• Asian Journal of Turfgrass Science
• /
• v.17 no.1
• /
• pp.13-17
• /
• 2003

This study was conducted to figure out the effect of KOB Soil on creeping bentgrass‘Cobra’, Kentucky bluegrass (KB)‘Midnight’75% + Perennial ryegrass (PR)‘Palmer III’25%. This experiment was conducted from September 1, 2001 to August 31, 2002 at Hwajoulryong in Jeongsun County, Gwangwon-do. Treatments were Sand 80% + Peatmoss 20%, Sand 80% +KOB-Soil (No. 1) 20%, and Sand 80% +KOB-Soil (No. 2) 20%. Treatments with KOB Soils was superior to control fer the leaf length, number of leaf, turf quality and root length in Creeping bengrass and Kentucky bluegrass + Perennial ryegrass.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.4
• /
• pp.78-86
• /
• 2000

The objective of this research is to understand the characteristics of a nonpremixed, turbulent, hydrogen jet flame which is stabilized in Mach 1.8 coflowing air flows. In order to investigate the flame structure, flame lengths and fuel trajectories were measured by using direct photography, acetone PLIF, Mie scattering techniques, and numerical simulation. Effect of increasing air velocity was investigated when fuel velocity is fixed. The subsonic flame length was decreased drastically, however the supersonic flame length was increased slowly Then the change of flame blow out characteristics was observed as varying fuel nozzle lip thickness. The flame stability can be increased when fuel nozzle lip thickness was increased, which indicates that the minimum fuel lip thickness ratio is required for the stable supersonic flames. Also, it is found that fuel jet is blocked by high pressure zone and low scattering zone is made. Then the fuel that was moving along the recirculation zone had longer residence time within the supersonic flames, which made partially premixed zone.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.6
• /
• pp.814-819
• /
• 2011

An Oxy-fuel combustion has been studied in order to reduce exhaust emissions and fuel consumption. The flow and flame behaviors are analyzed with focal length variation in one-focussing oxygen burner introduced in this study. Oxygen is supplied into the center of the nozzle, methane fuel is into the outer nozzle of the center, and then oxygen is again supplied into the outer of the fuel nozzle. The test conditions are 5 focal lengths of 100mm to 500mm. The mixing behaviors and temperature distributions are analyzed. The result shows that the shorter the focal length is, the longer the mixing length becomes, and the flame width and length are the biggest in the case of 300mm.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.426-430
• /
• 2012

본 연구에서는 3차원 수치 해석 기법으로 SDR 반응기 내 유동 특성을 모사하여 유동 분포 및 체류 시간등을 확인하고 혼합 특성 개선을 위한 방법에 대해 연구하였다. 본 연구 대상 SDR 반응기는 입구 덕트와 반응기 본체의 접속 구간에 가이드 베인(Guide vane)이 설치되어 있고 그 바로 하부 지점에 흡수제를 분무하는 노즐이 설치되어 있다. 이는 처리가스가 반응기로 유입될 때 가이드 베인에 의해 선회류를 형성하여 분무된 흡수제와의 혼합을 촉진시키기 위한 목적으로 설치하였다. 시간당 1,971$m^3/min$ at $260^{\circ}C$의 처리가스가 반응기 상부로 유입되어 가이드 베인을 거쳐 선회류를 형성한 후흡수제와 혼합되어 하부로 배출되는 구조이다. 유동 특성을 분석한 결과, 처리가스가 반응기 중앙으로 강하게 편중되고 있었으며 반응기 양 측면으로 부상 기류가 형성되고 있음을 확인할 수 있다. 또한 강한 편류에 의해 체류시간도 매우 짧은 것으로 판단되는 바, 가이드 베인의 기류 안내 각도가 적합하지 못함을 확인할 수 있었다. 이는 곧 혼합 특성 저하에 따른 미반응 액적의 다량 발생과 함께 고착에 의한 스케일 형성 가능성이 매우 클 것으로 예상되므로 혼합 특성을 개선할 수 있는 설계 변경이 필요할 것으로 판단되었다. 따라서 편류를 해소하고 노즐 근처에서의 체공시간을 확보할 수 있도록 가이드 베인의 안내 각도를 더 크게 변경한 결과, 기존 설계상에서 본체 중앙에 형성되는 편류가 해소되고 선회류의 전개 각도가 커지면서 체류시간 역시 약 5초 이상으로 유지되고 있음을 확인할 수 있었다. 따라서 가이드 베인의 각도만 변경하더라도 본체 형상의 추가적인 변경없이 유동의 혼합 특성을 개선시킬 수 있을 것으로 판단되었다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.1
• /
• pp.33-37
• /
• 2005

A micromixer plays an important role in Bio-MEMS or μ-TAS. Mixing is generally generated by turbulence and interdiffusion of two fluids. Because of low Reynolds number values (Re << 2000) within microchannels, it is difficult to generate turbulence, and consequently mixing mainly depends on interdiffusion. So, channel distance is often prohibitively long to mix two different fluids properly. To reduce this mixing length, we proposed a new mixer for micromixing in which two fluids were effectively mixed by an ultrasonic wave generated by PMN-PT. The ultrasonic wave was radiated into a chamber In the cross-sectional direction into the boundary surface formed by two fluids. The two fluids were positioned one on top of the other. The mixing state was measured by observing the color of samples due to the reaction of NaOH and phenolphthalein.

