• Journal of the Korean Society of Food Science and Nutrition
• /
• v.17 no.3
• /
• pp.191-197
• /
• 1988

Sorption properties of corn starch(CS) and Soy protein isolates(SPI) in plastic films packaging were investigates for binary system. The mixture were sealed in plastic films of low density polyethylene(LDPE), oriented polypropylene(OPP) and LDPE/OPP coated film and packaging effect on the changes of moisture sorption during storage at $40^{\circ}C$ were studied. The following results were obtained. The water vapor permeability of material films was $32.6g/m^2/24hrs(below\;g)$ for 0.02mm LDPE film, 14.01g for 0.04mm LDPE film, 7.30g for 0.02mm OPP film, 3.37g for 0.04mm OPP film and 4.869 for 0.02mm LDPE/0.02 mm OPP confine film at $40^{\cire}C$ 90%RH, therefore the OPP film was more effective than LDPE film on the resistance of relative humidity. And the OPP film packaging sealed mixture of food samples was also more elective then LDPE film, having same thickness for increase of water vapor permeability during storage at $40^{\cire}C$. A general increase in sorption rate was found more in SPI than CS in the packaged mixtures.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.4
• /
• pp.55-64
• /
• 2017

In order to assess the spatial and dynamic changes in bamboo forests, this study used the national-level spatial data between 1980 and 2010 to extract spatial information of bamboo forests through GIS technology. The results showed that the distribution types were mainly expansion, normal, mixed, damage, and separation. In case of mixed bamboo forest in the Sacheon region, the expansion characteristics were: area 2.5 ha, velocity 0.08 ha/yr, and distance 1.1 m/yr. The Phyllostachys pubescens forest in the Geojae region showed the following characteristics: area 1.9 ha, velocity 0.06 ha/yr, and distance 0.9 m/yr with where along from valley to ridge. This approach could provide a valuable tool for decision-making and implementations such as the bamboo forest management plan, environmental impact assessment for a preventing the bamboo expansion, and sustainable managing the bamboo resources.

• Journal of the Korean Chemical Society
• /
• v.43 no.4
• /
• pp.461-468
• /
• 1999

Acetolactate synthase (ALS) catalyzes the first common reaction in the biosynthesis of branched-chain amino acids, valine, leucine, and isoleucine. ALS is the common target of several classes of structurally diverse herbicides, the triazolopyrimidines, the imidazolinones, the sulfonylureas, and pyrimidyl-oxy-benzoates. We examined ihibitory activities of newly synthesized triazolopyrimidine sulfonamide derivatives using partially purified ALS from barley. $IC_{50}$ values for the active derivatives are 0.5nM∼8$\mu$M. Among them TP1 and TP2 are the most potent ALS inhibitors with $IC_{50}$ values of 0.5nM and 1.6nM, respectively. These inhibitors are more potent in the inhibition of barley ALS than commercial herbicides, Metosulam ($IC_{50}$;3.6 nM), Flumetsulam ($IC_{50}$;126 nM), and Cadre ($IC_{50};4 {\mu}M$). The progress curves for inhibition of ALS by TP2 showed that the amount of inhibition increases with time. The inhibition of ALS by TP2 was mixed-type inhibition with respect to pyruvate. Dual inhibition analyses of TP2 versus an imidazolinone, Cadre, and Leu showed parallel and intercepting kinetic pattern, respectively. The results suggest that TP2 binds to ALS competively with Cadre but not with Leu. Chemical modification of cysteinly residues in ALS decreased the sensitivity of ALS to Leu, while the modification did not affect the sensitivity of ALS to TP2 and Cadre.

