• Journal of Life Science
• /
• v.26 no.10
• /
• pp.1153-1162
• /
• 2016

Termitomyces albuminosus (Berk.) Heim is a well-known wild edible mushroom in the southern region of China. Novel cerebrosides, termed termitomycesphins, isolated from EtOH extract of T. albuminosus have shown significant neuritogenic activity. Neurotrophic factors have been targeted as potential therapeutic drugs for the treatment of neurodegenerative disorders. However, before expanding their applications to include food or therapeutic agents in Korea, a safety evaluation of T. albuminosus is needed. Herein, in a repeated-dose 90-day oral toxicity study, rats were exposed to a basal diet of powder ground from dried T. albuminosus at dose levels of 5%, 2.5%, 1.25%, and 0%. The following endpoints were evaluated: clinical observation, body weight, gross and microscopic pathology, clinical chemistry, and hematology. Significant dose-dependent increases in the weight of the left kidney were observed, possibly due to the test substance. Based on toxicity-decision criteria for minor compound-related changes (no observed adverse effect level [NOAEL] and no observed effect level [NOEL]), NOAEL was observed in male rats at a dose of 5% of dried T. albuminosus powder, and NOEl was observed in female rats at the same dose. The results point to the safety and potential use of T. albuminosus as a nontoxic neurotrophic factor.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.1
• /
• pp.45-51
• /
• 2015

PBDEs (polybrominated diphenyl ehters) are rarely dissolved in water due to their strong hydrophobicity and large molecular mass so not many researches were done in aqueous environment compared to other environmental compartments. However, the mass loading from wastewater treatment plant into aquatic environment, re-suspension from bottom sediment and partitioning from floating particles and colloids may not be negligible. It is, therefore, important but also difficult to investigate PBDEs in water environment. Recent overcoming resolution towards this barrier to monitor hydrophobic organic compounds in aquatic environment is using passive sampling technique like semipermeable membrane device. By using passive sampling, it might be possible to obtain long-term reproducible monitoring result and detect the trace amounts of PBDEs, with controlling fluctuation of surrounding environmental factors during the sampling event. So therefore, this study is purposed to confirm the possibility of using SPMD (semi-permeable membrane device) as water monitoring tool. Grab samples, composite samples and SPMDs were applied in river bank to evaluate the concentration difference and temporal fluctuation by various water sampling method, and to assess the water concentration prediction capability of SPMD for the PBDEs.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.3
• /
• pp.245-253
• /
• 2001

To investigate the effects of hydromechanical and textural characteristics of sediment deposits on the cultivation of Manila clam, Ruditapes philippinarum surface and sub-surface core sediments were collected seasonally in Gomso tidal flat. Grain size distribution were analyzed to investigate the annual variation of sediment texture. In winter unimodal distribution of grain size with the peak at $5\phi$ is dominant However, during the summer sediment texture become a little bit coarser and grain size distribution shows the peaks at $4\~5 \phi$. Optimum sediment texture for the cultivation of manila clam, R. philippinarum was found to be sandy silt in which mean Brain size was between 4 and $5 \phi$ with the sand content less than $50\%$ and clay content of $5\~10\%$. Mechanical and hydrological characteristics of sediment deposits were also studied in the laboratory and the results were applied to the numerical simulation for the behavior of surface sediment subjected to the cyclic loading from sea-water level change. Results of numerical simulation illustrate that the permeability of sediment had to be maintained in the range of $10^{-11}\sim10^{-12}m^2$ to ensure the proper sedimentological environment for the cultivation of manila clam, R. philippinarum. The deposits of virtually impermeable mud layer, with the threshold thickness of 4 cm, would be very hazardous to clam habitat.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.04a
• /
• pp.21-21
• /
• 2018

