• Food Science of Animal Resources
• /
• v.31 no.2
• /
• pp.273-279
• /
• 2011

Various honeys from different sources were analyzed using an electronic nose based on a mass spectrometer. Various honeys were separated with different mixing ratios. Wild honey and artificial honey were blended at ratios of 100:0, 95:5, 90:10, 85:15, 80:20, 75:25, and 70:30, respectively. Data obtained from the electronic nose were used for discriminant function analysis (DFA). The DFA plot indicated a significant separation of honey from different sources. As the concentration of artificial honey increased, the first discriminant function score (DF1) moved from positive to negative (DF1: $r^2$=0.9962, F=490.6; DF2: $r^2$=0.9128, F=19.44). Furthermore, when acacia honey was mixed with artificial honey and separated with the mixing ratios, the DF scores were: DF1: $r^2$=0.9957, F=396.64; DF2: $r^2$=0.9447, F=29.3. When artificial honey was added to wild honey, it was possible to predict the following equation; DF1= -0.106${\times}$(concentration of artificial honey)+0.426 ($r^2$= 0.96). For acacia honey, the DF1= -0.112${\times}$(concentration of artificial honey)+0.434 ($r^2$=0.968).

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.1
• /
• pp.67-72
• /
• 2004

Wood/polyethylene panels were manufactured from Populus alba × glandulosa particles and low density polyethylene particles at three mixing rates, 50:50, 60:40, and 70:30. A total of 15 wood/polyethylene panels was made at 145℃ and 5 minutes hot-press time. Wood/polyethylene panels were tested for internal bond, bending, and dimensional stabilities such as thickness swell and water absorption. Panel performance data were analyzed using the SAS programing package. The test results of the wood/polyethylene panels showed that as the polyethylene mixing rates were increased, the panel property values increased. Based on panels' dimensional stabilities, the optimum wood/polyethylene mixing ratio appeared to be 60:40.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.380-386
• /
• 2019

In this paper, in order to compare the mixing ratio according to the feeding method, the input error of the main material and the sub material was measured and analyzed for 100 cycles using raw material having the same viscosity. As a result of the piston pump method, the input error of main material and sub material varied greatly from 0g to 3g, and the maximum error ratio was 10.3%. In the dual-screw rotation method, the input error varied from 0.01g to 0,4g, and the maximum error ratio was 0.41%, and almost no input error occurred. As the process cycle increased, it was found that the feed was almost uniform. The dual-screw rotary two-component mixing system was used to measure and analyze the inputs of the main and sub materials for 100 using three types of liquid silicones with different viscosities of the raw materials. As a result, the average error was 0.75g and the error rate was less than 1% regardless of the viscosity of the applied raw materials. When rae materials having the same viscosity were used, the average error ratio of the piston pump method was 4.09%.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.6
• /
• pp.47-55
• /
• 2010

The recycled fine aggregates were mixed with weathered granite soils typically used for fill materials and tested engineering properties, physical properties, and compaction characteristics according to the mixing ratio of the mixed soils. The results of this study were as follows. For the results of A-type compaction test, the recycled fine aggregates showed low effects compared to the weathered soils, but the mixed soils which were mixed with the weathered granite soils and the recycled fine aggregates showed good compaction effects. Especially, the mixing ratio of 70:30 by weight showed for maximum compaction result. From the results of the direct shear test, the cohesion was ince csed according to proportion of the weathered granite soils. The weathered granite soils neared the optimum moisture content showed for maximum shear strength paramcoers, while the cohesion of the mixed soil was relatively ince csed in the wet side of the optimum moisture content. This trend was seemed to remained cence composition in the recycled fine aggregates. The internal friction angle of the recycled fine aggregates and the mixed soils showed maximum value near dry side of the optimum moisture contents. And the internal friction angles of the mixed soils were increased according to higher proportion of the recycled fine aggregates.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.87-87
• /
• 2018

