• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.702-704
• /
• 2011

For the representative of the poor performance of liquid fuel(Jet A-1), the physical properties effests of different additive ratios in the liquid fuel have been investigated. The mixed liquid fuel could be analyzed by principal factor of liquid fuel such as, density, viscosity and caloric value. This additives will be usefully applied to high energy density liquid fuel development.

• Plant Journal
• /
• v.12 no.3
• /
• pp.39-45
• /
• 2016

Each of fuel consumption per hour was measured at the 320 MW and 380 MW generator output while changing mixing ratio of bio fuel oil to 50%, 80% and 100%. Fuel consumption per hour was increased from 11.0% to 20.4% as mixing ratio of bio fuel oil was changed from 50% to 100% at the 320 MW generator output comparing with fuel consumption per hour in case of bunker-C oil single firing. Fuel consumption per hour was also increased from 12.0% to 21.1% as mixing ratio of bio fuel oil was changed from 50% to 100% at the generator output 380 MW. Furthermore, it was confirmed that plant efficiency was decreased as mixing ratio of bio fuel oil was increased from 50% to 100% as a result that plant efficiency was calculated using the measured fuel consumption per hour, the generator output and the gross heating value.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.579-584
• /
• 2007

대두유로부터 생산된 바이오디젤과 바이오디젤 혼합 연료유를 대상으로 지방산메틸에스터 함량과 화학적 분석을 통해 산화 특성과 오일의 수명 예측 연구를 수행하였다. 바이오디젤, 경유, BD5, BD20은 산화가 진행될수록 산가(Acid number), 동점도(Kinematic Viscosity) 및 밀도(Density)는 증가하였다. 산가 측정결과의 활용에 의해 임의의 온도조건에서 정확한 사용수명을 예측하기 위하여 화학속도론에 의거하여 각각의 연료에 대한 사용수명식을 도출하였다. 도출된 사용수명식으로부터 바이오디젤이 가장 빠르게 산화가 진행되었고 바이오디젤 혼합량이 증가할수록 사용수명이 단축되는 것을 확인할 수 있었다.

• New & Renewable Energy
• /
• v.3 no.2 s.10
• /
• pp.17-23
• /
• 2007

대두유로부터 생산된 바이오디젤과 바이오디젤 혼합 연료유를 대상으로 지방산메틸에스터 함량과 화학적 분석을 통해 산화 특성과 오일의 수명 예측 연구를 수행하였다. 바이오디젤, 경유, BD5, BD20은 산화가 진행될수록 산가(Acid number), 동점도(Kinematic Viscosity) 및 밀도(Density)는 증가하였다. 산가 측정결과의 활용에 의해 임의의 온도조건에서 정확한 사용수명을 예측하기 위하여 화학속도론에 의거하여 각각의 연료에 대한 사용수명식을 도출하였다. 도출된 사용수명식으로부터 바이오디젤이 가장 빠르게 산화가 진행되었고 바이오디젤 혼합량이 증가할수록 사용수명이 단축되는 것을 확인할 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1081-1086
• /
• 2014

An experimental study was performed in order to compare with the case of using pure diesel the characteristics of combustion pressure and exhaust emissions when the engine speed was changed in a CRDI 4-cylinder diesel engine using biodiesel( Canola oil) blended and pure diesel fuel. As a results, the combustion pressure was decreased with increasing biodiesel blended rate when engine speed was 1,000, 1,500, 2000(rpm). but the combustion pressure of the engine speed 2,500rpm was increased with increasing biodiesel blended rate. The emission results show, that CO was decreased with increasing biodiesel blended rate and engine speed. The emission of $CO_2$, NOx, were increased with increasing biodiesel blended rate and engine speed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.7
• /
• pp.609-615
• /
• 2015

In this study, the combustion and exhaust emission characteristics in a gasoline direct injection engine with variations of the bio-ethanol-gasoline blending ratio and the excess air factor were investigated. To investigate the effects of the excess air factor and the bio-ethanol blends with gasoline, combustion characteristics such as the in-cylinder combustion pressure, rate of heat release (ROHR), and the fuel consumption rate were analyzed. The reduction of exhaust emissions such as carbon monoxide (CO), unburned hydrocarbon (HC), and nitrogen oxides ($NO_x$) were compared with those of gasoline fuel with various excess air factors. The results showed that the peak combustion pressure and ROHR of bio-ethanol blends were slightly higher and were increased as bio-ethanol blending ratio is increased. Brake specific fuel consumption increased for a higher bio-ethanol blending ratio. The exhaust emissions decreased as the bio-ethanol blending ratio increased under all experimental conditions. The exhaust emissions of bio-ethanol fuels were lower than those of gasoline.

• Journal of Energy Engineering
• /
• v.26 no.4
• /
• pp.1-6
• /
• 2017

This study evaluated hydrogen effect of metal and non-metallic materials used in the hydrogen blended natural gas vehicle. Hydrogen penetrated concentration of 34Cr-Mo steel(850MPa tensile strength) for winter driving conditions was measured 0.0018ppm and summer driving conditions was 5.3ppm. The critical hydrogen concentration of high strength metal used in this study was measured 1.03ppm by CLT. Therefore, 34CrMo steel cas cause problems in the 30% HCNG(25MPa) environment. In case of the test for non-metallic materials, all materials met the criteria of the gas resistance test, but Fluorocarbon Rubber material had a significant change in the volume. So if it is used, extra care is needed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.2-2
• /
• 2000

액체연료를 사용하는 엔진의 인젝터에 대한 연구는 연소효율에 중대한 영향을 미치는 분무 액적의 크기 및 분포 특성 연구에 초점을 두어왔다. 그러나 액체 로켓 엔진은 고온, 고압의 연소실 내에서 액체상태의 연료 및 산화제 액적이 매우 빠르게 기화되기 때문에, 미립화 특성 보다는 연료와 산화제의 혼합특성이 연소효율을 결정하는 변수로 작용하게 된다. 또한 분사된 액체 추진제는 미립화 단계 이전에 기화되어 초기 화염을 형성하므로, 분사 직후의 연료/산화제의 혼합과정을 이해하는 것은 상당히 중요하다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.11a
• /
• pp.14-14
• /
• 2000

가스터빈 연소기의 연소 효율을 높이기 위해서는 연료와 공기의 충분한 혼합이 필요하다. 연료와 흡입되는 공기의 혼합은 큰 스케일의 난류 성분보다는 오히려 연소기내에서 국부적으로 작용하는 작은 스케일의 난류 성분에 크게 지배를 받게된다. 이러한 혼합 촉진을 위해 연료와 공기의 경계면에서의 운동에너지를 증가시키는 방법은 압력의 손실을 가져오게 되지만 혼합의 촉진에 의한 완전연소와 저 NOx화는 더 큰 이익을 가져다 준다.(중략)

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.274-277
• /
• 2004

Fuel/air mixing in air turbo ramjet(ATR) combustor is a significant parameter of combustion stability and efficiency. In this study, fuel distribution in the ATR model combustor was measured to compare the degree of mixing with respect to the velocity ratio$(r=v_a/v_f)$ between fuel gas and air. Planar laser-induced fluorescence(PLIF) and image processing method were used to obtain two dimensional fuel distribution. Fuel mixing went bad with approaching to r=1.