• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.05a
• /
• pp.273-276
• /
• 2009

본 연구는 Knife형 전극을 사용하여 이종절연재하의 갭 변화에 따른 연면방전 특성을 연구할 목적으로 교류고전압 인가 시 압력(P), 전극간거리(d) 및 사용된 가스의 변화에 따른 절연파괴특성을 연구하였다. 본 연구를 통해 챔버 내의 P와 d가 증가할수록 $SF_6$, I-Air, Dry-Air 및 순수 $N_2$는 파센의 법칙에 일치하여 절연파괴특성이 비례 증가하는 것을 확인했다. 그리고 $N_2:O_2$혼합가스 중 특정 비율에서는 P에 대해선 비선형적으로, d에 대해선 선형적으로 증가함을 확인했다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.883-889
• /
• 2013

The distribution of a response usually depends on the distribution of a variable. When the distribution of a variable has two different modes, the response also follows a distribution with two different modes. In most reliability analysis methods, the number of modes is irrelevant, but not the type of distribution. However, in actual problems, because information is often provided with two or more modes, it is important to estimate the distributions with two or more modes. Recently, some reliability analysis methods have been suggested for bimodal distributions. In this paper, we review some methods such as the Akaike information criterion (AIC) and maximum entropy principle (MEP) and compare them with the Monte Carlo simulation (MCS) using mathematical examples with two different modes.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.141-141
• /
• 2018

자연하천에 존재하는 식생은 동식물에게 주거지를 제공할 뿐만 아니라 영양염류 흡착 및 정화작용을 통해 수질을 개선시키는 역할을 한다. 이러한 식생하천에 오염물질이 유입될 경우 식생에 의한 흐름 교란 작용으로 인해 오염물의 확산거동에 큰 영향을 주게 된다. 본 연구에서는 식생하천에서의 오염물질 혼합특성을 분석하기 위해 식생모형 실험을 수행하였고, Fischer et al (1979)이 제시한 이론식을 실험결과에 적용하여 종분산계수를 산정하고자 한다. 본 연구에서는 자연하천을 재현하기 위해 실험수로에 수중식생 모형을 설치한 후 ADV-Vectrino유속계를 이용하여 유속을 측정하였으며 실험을 통해 식생흐름에서의 유속분포 자료를 취득하고 이를 바탕으로 종분산계수를 산정하였다. 먼저 수중 식생흐름에서 연직유속분포를 측정한 결과, 식생이 존재하는 바닥근처에서는 유속이 느리다가 비식생 구간으로 가면서 유속이 증가하는 분포를 나타낸다. 또한 이 설치된 테스트 구간에 밀도와 유량변화에 따른 케이스를 적용하여 비교 및 분석을 한 결과 식생 밀도를 고정시키고 유량을 증가 시켰을 때 식생구간과 식생이 없는 구간에서의 유속도 증가하는 경향을 보였으며, 유량을 고정시키고 식생의 밀도를 순차적으로 높였을 경우 식생구간에서의 유속이 점차적으로 줄어드는 경향을 보였다. 다음으로 분산계수를 결정하는 방법에는 농도자료를 이용하는 방법과 유속자료를 이용하는 방법이 있는데 본 연구에서는 유속자료를 Fischer et al. (1979)의 이론식에 적용하여 분산계수를 산정하는 방법을 적용하였다. Fischer et al. (1979)가 제시한 식에서 먼저 전단 유속 값을 산정하기 위해 벽법칙 (Karman, 1930), 레이놀즈 전단응력 그리고, 난류운동에너지 (Graf, 1998) 방법을 사용한 후 복잡한 난류 흐름에 적용하기 가장 적합하다는 난류운동에너지 방법을 적용하여 전단 응력이 가장 크게 나온 식생모델 끝단에서의 값을 사용하였다. 그 결과, 수중 식생이 존재하는 흐름에서 무차원화 시킨 종분산계수는 6.89-9.78로 나타났다, 이는 Elder (1959)의 수심 적분을 통해 제시한 종분산계수 값 5.93보다 크다. 즉, 수중 식생이 존재할 경우 종분산계수는 식생이 존재 하지 않을 때 보다 증가하는 것으로 보여 진다.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.3
• /
• pp.367-379
• /
• 1994

This paper describes scheduling algorithms of the UNIX operating system and shows an analytical approach to approximate the average conditional response time for a process in the UNIX operating system. The average conditional response time is the average time between the submittal of a process requiring a certain amount of the CPU time and the completion of the process. The process scheduling algorithms in thr UNIX system are based on the priority service disciplines. That is, the behavior of a process is governed by the UNIX process schuduling algorithms that (ⅰ) the time-shared computer usage is obtained by allotting each request a quantum until it completes its required CPU time, (ⅱ) the nonpreemptive switching in system mode and the preemptive switching in user mode are applied to determine the quantum, (ⅲ) the first-come-first-serve discipline is applied within the same priority level, and (ⅳ) after completing an allotted quantum the process is placed at the end of either the runnable queue corresponding to its priority or the disk queue where it sleeps. These process scheduling algorithms create the round-robin effect in user mode. Using the round-robin effect and the preemptive switching, we approximate a process delay in user mode. Using the nonpreemptive switching, we approximate a process delay in system mode. We also consider a process delay due to the disk input and output operations. The average conditional response time is then obtained by approximating the total process delay. The results show an excellent response time for the processes requiring system time at the expense of the processes requiring user time.