다이아몬드 상 탄소(diamond-like carbon, DLC)는 상당량의 $sp^3$ 결합을 가지는 비정질 탄소(a-C) 또는 수소화 비정질 탄소(a-C:H)로 이루어진 준안정 형태의 탄소이다. DLC는 전기 저항과 굴절률이 높고 화학적으로 다른 물질과 반응하지 않으며, 마찰계수가 낮고 경도가 높아 자기 디스크, 광학 소자 등의 다양한 분야에서 적용되고 있다[1,2]. 또한 다이아몬드에 비해 상온에서 성장이 가능할 정도로 합성온도가 낮아 적용 기판의 제한이 거의 없고, 증착 방법과 조건에 따라 탄소 결합의 다양성과 비정질성이 변화하기 때문에 넓은 범위의 특성을 얻을 수 있는 장점이 있다. 지금까지 DLC 박막의 광학적 특성, 특히 굴절률, 광학적인 에너지 밴드 갭, 자외선과 적외선 투과성에 대해서는 많은 연구가 진행되었으나 가시광선의 투과성에 대한 연구는 제한적이며[4], 가시광선 투과도 개선에 대한 연구는 전무하다. 본 연구에서는 ITO 기판 위에 DLC를 합성하고 기계적 특성과 가시광선 영역 투과도를 조사하였다. RF-PECVD(radio frequency plasma enhanced chemical vapor deposition) 방법에 의해서 $C_2H_2+Ar$ 혼합 가스 비율과 $C_2H_2+N_2$ 혼합 가스 비율을 변화시켜 ITO 기판 위에 DLC 박막을 합성하였다. 공정 압력과 rf-power, 증착시간, 기판온도는 0.2 torr, 40 W, 5 분, $50^{\circ}C$로 고정하고, 공정 가스는 $C_2H_2+Ar$과 $C_2H_2+N_2$가 200 sccm이 되도록 비율을 변화하였다. $C_2H_2:Ar$과 $C_2H_2:N_2$의 비율은 180 : 20, 160 : 40, 140 : 60, 120 : 80, 100 : 100이 되도록 가스의 유량을 조절하였다. 투과도는 가시광선(380 ~ 780 nm) 범위에서 측정하였고 두께와 표면조도는 AFM으로 측정하였다. 투과도는 $C_2H_2+Ar$의 Ar 가스 비율이 증가할수록 증가해 140 : 60일 때 최댓값을 나타낸 후 다시 감소하였다. $C_2H_2+N_2$ 투과도는 $N_2$ 가스 비율이 증가할수록 감소하는 경향을 나타내었다. 표면 거칠기는 $C_2H_2+Ar$ 혼합 가스를 사용한 경우의 Ar의 가스 비율이 증가할수록 증가하였다. 그러나 $C_2H_2+N_2$ 혼합 가스를 사용한 경우에는 $N_2$ 가스의 혼합 비율이 증가할수록 감소하였다.

• Korean Journal of Food Science and Technology
• /
• v.36 no.2
• /
• pp.276-282
• /
• 2004

Barley flakes were developed by extrusion cooking using broken kernels, by-products of the barley pearling process. Broken kernels from both non-waxy and waxy barley broken kernels were sufficiently gelatinized at the barrel temperature of over $100^{\circ}C$ and the moisture content of broken kernels of over 35%. Cutting and flaking roll separating properties of pellets prepared from non-waxy barley broken kernels were better than those of waxy barley broken kernels. Characteristics of pellets prepared by extrusion cooking in different mixing ratios of non-waxy and waxy barley broken kernels were investigated. As the mixing ratio of waxy barley broken kernels increased, RVA peak viscosity, apparent viscosity, and yield stress of prepared pellets decreased, while flow behavior index increased. As the mixing ratio of waxy barley broken kernels increased, compressive strength and bulk density of deep-fat fried flakes drastically decreased, and the size of air cells on cross-section increased, and thickness of cell-constituting bodies decreased. Sensory evaluation results showed that acceptability for texture and taste of flakes inclosed as the mixing ratio of waxy barley broken kernels increased, and optimum mixing level of waxy barley broken kernels appeared to be 30-40%.

• Korean Journal Plant Pathology
• /
• v.3 no.4
• /
• pp.245-251
• /
• 1987

Soybean cultivars were inoculated with mixtures of races 3 and 4 of the soybean cyst nematode(SCN), Heterodera glycines Ichinohe. On a susceptible soybean cultivar Lee, the relative female maturation of the race mixture was not significantly different when compared with the maturation potentials for each of the two races alone. However, female maturation was significantly lower for the mixture than' for race 4 alone on the soybean cultivas Pickett and Mack which are susceptible to only race 4. Selection of SCN populations consisting of race 3 and race 4 resulted in a decrease in race 4 on soybean cultivars Lee and Bragg which are susceptible to all SCN races and an increase in race 4 on soybean cultivars Pickett and Peking which are susceptible to only race 4. A significant reduction of race 4 was also observed on Lee with most mixtures of race' 3 and race' 4 combined in several ratios, suggesting that race 3 was more competitive than race 4 on the susceptible soybean.

