphibole (actinolite+hornblende)+plagioclase+epidote+chlorite+sphene+opaque oxides, indicating epidote amphibolite facies metamorphism. Coarse-grained amphiboles frequently have actinolitic composition in the core, and hornblende along the margin and cleavage, which can be interpreted either as miscibility gap or as result of polymetamorphism. Although presumed polymetamorphic events in the Ogcheon supergroup favor the latter possibility, further metamorphic studies are necessary to solve the problem. Amphibole and plagioclase chemistries suggest greenschist (epidote-amphibolite, if miscibility gap is present) to amphibolite facies metamorphism of possibly medium pressure. The major and trace element data of whole rocks indicate that the Ogcheon metabasites are transitional to tholeiitic basalts belonging to within-plate environment. Absence of evidences indicating deep sea environment suggests that the Ogcheon metabasites emplaced in an intra-cratonic, possibly rift environment which failed to proceed to an oceanic rift. Chemical variation of the metabasites toward a granitic pluton indicates K loss closer to the pluton, suggesting that caution should be taken when K is involved in a discussion.

• The Journal of the Petrological Society of Korea
• /
• v.23 no.3
• /
• pp.279-292
• /
• 2014

Nd isotopic compositions analyzed from the Phanerozoic granitoids of Korea are integrated and discussed. Variations in Nd isotopic compositions can be explained either by temporal trend or by regional differences. Among the three active periods, first two periods during the Permian-Triassic and Jurassic seem to show variations from rather high ${\varepsilon}_{Nd}(t)$ values at the beginning to lower ${\varepsilon}_{Nd}(t)$ values during the later stages. Such trends probably reflect melting of the subducting oceanic crust and producing magma with higher proportion of depleted mantle derived materials during the early stage of subduction process, and subsequent magmas with greater proportion of old continental crust with progress of subduction. However, the Cretaceous-Paleogene period of active magmatism displays higher ${\varepsilon}_{Nd}(t)$ values during the advanced stage of the igneous activities, which is opposite to the previous active periods. The other explanation is that such differences in ${\varepsilon}_{Nd}(t)$ reflect regional differences, based on the observations that such high-${\varepsilon}_{Nd}(t)$ granitoids distribute in the northeastern Gyeongbuk Province and Gyeongsang Basin. If this is the case, the regions with highr ${\varepsilon}_{Nd}(t)$ values may have distinct crustal evolution histories, e.g. younger average age. The choice between the two hypothesis could be made through further studies.

• Journal of the Korean earth science society
• /
• v.40 no.2
• /
• pp.163-176
• /
• 2019

The Potosinian geological basement in central Mexico is comprised of the Upper Paleozoic metamorphic rocks, which crop out on the Sierra de Catorce nucleus located in the northeastern part of the state. The sedimentary sequence that covers unconformably the Paelozoic basement is represented by an Upper Triassic marine sedimentary sequence, correlating to the Zacatecas Formation and the Upper Triassic continental Huizachal Formation red beds, which in turn are covered either by La Joja Formation Jurassic red beds or by Upper Jurassic marine sediments. This sequence is overlain by the conformable Cretaceous calcareous marine sedimentary rocks in all the state of San Luis Potosi. The Cenozoic sequence unconformably covers some of the aforementioned rocks and is represented by undifferentiated volcanic rocks as well as by marine clastic rocks. The existing intrusive igneous rocks are felsic to intermediate composition, and they intrude the metamorphic basement and sedimentary rocks. Conglomerates with evaporitic sediments were deposited during the Pleistocene. The Quaternary sequence includes basalt flows, piedmont deposits, alluvium, and occasionally evaporites and caliche layers. In the state of San Luis Potosi, a great diversity of mineral deposit types is known as both metallic and nonmetallic. The host rocks of these deposits vary from one another including formations that represent from Paleozoic up to Tertiary. The mineralization age corresponds approximately to Tertiary (75%), and is mainly epigenetic. Conclusively, the data on geology and mineralization in San Luis Potosi, Mexico are helpful to predict a hidden ore body and select promising mineralized zone(s) when the domestic company makes inroads in the mining sector of Mexico.