• Resources Recycling
• /
• v.3 no.2
• /
• pp.28-34
• /
• 1994

A part of used cables, such as electric and communication cables has already been recycled by using simple processing methods. However, it has been found that the main problems in recycling of the used cables are insufficient treatment of fine stranded wires and low recovery of copper by air separation process. It has been shown that copper can be effectively separated from the PE using a solvent treatment method. In the present study, the used communication wires having diameter of 0.4 mm are treated in the mixing solution of toluene and water at $86^{\circ}C$ for about 10 minutes. In the solvent treatment, the copper wires recovered have 10~15mm length, which are much longer than that of 1~2mm length copper wires recovered by air table concentration method used in current recycling plants. The process consisting of cutting, air separation and electrostatic separation would be recommendable for the treatment of mixed cables. In this investigation, fine copper powders can also efficiently be recovered from insulation materials using electrostatic separator at the conditions of 20~50RPM roller speed and 15~30KV high DC power.

• The Journal of the Korea Contents Association
• /
• v.15 no.8
• /
• pp.53-68
• /
• 2015

This study analyzed online word-of-mouth information using content analysis to help practical categorization of two-sided eWOM. A total of 402 online consumer reviews on search goods and experience goods were collected. Descriptive characteristics(information direction, length of review line) and content structural characteristics(product benefit types, information presentation methods) were used as analysis criteria. The study results are as follows. First, the types of two-sided e-WOM direction were made of positive/negative, negative/positive, positive/negative/ positive, and negative/positive/negative. Second, the length of two-sided eWOM was longer than the length of one-sided eWOM and blended type accounted for the highest proportion both one-sided and two-sided eWOM at the aspect of product benefit. Third, holistic presentation method was overwhelmingly high in one-sided eWOM, whereas blended and analytic presentation methods were somewhat high in two-sided eWOM. Fourth, holistic presentation method was high in search goods, whereas blended and analytic presentation methods were high in experience goods. Based on these results, implications for two-sided e-WOM study and further research issues were discussed.

• Asian Journal of Turfgrass Science
• /
• v.26 no.2
• /
• pp.110-115
• /
• 2012

Soil amendments have been used to improve the physical and chemical condition of turf soil, which might optimize turfgrass growth in golf courses. This study was to investigate the effect of inorganic soil amendment (ZC) established in USGA root zone system on growth of creeping bentgrass, cv. 'Penncross' carried out from May to Dec. in 2005 at the nursery on Sinwon Golf Course. To analyze the effects of inorganic soil amendment on pH, specific gravity, infiltration rate, water content, soil hardness, root length, tiller density and dry weight were measured. pH was 6.7-6.8, specific gravity of sand (S) 100% was 1.48 heavier than the other treatments (1.28-1.38). Infiltration rate with ZC 15% + peat moss (P) 5% + S 80% and ZC 10% + S 90% was faster than S 100%. Soil hardness of S 100% was the highest. Root length of creeping bentgrass of P 10% + S 90% (8.6-12.0 cm) was the longest. Tiller density with P 5% + S 95% was more 4-7 ea than other treatments in summer season. In growing season, however, ZC 10% + P 5% + S 85% was more 2-3 ea than others. Dry weight of creeping bentgrass treated by ZC 10% + P 5% + S 85% in summer season and P 5% + S 95% in growing season were heavier than other treatments. It is recommended to combine 5-15% inorganic soil amendment and peat moss 5% with sand in order to sustain soil balance.

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.356-363
• /
• 2014

This work was conducted to investigate the field growth and yield of the sweetpotato (Ipomoea batatas) slips grown under different light emitting diodes (LEDs). Sweet potato cuttings of 3 cultivars ('Matnami', 'Shinhwangmi', and 'Yeonhwangmi') were cultivated under fluorescent lamp (FL) and several LEDs (PPF $150{\pm}5{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ at 20cm distance) in deep flow culture system for 20 days. The plants were acclimatized under sunlight for 10 days, and then cuttings (30cm length) were planted with $75{\times}25cm$ planting density on June 10th, covered with black vinyl film during growth period. Length and diameter of vine, number of root were excellent in the red plus blue (7:3) LED than the other treatments. At 30 days after planting, the survival rate in red plus blue (7:3) LED was significantly higher than that in FL and red LED, and it was not different among cultivars. Vine length, vine diameter, and number of node were not significant among LED light qualities and cultivars. After 120 days in the field cultivation, vine length, vine diameter, number of node, number of branch, and fresh weight of shoot were not significant among LED light qualities, but those except the number of branch showed significant differences among cultivars. Yield characteristics among LED light colors were not significant, but weight of storage root per plant, mean weight of storage root, and yield showed significant differences among cultivars. The yield per 10a in 'Matnami', and 'Yeonhwangmi' was significantly higher than that in 'Shinhwangmi'.

• Journal of the Korean Chemical Society
• /
• v.48 no.5
• /
• pp.483-490
• /
• 2004

We have developed a novel polymerase chain reaction (PCR)-microchip gel electrophoresis (MGE) method based on the sieving gel mixture of commercially available poly(vinylpyrrolidone) (PVP) and hydroxy ethyl cellulose (HEC) for the rapid detection and diagnosis of the orf virus (ORFV) from Korean indigenous goat. After amplification of 594-bp DNA fragment from the B2L gene of ORF virus, the amplicon was analyzed by the MGE separation. The glass microfluidic chip (64 mm total length (36 mm effective length)${\times}$90 ${\mu}$m width${\times}$20 ${\mu}$m depth) allowed the fast detection and diagnosis of ORFV in the mixture of 1.0% PVP ($M_r$ 360,000) and 1.0% HEC ($M_r$250,000) as a sieving matrix with better resolution and reproducibility of DNA fragments. Under the electric field of 277.8 V/cm, the 594-bp DNA was analyzed within 4 min. Compared to traditional slab gel electrophoresis, the PCR-MGE method was twenty times faster and an effective clinical method for the quantitative analysis of ORFV.