• Korea Petroleum Association Journal
• /
• no.5 s.254
• /
• pp.30-35
• /
• 2006

정유사들이 오는 7월부터 2년 동안 바이오디젤을 자발적으로 구매해 경유에 혼합 공급한다. 바이오디젤이란 콩이나 유채, 팜 등에서 추출한 식물성 유지나 폐식용유 등을 원료로 생산한 경우 대체연료로 정부가 지난 2002년부터 시범보급사업이 진행중이다. 그간의 시범보급사업에서 정부는 바이오디젤을 경유에 2:8로 혼합한 BD20 형태를 유지했지만 올해부터는 사정이 달라졌다. 주유소에서 판매가 허용되던 BD20 형태를 유지했지만 올해부터는 사정이 달라졌다. 주유소에서 판매가 허용되던 BD20은 7월 이후 자가 정비시설 등을 갖춘 연료 자가소비처로 유통을 한정하고 그 대신 모든 경유에 5% 이하의 바이오디젤을 혼합, 공급하는 'BD5' 방식을 선택했다. 하지만 'BD5'가 의무적인 것은 아니다. 현재 경유의 법정 품질기준에는 바이오디젤을 지칭하는 '지방산메틸에스테르 함량이 5% 이하까지 혼합할 수 있도록 하는 'BD5'기준이 설정되어 있지만 최저 혼합비율을 설정하지 않아 정유사 마음먹기에 따라서 전혀 혼합하지 않아도 된다. 혼합 가능한 상한선만 정해 있을 뿐 하한선은 없기 때문이다. 이와 관련해 정부는 2008년 월 이후부터 법으로 최저 혼합비율을 명시해 정유사들이 의무적으로 바이오디젤을 섞어 판매할 수 있도록 하겠다는 복안이다. 이에 앞서 정유사들은 지난 3월 산업자원부와 협약을 맺고 올해 7월부터 2008년 6월까지 2년동안 바이오디젤을 자발적으로 구매해 경유에 혼합 공급하겠다고 선언했다. 구매 물량은 연간 9만톤 수준으로 정부가 의도중인 2008년 7월 이후의 본 보급에 앞선 사실상의 마지막 실험 무대가 될 수 있다는 측면에서 중요한 의미를 갖게 된다. 바이오디젤이 대중적으로 보급되기 위해서 필수적으로 갖춰야 하는 원료의 안정적인 수급이나 품질의 안정성, 가격경쟁력 등이 향후 2년간의 과정에서 충분히 검증돼야만 본 보급에 착수할 수 있기 때문이다. 이처럼 중요한 시점에서 바이오디젤시장이 안고 있는 문제점을 점검해 보고자 한다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.5
• /
• pp.201-206
• /
• 2018

This study investigated the changes in pore water quality of polluted sediment by mixing ratio of granulated coal ash. The mesocosm experiments were carried out with 0%, 10%, 30% and 50%, respectively, of the material mixture ratio relative to the sediments. According to the results of the experiments, pH increased depending on the mixing ratio. Phosphate and ammonia concentrations were significantly decreased in the mixing ratio of 30% and 50% compared to the control (p < 0.05). The concentration of hydrogen sulfide was reduced by 72% at the mixing ratio of 10%, and it was not detected at the mixing ratio of 30% and 50%. This study was confirmed that granulated coal ash can change the pore water quality of polluted sediments in proportion to the amount of material. However, the effect of the mixing ratio between 30% and 50% was not significantly different, thus it is concluded that mixing of 30% of the volume of the sediment is economically feasible.

• Korean Journal of Organic Agriculture
• /
• v.7 no.2
• /
• pp.179-188
• /
• 1999

The effects of earthworm casts as a plant growth media on the growth of orchardgrass seedlings and the changes of physico-chemical properties in worm casts mixture soils were investigated during the growth period of 1998. Worm casts were mixtured with vermiculite, perlite and peat moss, and mixture ratios of worm casts with commercial recommended soil were 100:0(control), 75:25, 50:50, 25:75, and 0:100, respectively. The results were obtained as follows; 1. Plant length(PL) was increased in higher mixture ratios of worm casts and peat moss than those of other mixture ratios of commercial recommended soils. 2. Number of tillers(NT) were significantly increased in mixture ratios of worm casts and peat moss(50:50) and 100% of vermiculite. 3. Root length(RL) was significantly differences between mixture ratios at the worm casts, and the highest value was obtained at all mixture ratios of worm casts and perlite. 4. Dry weight of leaf(LW) was not significantly differences at mixture ratios of 50:50 in all treatments. Especially, between the mixture ratios of worm casts with peatmoss(25:75) and peat moss(75:25) were not significantly differences in dry weight of leaf(LW). The highest value of dry weight of leaf(LW) was obtained at mixture ratios of peat moss and worm casts. 5. Dry weight of tillers(SW) was not significantly differences at mixture ratios of 50:50 in all treatments, and peat moss(75:25) and vermiculite(75:25), respectively. 6. biological yield(BY) at all treatments were increased by yield components of dry weight of tillers(SW), dry weight of root(RW) and length of root(RL). 7. The biological yield of orchardgrass seedlings was greatly increased with mixture ratios of worm casts and peat moss over the 50%.