• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.4
• /
• pp.47-54
• /
• 2015

With the spread of smart technology, in the personal and office equipment, many of the products are equipped with smart features. These changes have opened the era that can enforce the user's operation from a remote location. In this study, we design and implement a smart multi-plug system to make a multi-plug installed in the home can be operated anytime and anywhere via wireless network technologies add smart feature to a multi-plug that can be seen easily around us, it is intended to complement the limitations of traditional multi-plugs. The smart multi-plug proposed in this paper, by operating the plug remotely from smart devices at anytime and from anywhere, is possible to provide services required for the weak users such as elderly and children, it is expected that the proposed system are widely used in the various areas requiring remote control of the power supply including u-Farming, terrarium, and smart home, and so on.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.4
• /
• pp.353-358
• /
• 2009

The ability of natural abrasives which were recovered from CRT glass polishing process was evaluated. Comparing the center line average roughness values of a glass polished with new pumice (Ra = $0.039{\mu}m$) and with new garnet (Ra = $0.031{\mu}m$), the glass surface polished with the recycled pumice and the garnet had less pits on the surface with smaller Ra values (Ra = $0.025{\mu}m$ for recycled pumice and Ra = 0.029 for recycled garnet). Recycled rouge contains amorphous glass fragments so that it should be used as a cement replacement rather than recycle into an abrasive. Nnatural abrasives, pumice and garnet powder, which are used in CRT glass polishing process can be recycled into abrasives so that it can help to minimize costs and environmental impact from the production of abrasives and the disposal of waste sludge.

• Convergence Security Journal
• /
• v.19 no.3
• /
• pp.81-86
• /
• 2019

This study introduces trends on silver care implemented with the fourth industrial revolution technology, and discusses the use of digital technology for elderly health and rehabilitation by reviewing relevant literature to examine and present directions for future digital-based silver care commercialization. First, health smart home, which is a smart residential service available through digital technology or IT technology that supports independent living in your home, is available. Second, there are technical services using artificial intelligence(AI) and robots. Robots based on advanced intelligence can serve as an assistant for the health and rehabilitation of senior citizens by supporting services that enable the daily lives of senior, checking their health conditions, and high-quality medical care. For the commercialization of these silver care systems, information and services appropriate to the current situation, such as the physical ability and health status of the elderly, should be provided, and it would be desirable to gradually expand the use of essential technology to reflect the needs of the elderly in use so that the digital alienated.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.6
• /
• pp.565-570
• /
• 2015

In this paper, we implemented the smart door lock system that control remotely devices using the concept of internet of things. Internet of things is intelligent system that can help devices to communicate with people and devices. And recently internet of things is getting attention because of advance of hardware technology and big data. The smart doorlock system based on internet of things used raspberry pi, sensor and doorlock. Using the smart phone, doorlock can be controlled from the raspberry pi server. And the user can identify some people that is in front of doorlock. also user can check around of doorlock in realtime using the raspberry pi camera.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4B
• /
• pp.354-361
• /
• 2011

Increasing interest and technological advances in smart home has led to active research on context-awareness service and prediction algorithms such as Bayesian Networks, Tree-Dimensional Structures and Genetic prediction algorithms. Context-awareness service presents that providing automatic customized service regarding individual user's pattern surely helps users improve the quality of life. However, it is difficult to implement context-awareness service because the problems are that handling coincidence with context information and exceptional cases have to consider. To overcome this problem, we proposes an Intelligent Sequential Matching Algorithm(ISMA), models context-awareness service using Timed Petri-net(TPN) which is petri-net to have time factor. The example scenario illustrates the effectiveness of the Timed Petri-net model and our proposed algorithm improves average 4~6% than traditional in the accuracy and reliability of prediction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.1A
• /
• pp.74-84
• /
• 2008