• Korean journal of food and cookery science
• /
• v.14 no.1
• /
• pp.1-8
• /
• 1998

The characteristics of Kimchi, associated with proceeding velocity of fermentation, and microbial changes, were investigated during fermentation where kimchi were prepared by the addition of different kinds of minor ingredients. In all samples, total acidity increased, and the pH and total reducing sugar content decreased as the fermentation proceeded. Redox potentials decreased from early to middle fermentation period but thereafter increased and had the lowest value at optimum ripening stage. The counts of total viable and lactic acid bacteria increased rapidly at the begining and decreased slowly. These bacterial counts of kimchi samples containing ginger, red pepper powder, and mixture of all minor ingredients were higher than those of other samples. The number of Leuconostoc mensenteroides reached the maximum at the optimum fermenting stage, Lactobacillus plantarum appeared at the time when Leu. mesenteroides reduced. All these phenomena were observed earlier in the samples containing raw red pepper and later in the samples added garlic than in other samples. It is suggested that garlic is the ingredient which improved storage capacity by prolonging fermentation period by lactic acid bacteria beneficial to less acidification, and ginger and red pepper powder are materials which gave better taste to kimchi by stimulating the growth of Leu. mesenteroids. And redox potential was an useful indicator in choosing optimum ripening time during fermentation.

• Journal of the Korean Chemical Society
• /
• v.30 no.4
• /
• pp.394-402
• /
• 1986

Detonation reaction in L.P.G./$O_2$ mixture gas has been investigated over the L.P.G. concentration range of 3∼45 volume%. The variation of detonation velocity with mixture ratio is very interesting as it shows and inflection point near at the stoichiometric ratio. This might be ascribed to the fact that the detonation reactions at fuel-rich condition and fuel-lean condition proceed via different mechanisms. The maximum detonation velocity of 2.65km/sec occurs not at stoichiometric ratio(${\phi}$=1) but at fuel-rich condition (${\phi}$=1.57). Assuming that a stable detonation wave must propagates with the constant velocity, The upper and lower limit of detonation were determined and found to be 40.0 and 3.40 L.P.G. volume% respectively. The shock-heating technique was also utilized for the measurement of self-ignition temperature onsetting a stable detonation wave at varous mixture ratios. The self-ignition temperature at stoichiometric ratio is $742{\pm}3{\circ}K$ and the self-ignition temperature increases as the mixture ratio deviates from the stoichiometric condition.

• Journal of Adhesion and Interface
• /
• v.2 no.4
• /
• pp.10-23
• /
• 2001

In order to increase the lower values of % grafting and monomer conversion in the emulsion graft polymerization of methylmethacrylate(MMA) onto sodium alginate (SA; a polymer electrolyte) with alginic acid-g-PMMA, the graft polymerization with water soluble (methanol and acetone) and insoluble solvents was carried out using a varity of solvent amounts and agitating rates. And some physical properties of the graft polymer were also investigated. In the polymerizations with water insoluble solvent, there were pronounced improvements in both % grafting and MMA conversion by the promotion of MMA diffusion from the core to the SA adsorpted on the outer layer of particle and that of MMA complex formation with SA. And the effect was larger for the solvents (cyclohexane, decalin) which do not dissolve PMMA. On the other hand, in the polymerization with water soluble solvent, there was an significant increase in MMA conversion and a considerable increase in the % grafting by the destruction of electrical double layer around the SA chains, abstracting the hydrated water in the layer and the effect was more potential in the case of methanol which is a precipitant of PMMA.

• Journal of radiological science and technology
• /
• v.33 no.3
• /
• pp.245-252
• /
• 2010

This study analyzed speed of sound, impedance, attenuation coefficient in accordance with acoustic characteristic standard of body soft tissue corresponding with Annex DD of IEC standard 60601-2-37(2007) which is about tissue mimicking materials (TMM) synthesized by polyurethane as a main material and new type of n-type scatter materials. This study reached the following conclusion after analyzing and evaluating image characteristic with SONOACE 9900 c PRIME (MEDESON Co.) and brightness, maximum penetration with convex probe (2.5~5.0 MHz). When n-type scatter materials are increasingly synthesised 0~8% with prepolymer as a main material and polyol mixture as a catalyst, 1. The more scatter materials are increased, the more sound speed of TMM becomes closely similar to soft tissue. 2. The more scatter materials are decreased, the more acoustic impedance becomes closely similar to soft tissue. 3. The more scatter materials are increased, the more attenuation coefficient is increased. 4. The more scatter materials are increased, the more average brightness of images is increased, but there is threshold. 5. The maximum penetration becomes closely similar to soft tissue at the 6% TMM as a scatter material.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.2
• /
• pp.115-122
• /
• 2010