본 연구는 북방계 식물에 속하는 두메우드풀[Woodsia ilvensis (L.) R.Br.]의 전엽체 증식 및 포자체 형성을 위한 적정방법을 구명하고자 수행되었다. 식물재료는 경상북도 의성군 일대에서 채취한 후 청주의 일반하우스에 이식하여 재배하였다. 포자 성숙기인 8월에 채종하여 발아시켰으며, 포자로부터 획득한 전엽체를 8주간 계대하면서 실험재료로 사용하였다. 전엽체 300mg을 메스로 다진 후 배지농도 및 종류(Knop, 1/4, 1/2, 1 및 2MS)를 달리하여 8주간 배양하였다. 배양실의 온도는 $25{\pm}1.0^{\circ}C$, 광도는 $30{\pm}1.0{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$(16/8h)로 조절되었다. 연구의 결과, 배지구성물질의 농도가 높았던 2MS배지에서 전엽체의 생체중이 12.4g으로 41배 증가하여 가장 높은 증식율을 나타냈다. 또한 배지구성물질의 농도가 적을수록 생체중의 증가폭도 함께 감소하는 경향을 보였다. 포자체 형성에 적합한 토양조건을 확인하고자, 원예상토, 피트모스, 펄라이트 및 마사토의 비율을 달리한 5종류의 혼합토양을 조성하여 사각분($7.5{\times}7.5{\times}7.5cm$)에 충진하였다. 다음으로 전엽체 1g을 핸드블랜더로 10초간 분쇄 후 충진된 사각분 위에 고르게 분주하여 14주간 재배하였다. 재배환경은 온도 $25{\pm}1.0^{\circ}C$, 광도 $43{\pm}2.0{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$(16/8h) 및 습도 $72{\pm}2.0%$로 조절되었다. 지베렐린 수용액이 포자체 형성에 미치는 영향을 조사하고자, 선행연구에서 선발된 토양조건을 기준으로 침지농도(0, 50, 100, $200mg{\cdot}L^{-1}$)를 조절하여 1시간 침지 후 상기와 동일한 방법으로 재배하였다. 연구의 결과, 원예상토와 펄라이트 또는 마사토를 2:1(v:v)로 혼용한 토양에서 사각분 당 109.5, 128.8개의 포자체가 형성되었다. 한편, 피트모스가 첨가된 처리는 포자체의 형성이 억제되는 경향을 나타냈다. 지베렐린 50과 $100mg{\cdot}L^{-1}$ 수용액에 침지한 처리에서 무처리에 비해 많은 사각분 당 각 177.0, 181.7개의 포자체가 형성되었으며, 생육도 양호하였다.

• Journal of agricultural medicine and community health
• /
• v.40 no.2
• /
• pp.80-92
• /
• 2015

Objectives: To clarify the association between dust from large construction sites and allergic and respiratory conditions among residents in Sejong city. Methods: We included 379 individuals older than 50 years from three areas of Sejong city; two areas near construction sites and one area for a comparison. Prevalence of self-reported allergic and respiratory conditions was compared across the three areas using logistic regression to adjust for covariates including age, gender, smoking, and educational attainment. A total of 16 individuals were interviewed to take details of the residents' experiences of construction work. Results: Those living in the nearby areas around construction sites were generally found to have the increased prevalence for all allergic and respiratory conditions. Odds Ratio(OR)s for cough and sneezing among the six symptoms and allergic rhinitis among the three diagnosed diseases reached statistical significance but only OR for cough remained significant after adjustment: adjusted OR for cough was 2.63 (95% CI, 1.07-6.46). Two relevant themes emerged from semi-structured interview were; 1) most residents from the affected area reported a considerable level of exposure to construction dust, 2) about half of them noted that construction dust influences allergic- and respiratory health. Conclusions: General pattern provides suggestive evidence that living close to construction sites may be positively associated with elevated risks of allergic and respiratory conditions. Efforts should be made to establish preventive measures and a comprehensive in-depth health impact assessment on this issue.

• Journal of Adhesion and Interface
• /
• v.3 no.4
• /
• pp.1-9
• /
• 2002

The main goal of this study was to analyze the effect of process additives, i.e. maleated polypropylene (MAPP), and nucleating agent on the viscoelastic properties of different types of extruded polypropylene-wood plastic composites manufactured from either PP homopolymer, high crystallinity PP or PP impact copolymer using dynamic mechanical thermal analysis. And also, the esterification reaction between wood flour and maleated polypropylene, and its role in determining the mechanical properties of wood flour-polypropylene composites was investigated. The wood plastic composites were manufactured using 60% pine wood flour and 40% polypropylene on a Davis-Standard $Woodtruder^{TM}$. Dynamic mechanical thermal properties, polymer damping peaks(than ${\delta}$), storage modulus (E') and loss modulus (E") were measured using a dynamic mechanical thermal analyzer. XPS (X-ray Photoelectron Spectroscopy), also known as ESCA (Electron Spectroscopy for Chemical Analysis) study of wood flour treated with MAPP was performed to obtain information on the chemical nature of wood fiber before and after treatment. To analyze the effect of frequency on the dynamic mechanical properties of the various composites, DMA tests were performed over a temperature range of -20 to $100^{\circ}C$, at four different frequencies (1, 5, 10 and 25 Hz), and at a heating rate of $5^{\circ}C/min$. From these results, the activation energy of the various composite was measured using an Arrhenius relationship to investigate the effect of maleated PP and nucleating agent on the measurement of the interphase between the wood and plastic of the extruded polypropylene wood plastic composites.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.5
• /
• pp.209-220
• /
• 2002