UWB radio systems have drawn attention during the last few years. These systems are the core technique for ubiquitous home and enable to co-exist with other narrow band systems over the same frequency without interfering them. But UWB signals have a very low power per pulse, so they are affected by strong narrow band interferences. Specially, IEEE 802.11a systems which operate around 5GHz overlap the band of UWB signals and they will interfere with UWB systems significantly. In this paper, we propose a novel narrow band interference suppression method based on singular value decomposition(SVD) algorithm for DS-UWB in IEEE 802.15.4a channel model. The proposed method is very effective and robust for both a single user DS-UWB system and a multiuser DS-UWB system to reduce the narrow band interference.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.11
• /
• pp.1078-1087
• /
• 2014

In the conventional centralized mobility management schemes, it can lead to single points of failure, occurrence of a bottleneck, since all data and control are concentrated on the mobility anchor which is located in home network. In the current research of distributed mobility management, it is doing research into distributed mobility management which is supported by distributed mobility anchors. Such schemes do not consider a failure of the mobility anchor. However, it could be an issue under tactical environment since it occur non-service problem due to anchor movement, maintenance, failure, etc. In this paper, we proposed new DMM scheme named T-DMM(Tactical-Distributed Mobility Management) which can support handover even if mobility anchor breaks down. From the numerical analysis, we evaluate signaling cost and handover latency.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.7
• /
• pp.1131-1137
• /
• 1999

In this paper, a novel design method of an apertured coupled microstrip patch antenna with the single feeding structure is proposed for dual resonance frequencies with mutually perpendicular polarizations. The characteristics of this antenna are experimentally investigated. In order to achieve this goal, a new type of square patch with double notches is used as a radiator and the crossed slot and the bended mictrostrip feeder are adopted for the dual polarizations in the aperture-coupled structure. For the application of the proposed antenna, a Ku-band Tx/Rx $2\times$ subarray antenna is designed and manufactured. Also, the applicability of the antenna as a ground terminal is examined through performance analysis. According to the measurement, the gain of the antenna is 10dBi at the center frequencies of Tx and Rx, the side lobe level is lower than -13dB, and the cross polarization lebel is below 17 dB.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.300-305
• /
• 2003

Reduced activation ferritic (JLF-1) steel is leading candidates for blanket/first-wall structures of the D-T fusion reactor. In fusion application, structural materials will suffer effects of repeated changes of temperature. Therefore, the data base of tensile strength and fracture toughness at operated temperature $400^{\circ}C$ are very important. Fracture toughness ($J_{IC}$) and tensile tests were carried out at room temperature and elevated temperature ($400^{\circ}C$). Fracture toughness tests were performed with two type size to investigate the relationship between the constraint effect of a size and the fracture toughness resistance curve. As the results, the tensile strength and the fracture toughness values of the JLF-1 steel are slightly decreased with increasing temperature. The fracture resistance curve increased with increasing plane size and decreased with increasing thickness. The fracture toughness values of JLF-1 steel at room temperature and at $400^{\circ}C$ shows an excellent fracture toughness ($J_{IC}$) of about $530kJ/m^2\;and\;340kJ/m^2$, respectively.

• Archives of design research
• /
• v.15 no.3
• /
• pp.63-72
• /
• 2002

I made the three main estimated head about the facility of mechanical pencil which we always use in normal days. The head are these, the first is apparent usability by experiment, the second is the feeling when grasping, the third is the feeling when writing. After making the head, 1 selected the head which give the effect to the facility and make sure the interaction between heads by the method of actual test with 36 samples. After this test, 1 can find that there is no high interaction between the facility and the intuitively feeling by experiment. It's because the expectation which was made by experiment for the facility is higher than the real. but there is high interaction between the feeling of wearing and the feeling of writing. The mechanical pencil which has good facility is that the total length is long(169mm), the thickness is big($\Phi$8.5mm), the weight is little bit heavy(21.4g), the intersection is not circle, the surface where is hold by fingers has across grooves, and the body is glossy.