• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.377-382
• /
• 1998

This study was carried out to investigate the relation between surface acidity and interfacial electrical characteristics of surface-treated ${\gamma}-alumina$ whose surface activity was increased. The points of zero charge (P. Z. C.) of ${\gamma}-alumina$ whose surface is treated with the sulfuric, nitric and hydro-chloric acid of various concentration were measured from the site-binding theory and mass transport method. The surface active sites were measured by amine titration method and Hammett indicator method. The interfacial properties at alumina/KCl(aq) interface were measured by potentiometric titration. From the experimental results, the following results were obtained. Pure ${\gamma}-alumina$ surface acidity decreases with the increase of calcination temperature at strength $H_o{\leq}+9.3$ Surface-treated alumina acidic properties increase with the anion loading on alumina surface. The surface ionization constants decrease with anion loading on alumina surface, then P. Z. C. decreases with acid amount on alumina surface. Acid amount of surface treated alumina can be correlated with surface charge density at strength $H_o{\leq}+4.8$ as follows. $SO_4^2-/Al_2O_3:Q_A=-0.172ln(0.0418{\sigma}+1.448)$ $NO_3^-/Al_2O_3:Q_A=-0.024{\sigma}-0.0189$ $Cl^-/Al_2O_3:Q_A=-0.01{\sigma}-0.2006$.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.11
• /
• pp.981-986
• /
• 2014

Printed electronics devices are made of several sets of printed patterns. The quality or printability of the printed patterns determines the electrical performance of such devices. Moreover, control of the printability determines the reliability of such devices. Despite its importance, few studies have been reported for the measurement of the printed patterns to evaluate their printability. In this study, a measurement method is proposed for printed patterns, including the definition of the properties to be measured, and the related software is described. The proposed method measures the width, pinholes, and edge waviness and evaluates the printability of the patterns quantitatively. The proposed measurement method could be an efficient tool to evaluate and enhance the printability of printed patterns in printed electronics.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.17 no.1
• /
• pp.23-30
• /
• 1980

The reconstruction problem in a low dose case requires some compromise of resolution and noise artifacts, and also some modification of filter kernels depending on the signal-to-noise ratio of projection data. In this paper, ail algorithm for the reconstruction of an image function from noisy projection data is suggested, based on minimum-mean-square error criterion. Modification of the falter kernel is made from information (statistics) obtained from the projection data. The simulation study Proves that this algorithm, based on the Wiener falter approach, provides substantially improved image with reduction of noise as well as improvement of the resolution. An approximate method was also studied which leads to the possible use of a recursive filter in the convolution process of image reconstruction.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.3
• /
• pp.60-67
• /
• 2009

The phase retrieval problem is a problem of reconstructing a signal or the phase of Fourier transform of the signal from the magnitude of its Fourier transform. In this paper we address the problem of reconstructing an unknown signal from the magnitude of its Fourier transform and the magnitude of Fourier transform of another signal that is given by the addition of the desired signal. After we briefly mention the uniqueness conditions under which a signal can be uniquely specified from the given information and key equations of the iterative algorithm, we present mathematical background that the iterative algorithm converges to the desired signal, present an example that illustrates the performance of the reconstruction algorithm, and show its convergence property.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.2
• /
• pp.123-128
• /
• 2002

This study is to develop optical lining device for vacuum binding of PDP and FED. It is very difficult precise technology to line a front board and back board accurately and fast every time when two boards are joined together. Especially, these technology is difficult to be transferred from developed countries. In this study, the accuracy of lining of two boards in vacuum device by developing an optical lining device for vacuum binding as an image processor and CCD camera configured to be high magnification lens with long focus using optical design.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.6 no.2
• /
• pp.37-45
• /
• 1987

