• Journal of the Korea Concrete Institute
• /
• v.13 no.2
• /
• pp.123-129
• /
• 2001

Pozzolan is to improve the strength and the durability of concrete as a result of the pozzolanic reaction, Broadly speaking, pozzolanic materials can be artificial materials, such as slica fume and fly ash, and natural material, such as rice husk ash, clay, volcanic ash, clayish pozzolan. Hwangtoh is a mineral which belongs to a group of matakaolin, especially halloysite, and the main elements is SiO$_2$, Al$_2$O$_3$, Fe$_2$O$_3$. The purpose of this study is to examine the application of Hwangtoh for the concrete admixtures, the composition of this study is shown as follows. Chapter I is analysis for properties of concrete as the kinds of admixture, and Chapter H is analysis for properties of concrete as the replacement ratio of activated Hwangtoh. As a result of this study, Hwangtoh is found to have high practical use as pozzolanic material, and the pertinent range of replacement ratios of Hwangtoh on cement are 10∼20 %.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.262-270
• /
• 2019

Ferronickel slag, which is an industrial byproduct, is activated by mechanochemical reaction as a nonferrous metal and can be used as an admixture. Therefore, ferronickel slag is used as a substitute resource of admixture. In this study, to evaluate the effect of mixed of ferronickel slag powder and admixture, a mortar using a mixture of ferronickel slag powder, quicklime, gypsum and calcium chloride was fabricated by vibrated and rolled manufacturing method. Strength were evaluated by flexural and compressive strength tests, and durability was evaluated by performing chlorine ion penetration resistance and chemical resistance test. When the substitution ratio of ferronickel slag powder is constant, it is considered that the mixed use of quicklime, gypsum and calcium chloride as admixtures increases the performance.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.269-275
• /
• 2022

In this study, the setting time and compressive strength of cement paste composites applied with nano-micro pozzolanic binders were experimental analyzed. The pozzolanic binder was reduced initial and final setting time and the compressive strength was increased. Micro silica was effective in decrease the initial setting and final setting time and impressing the compressive strength. When two or more cement binders were used, the using of silica fume and a small amount of nano silica at reduced the setting time to 62-64 % to OPC cement and the compressive strength was increased to 117 %. A small amount of mixing the nano silica was effect to pore filling and pozzolanic activation. However, the addition of a chemical admixture should be considered when mixing table design because pozzolanic binders high specific surface area causes a decrease in cement composites flow.

• 레미콘
• /
• no.4 s.87
• /
• pp.22-43
• /
• 2006

• 수도
• /
• v.26 no.2 s.90
• /
• pp.55-63
• /
• 2000

• Magazine of the Korea Concrete Institute
• /
• v.8 no.2
• /
• pp.5-12
• /
• 1996

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1187-1195
• /
• 2009

The objective of this study is to investigate the coagulation characteristics of the completely mixed chamber for wastewater treatment. The completely mixed chamber system was composed of the reservoirs, the three-stage mixing and coagulation part with propeller impeller, the injection parts of coagulants, a sedimentation tank and a control panel. Wastewater sample of pH 8.5 and initial turbidity 1,000NTU was prepared using sludge taken from a tunneling work site. The efficiency of turbidity removal with increasing the dosage of coagulant aids increased by about 99%. Increasing coagulant above the optimal dosage, however, the efficiency of turbidity removal decreased.

• Proceedings of the KAIS Fall Conference
• /
• 2007.05a
• /
• pp.267-269
• /
• 2007

콘크리트 중의 철근이 염분에 의해 부식되는 것을 억제 또는 예방하고, 각종 부식 환경으로부터 구조물의 수명을 연장할 목적으로 사용되는 방청혼화제의 최적 formulation과 그에 대한 물성 및 성능 시험을 실시하였다. 철근 부식에 대한 방청 메카니즘의 이해와 방청 혼화제의 formulation에 따른 물성시험과 성능평가를 실시하여 최적 조건을 확립하였다. 성능평가는 콘크리트 공시체의 Slump, 공기량, 압축강도(3일, 7일, 28일) 측정과 함께 염수침지시험 동의 방청성능 평가를 실시하였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.517-518
• /
• 2009

The purpose of this dissertation was to develop a powered pre-mixed shotcrete material for securing a strict quality control by removing the variance of quality at field.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3139-3143
• /
• 2007

The objective of this paper was to investigate the mixing characteristics of an three-stage inline coagulant mixing system experimentally. Wastewater samples of pH 8.5 and initial turbidity 1,000NTU were taken from a site of tunneling work. At the constant dosage, 0.36mL/L, of polymer as coagulant aids, the coagulation efficiency with the dosage of PAC as coagulant was about 4${\sim}$6% at 10 minutes after sampling. In the case of 2 different velocity gradient conditions, the efficiency of turbidity removal was increased about 6.5${\sim}$8% with increasing the dosage of coagulant while, the efficiency was increased about 20${\sim}$21.5% with increasing the dosage of coagulant aids. The efficiency of turbidity removal with the settling time after sampling was about 90% after 1 minute, and the efficiency was about 95% after 5 minutes.