In this study, the removal of Cs and Tc from a simulated fission products (FP) solution which were co-dissolved with U during the oxidative-dissolution of spent fuel in a mixed carbonate solution of $(Na_2CO_3-NaHCO_3)-H_2O_2$ was investigated by using a selective precipitation method. As Cs and Tc might cause an unstable behavior due to the high decay heat emission of Cs as well as the fast migration of Tc when disposed of underground, it is one of the important issues to removal them in views of the increase of disposal safety. The precipitation of Cs and Re (as a surrogate for Tc) was examined by introducing sodium tetraphenylborate (NaTPB) and tetraphenylphosponium chloride (TPPCl), respectively. Precipitation of Cs by NaTPB and that of Re by TPPCl were completed within 5 minutes. Their precipitation rates were not influenced so much by the temperature and stirring speed even if they were increased by up to $50^{\circ}C$ and 1,000 rpm. However, the pH of the solution was found to have a great influence on the precipitation with NaTPB and TPPCl. Since Mo tends to co-precipitate with Re at a lower pH, especially, it was effective that a selective precipitation of Re by TPPCl was carried out at pH of above 9 without co-precipitation of Mo and Re. Over 99% of Cs was precipitated when the ratio of [NaTPB]/[Cs]>1 and more than 99% of Re, likewise, was precipitated when the ratio of [TPPCl]/[Re]>1.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.412-418
• /
• 2020

This paper produced an automatic fluid management system that can accurately control the specific gravity of etching solution(FeCl₃), and produced a SUS MASK applied to OLED. The target was set at 0.4 mm in diameter of the hole. As a result of this misconception, the etching speed increased when the specific gravity(S.G) value of FeCl₃ was changed from 1.43 to 1.49. And when the weight was 1.49, it was found that the vertical diameter was 0.405 mm, approaching the target. When pressure injection was varied from 2.0kg/cm2 to 3.5kg/cm2, the hole diameter at 3.0 kg/cm2 averaged 0.4mm, matching the target. The characteristics of the change in gravity were analyzed by applying the additive 1.2% and setting the weight at 1.430 by mixing HCl and H2O in FeCl₃ and fixing the injection pressure at 3.0 kg/cm2. When the weight changed from 1.460 to 1.469 the etching speed increased from 0.564 to 0.540. When the weight was 1.467, the hole diameter was measured at 0.4 mm and the target was reached.

• Journal of the Korean Institute of Gas
• /
• v.21 no.3
• /
• pp.53-60
• /
• 2017

Various researches have been conducted for the reduction of NOx at the combustion furnace and exhaust gas recirculation method is commonly used technology for NOx reduction. The present research adopted coanda nozzles at the outside pipes of furnace to entrain the exhaust gas for the exhaust gas recirculation and the mixed gas was ejected to the tangential direction to cause the swirl flow in the furnace. The combustion flow characteristics in the exhaust gas recirculation burner with coanda nozzle has been elucidated by analyzing the swirl flow streamlines, temepraure and reaction rate distribution in the furnace. The exhaust gas entrained flow rate has been investigated by changing the excess air factor and coanda nozzle gap and the exhaust gas entrained flow rate increased with the increase of excess air factor and it decreased with the increase of coanda nozzle gap. The mean temperature at the exit plane of exhaust gas decreased with the excess air factor and it was little affected by the increase of coanda nozzle gap. The NOx mass fraction at the exhaust gas exit plane remarkably decreased with the excess air factor and it was also little affected by the increase of coanda nozzle gap.