Because the allowable current loading of buried electrical transmission cables is frequently limited by the maximum permissible temperature of the cable or of the surrounding ground, there is a need for cable backfill materials that can maintain a low thermal resistivity (less than 5$0^{\circ}C$-cm/watt) even while they are subjected to high temperatures for prolonged periods. Temperatures greater than 5$0^{\circ}C$ to 6$0^{\circ}C$ may lead to breakdown of cable insulation and thermal nlnaway if the surrounding backfill material is unable to dissipate the heat as rapidly as it is generated. This paper describes the results of studies aiming at the development of backfill material to reduce the thermal resistivity. A large number of different additive materials were tested to determine their applicability as a substitute material. Tests were called out for DonUing river sand, a relatively uniffrm sand of very high thermal resistivity (5$0^{\circ}C$ -cnuwatt at 10% water content, 26$0^{\circ}C$-cm/watt when dry), and Jinsan granite screenings, and A-2(sand and gravel mixture), E-1 (rubble and granite screenings mixture), a well-graded materials with low thermal resistivity (about 35$^{\circ}C$ -cm/watt when at 10 percent water content, 10$0^{\circ}C$-cm/watt when dry). Based on this research, 3 types of backfill materials were suggested for improved materials with low thermal resistivity.

• Korea Journal of Hospital Management
• /
• v.22 no.4
• /
• pp.33-49
• /
• 2017

Background: Health care utilizations and costs of the patients with degenerative lumbar spine disease in Korea increased dramatically. We analyzed whether hospital market competition is associated with charges and length of stay for patients with degenerative lumbar spine disease. Methods: We used Medical claims data of 2002 and 2010 from the nationwide representative sample of National Health Insurance Service of Korea. The study subjects were inpatients with degenerative lumbar spine disease (N=24,768) in 2002 and 2010. We employed a multilevel linear mixed model that included patient- and hospital-level variables in hierarchical data. Results: Higher hospital competition was associated with lower charges (${\beta}=57.5$, p<.0001 in 2002; ${\beta}=353.7$, p<.0001 in 2010) and shorter length of stay (${\beta}=0.3$, p<.0001 in 2002; ${\beta}=0.9$, p<.0001 in 2010) in both 2002 and 2010. Compared to 2002, the magnitude of such association became greater in 2010. However, subgroup analyses show that the influence of competition on charges and length of stay differed by hospital size. Conclusions: This study showed that hospital market structure (e.g., hospital competition) affects hospital efficiency (i.e., hospital charges and length of stay). It is necessary to continue to monitor how changing market structure influences hospital outcomes, including more detailed outcomes such as patient satisfaction.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.1
• /
• pp.159-168
• /
• 2011

In this study, we find out the feasibility of self-consolidating concrete with EP nylon fiber. Three kinds of method were used; when length of nylon fiber is differed for the experiment to investigate usability of nylon fiber with enhanced performance by dispersing-agent coating in self-consolidating concrete, when mixing in other organic fibers (polypropylene, cellulose) and in case of Binary Blended and Ternary Blended concrete mixed with different types of mineral admixtures (blast-furnace slag and fly ash). Based on the results of the experiment described above, comparison was made on the basic properties and dynamic characteristics of general fiber reinforced concrete mixed with enhanced performance nylon fiber and SCC mixed with enhanced performance nylon fiber as a Mock-up test prior to the experiment of application to the actual structure. Considering characteristics and durability of the fresh and hardened self-compacting concrete, dynamic characteristics and durability were found to be more outstanding when using nylon fiber for the mineral admixtures used, dynamic characteristics and durability were found to be more outstanding when using blast-furnace slag.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.5
• /
• pp.245-252
• /
• 2006

This experiment was conducted to investigate the distribution and compositions of clay mineral and to replenish the soil classification system in Korea. Soil layer samples were collected from 26 residuum and colluvium soil series out of 390 soil series in Korea, and then analyzed for soil physical and chemical characteristics, mineral and chemical compositions of clay in B horizon soils. Major clay minerals of residuum and colluvium were illite and chlorite in soils originated from the sedimentary rock such as limestone, shale, sandstone and conglomerate; quartz and kaolin in soils originated from rhyolite, neogene deposits, porphyry and tuff; and kaolin and quartz in the soils originated from granite, granite gneiss and anorthosite. Clay minerals in Korean soils were divided into 4 groups: mixed mineral group(MIX) mainly contained with illite, kaolin and vemiculite; kaolin group(KA) with kaolin and illite; chlorite group(CH) with chlorite and illite; and smectite group(SM) with kaolin, illite and smectite. The most predominant clay mineral group was kaolin group(KA) with kaolin and illite; an mixed mineral group(MIX) with illite, kaolin and vemiculite. Cation exchange capacity (CEC) of clay was low in the soils mainly composed with MIX and KA groups and silica-alumina molar ratio of clay was high in the soils composed with SM group