Speckle photography is a very useful method for measuring in-plane surface displacement. In its basic form, the object to be studied is illuminated with a divergent laser beam, and a double exposure photograph of the object is recorded, on a fine-grain film or plate, before and after the object is deformed, The magnitude and the direction of the displacement can then be obtained by measuring the spacing and the direction of the Young's fringe, which is produced by probing the developed negative with an unexpaned laser beam, and consists of a pattern of parallel equi-spaced dark bands. In this paper, a hybrid optical and electronic image processing is described-Young's fringe on the viewing screen is observed by a TV-camera and the 2-D video signal is converted from analog to digital and transfered to the computer where the spacing and direction of the fringes are calculated. Several examples of application show that the displacement magnitude and direction can be determined with an accuracy of $0.1{\mu}m\;and\;0.1^{\circ}$ respectively.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.18 no.5
• /
• pp.357-364
• /
• 1998

To investigate accuracies between intensity method and count method for measurement of the fiber orientation distribution, fiber orientation function is derived by drawing simulation figure for the fiber orientation as varying fiber aspect ratio, fiber area ratio, and fiber orientation state, respectively. The values of fiber orientation function measured by intensity method and count method are compared with the calculated ones from simulation figures. The results show that measurement accuracy of fiber orientation angle distribution obtained by count method is by 4% higher than that by intensity method.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.49-52
• /
• 1999

4.8kbps 내외의 전송률에서 양호한 음질을 제공하는 CELP 계열 음성 부호화기 중에서 인터넷 폰 및 화상회의를 목적으로 개발된 G.723.1은 5.3kbps ACELP(Algebraic CELP)와 6.3kbps MP-MLQ(Multi-Pulse Maximum Likelihood Quantization) 두 개의 부호화기를 포함하고 있다[1]. 이 중 MP-MLQ는 고정 코드북 검색 시 많은 계산량으로 인해 실시간 구현에 어려움이 따르고 있다. 이러한 문제점을 개선하기 위해 본 논문에서는 유/무성음을 분리한 후 grid bit를 먼저 결정하여 코드북을 검색하는 방법 제안한다. LSP 파라미터의 분포특성을 이용하여 유/무성음을 분리한 후 무성음에 대해서는 스펙트럼 정보만 전송하고 유성음에 대해서만 코드북 검색을 수행한다. 그리고 코드북 검색 시 Grid bit를 먼저 결정하여 수행하였다. Grid bit는 짝/홀수번째 전체 펄스를 이용하여 합성한 합성음과 DC 성분이 제거된 원음과의 비교를 통하여 결정하였다. 실험 결과 전체 처리시간은 평균적으로 약 $20.55\%$ 감소하였으며 주관적 음질평가 결과 음질 열하는 거의 발생하지 않았다.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.10a
• /
• pp.190-195
• /
• 2001

Flow patterns are very complex and interactive between cylinders. The patterns are turbulent and non-linear caused by various factors. In this paper, flow patterns and pressure gradient around vertical cylinders were investigated by experiment. Changing gaps between cylinders the flow patterns are measured at a fixed coming velocity. Flow patterns showed very complex and closely related to the coming velocity and cylinder space. The pressure gradient around the flow field is observed by twelve hole pitot tubes and manometer. The experiment has been conducted in circulating water channel with PIV system. That can visualize flow patterns. The laser beam was used to reflect the image from particles and recorded by CCD camera. The cylinders were spaced from ID to 5D with 0.5m/sec of incoming flow velocity. The experimental results using pitot tube showed in good agreement with results of precious by others study. The results can be applied in the understanding and design of multiple pile array structures.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.8
• /
• pp.1339-1347
• /
• 1997

The automation of final inspection and tuning process in the manufacturing of electric products is hot issue now, because it is the only part that has not been wholey automized yet, mainly due to the difficulties to handle so small size of VR which is the final tuning point in the most of electric products. For the automation of this process, at first the accurate measurement of position and orientation of SMD VR on PCB in real time is strongly needed. In this paper, a new image processing algorithm to detect the center position and orientation of target VR by using machine vision is proposed for automatic final tuning of the 8mm camcoder's performance. In the method, the outline feature of object is used actively. The usefulness of the proposed methods were tested by several experiments, and the results showed enough accuracy for both of position and orientation. Additatively, we discussed about the total visual system construction and preprocessing of image.