• Korean Journal of Optics and Photonics
• /
• v.9 no.1
• /
• pp.20-24
• /
• 1998

Fiber four-wave mixing(FWM) in zero-dispersion wavelength region is studied. FWM efficiency of -26 dBm and bandwidth of 2nm are measured. The linear dispersion slope in zero-dispersion wavelength region is calculated from the modulation behavior of FWM efficiency.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.1
• /
• pp.101-107
• /
• 2020

We propose a realistic seeing through visualization methods in mixed reality environment. When a user wants to see specific location beyond a wall in indoor environment. The proposed system recognizes and registers the selected area using environment modelling and feature-based tracking. Then the selected area is diminished and the specific location is visualized in real-time. With the proposed seeing through methods, a user can understand spatial relationship of the building and can easily find the target location. We conducted a user study comparing the seeing through method to conventional indoor navigation service in order to investigate the potential of the proposed seeing through method. The proposed seeing through method was evaluated in navigation time in comparison with conventional approach. The proposed method enable users to navigate target locations 30% faster than the conventional approach.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.2
• /
• pp.397-401
• /
• 2005

In this paper, we have developed a frequency mixer which can be used as a microwave phase conjugator in the retrodirective array antenna. The retrodirective array, which can reflect the incident wave retrodirertively back to the source direction without any priori information, requires phase conjugators to achieve the phase change of 180 degrees for the incoming signal. frequency mixers can efficiently serve as phase conjugators. The circuit topology is of the 2-port structure to avoid the complexity of LO and Rf signal combination and matching circuits, using a pseudomorphic HEU device. The operating frequencies are 4.0 CHz, 2.01 CHz, and 1.99 CHz for LO, RF, and If signals, respectively. Conversion loss is measured to be -ldB and 1-dB compression point -l5 dBm at the LO power of -10 dBm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.6
• /
• pp.661-670
• /
• 2013

In this paper, we propose the measurement techniques of mixed waveform. Mixed waveform has phase-continuous periodic waveform with fixed frequency signal and Linear Frequency Modulation(LFM) signal. This waveform is generated from a compact radar transmitter with frequency synthesizer and high power amplifier. Frequency synthesizer generates various signal waveform with continuos phase and high power amplifier amplify transmitting signal. First, we describe a compact radar transmitter with the phase-continuos signal and then verify the distortion characteristic of pulse compression by the mismatch of LFM waveform. Second, we describe three kinds of measurement techniques for measuring LFM waveform. These techniques include methods using signal analyzer, signal source analyzer and new methods using RF mixer and phase shifter. Finally, we verify the accuracy of the measurement technique from the pulse compression result of receiving signal.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.127-132
• /
• 2018

In this paper, a high conversion gain cascode mixer was designed in W-band and verified by the fabrication and measurements. In the high frequency band such as a W-band, the conversion loss of a mixer is increased because of the poor performance of transistors. This high conversion loss of the mixer requires additional circuits which can give an extra gain such as an RF buffer amplifier, and this can affects the linearity and stability of the overall systems. Therefore, it is necessary to maximize the conversion gain of the mixer. To maximize the conversion gain of the mixer, biases of the transistor were optimized, and output load impedance was optimized by the load-pull simulations. The designed mixer was fabricated in $0.1-{\mu}m$ GaAs pHEMT technology and verified by the measurements. The measurement results shows a maximum conversion gain of -4.7 dB at W-band and an input 1-dB compression point of 2.5 dBm.

• Journal of Broadcast Engineering
• /
• v.7 no.3
• /
• pp.229-237
• /
• 2002

Natural synthesis of real and virtual images is a key technology in mixed reality. For this purpose, we propose an efficient dense disparity estimation algorithm and a synthesis algorithm considering features of stereo images. Dense disparities are estimated hierarchically from the low to high resolution images. In the process, the region-dividing-bidirectional-matching algorithm makes matching process efficient and keeps the reliability of the estimated disparities, and dense disparities are assigned considering edge information. finally, mixed reality stereo images are synthesized by comparing depth data of real and virtual Images. Computer simulation shows that the proposed algorithms estimate very stable disparity vectors with sharp edge and synthesize natural stereo mixed reality images.

• Journal of the Korea Computer Graphics Society
• /
• v.14 no.2
• /
• pp.1-8
• /
• 2008

This paper presents a design of a situation training system supporting mixed-reality for the developmental disabled. The training scenario is developed for the disabled to improve the sense of sight and perception. The user sticks a virtual pin into a hole in the working board according to the direction and the appropriate feedback is delivered based on the FSM(Finite State Machine). In order to improve the reality and the training effect, the user's hand is inserted in the virtual training environments and the tactile sensation is provided using the haptic device.

• Smart Media Journal
• /
• v.1 no.3
• /
• pp.15-21
• /
• 2012

Depth information is necessary for various three dimensional contents generation. Depth acquisition techniques can be categorized broadly into two approaches: active, passive depth sensors depending on how to obtain depth information. In this paper, we take a look at several ways of depth acquirement. We present not only depth acquisition methods using discussed ways, but also hybrid methods which combine both approaches to compensate for drawbacks of each approach. Furthermore, we introduce several matching cost functions and post-processing techniques to enhance the temporal consistency and reduce flickering artifacts and discomforts of users caused by inaccurate depth estimation in 3D video.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.1
• /
• pp.25-33
• /
• 1998

In this paper, we describe a single-gate MESFET mixer at PCS(Personal Communication Service) frequency band. The PCS frequency band is 1965~2025 MHz in FR and 140 MHz in IF irrespectly. The design of the mixer was executed by microwave simulator, EEsof Libra. The matching network is consisted of rectangular inductor, MIM capacitor and open stub. The ma- nufacture work was accomplished by the micro-pen and wedge-bonder. The mixer showed $6.69\pm0.65$ dB of conversion gain, $-14.9\pm3.5$dB of RF reflection coefficient and 57.83 dB of LO/IF isolation at 10 dBm of LO power when LO frequency is 1855 MHz. When this mixer is used at PCS terminal, IF-amplifier which compensates the conversion loss of diode mixer may be omitted.

• Journal of Biomedical Engineering Research
• /
• v.20 no.4
• /
• pp.419-425
• /
• 1999

In this paper, we present an algorithm of real time facial expression and gesture recognition for image sequence on the gray level. A mixture algorithm of a template matching and knowledge based geometrical consideration of a face were adapted to locate the face area in input image. And optical flow method applied on the area to recognize facial expressions. Also, we suggest hand area detection algorithm form a background image by analyzing entropy in an image. With modified hand area detection algorithm, it was possible to recognize hand gestures from it. As a results, the experiments showed that the suggested algorithm was good at recognizing one's facial expression and hand gesture by detecting a dominant motion area on images without getting any limits from the background image.