• Korean Journal of Materials Research
• /
• v.10 no.7
• /
• pp.471-477
• /
• 2000

Corrosion behavior of Fe-Ni-Cr alloy in molten salts of LiCl and LiCl-$Li_2O was investigated in the tempera-ture range of $650~850^{\circ}C$. In the molten salt of LiCl, and internal oxidation of Fe occurred in the KSA(Kaeri Superalloy)-1 alloy without containing Cr, while a dense protective oxide scale of $LiCrO_2$ was formed in the KSA-4, Incoloy 800H and KSA-5 alloys. In the mixed molten salt of LiCl-$Li_2O$, internal oxidation of Fe and Cr took place in the KSA-1 and KSA-4 alloys, respectively. Non-protective porous oxide scales consisting of $LiCrO_2$ and Ni were formed in the Incoloy 800H and KSA-5. The corrosion rate of the alloys increased with the increase in Cr content and the corrosion rate followed the parabolic law for the alloy containing Cr content less than 8%, and the linear law for the alloy containing Cr content more than 8%. Such a corrosion behavior of the alloy in the mixed molten salt of LiCl-$Li_2O$ was interpreted in terms of the basic fluxing mechanism of protective oxide scale of $Cr_2O_3$.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.04a
• /
• pp.41-41
• /
• 2013

화학산업이 발달함에 따라 화학 산업 현장에서 사용되고 있는 가연성물질들의 여러 가지 화재 및 폭발 위험이 증가되고 있으며, 화재 및 폭발의 예방 안전을 위한 화학공정설계 및 대처에 있어, 물질의 연소특성치 데이터를 필요로 한다. 인화점은 가연성 액체를 다루는 공정에서 안전한 취급과 사고방지를 위해 중요한 자료가 되며, 화재의 위험을 나타내는 지표로서 가연성액체의 액면 가까이서 인화할 때 필요한 증기를 발산하는 액체의 최저온도, 그리고 가연성증기의 포화증기압이 공기와 혼합기체의 폭발한계 하한농도와 같게 되는 온도로 정의한다. 본 연구에서는 2성분계 혼합물에 대해 인화점을 측정하였고, 측정값을 Raoult의 법칙과 다중회귀분석(Multiple Regression)을 도입하여 이론값과 비교 하였다. 따라서 본 연구에서 제시된 방법론에 의해 아직까지 밝혀지지 않은 순수가연성액체와 가연성혼합물의 인화점을 예측하는 방법을 전개하고자 하며, 실험에서 찾고자하는 자료에 도움을 주고자 한다. 본 연구를 바탕으로 혼합물의 인화점 예측 방법과 실험에서 측정한 자료를 화재 및 폭발을 방지하는 기초 자료로 제공하고자하며, 산업현장에서 취급되고 있고 위험성 평가가 되지 않은 보다 많은 물질에 대한 이론 및 실험 연구에 활용 되도록 하는데 그 목적이 있다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.911-916
• /
• 2016

The nearest-neighbor multihop routing with/without infrastructure support is known to achieve the optimal capacity scaling in a large packet-erasure network in which multiple wireless nodes and relay stations are regularly placed and packets are erased with a certain probability. In this paper, a throughput scaling law is shown for an infrastructure-supported erasure network where wireless nodes are randomly distributed, which is a more feasible scenario. We use an exponential decay model to suitably model an erasure probability. To achieve high throughput in hybrid random erasure networks, the multihop routing via highway using the percolation theory is proposed and the corresponding throughput scaling is derived. As a main result, the proposed percolation highway based routing scheme achieves the same throughput scaling as the nearest-neighbor multihop case in hybrid regular erasure networks. That is, it is shown that no performance loss occurs even when nodes are randomly distributed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.3
• /
• pp.223-233
• /
• 2011

A ceramic monolithic catalyst is a honeycomb structure that consists of two layers. The honeycomb structure is regarded as a continuum in structure and heat-flow analysis. The equivalent mechanical properties of the honeycomb structure were determined by performing finite element analysis (FEA) for a test specimen. Bending strength experiments and FEA of the test specimen used in ASTM C1674-08 standard test were performed individually. The bonding coefficient between the cordierite ceramic layer and the washcoat layer was almost zero. The FEA test specimen was modeled on the basis of the bonding coefficient. The elastic modulus, Poisson's ratio, and the thermal properties of the ceramic monolithic substrate were determined by performing the FEA of the test specimen.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.5
• /
• pp.421-426
• /
• 2017

In this study, we propose a method for predicting the mechanical properties of the printed circuit board (PCB) that has transversely isotropic characteristics. Unlike the isotropic material, there is no specific test standard for acquisition of the transversely isotropic properties. In addition, common material test methods are not readily applicable to that type of laminated thin plate. Utilizing the natural frequency obtained by a modal test and the sizing optimization technique provided in $OptiStruct^{(R)}$, the mechanical properties of a PCB were derived to minimize the difference between test and analysis results. In addition, the validity of the predicted mechanical properties was confirmed by the MAC (Modal Assurance Criteria) value of each of the compared mode shapes. This proposed approach is expected to be extended to the structural analysis for the design verification of the top product that includes a PCB.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.1
• /
• pp.105-111
• /
• 2002

A post-tensioned slab bridge is analyzed by the specially orthotropic laminates theory. Both the geometry and the material of the cross section of the slab are considered symmetrical with respect to the mid-surface so that the bending extension coupling stiffness, $B_{ij}=0$, and $D_{16}=D_{26}=0$. Each longitudinal and transverse steel layer is regarded as a lamina, and material constants of each lamina is calculated by the use of rule of mixture. This bridge with simple support is under uniformly distributed vertical and axial loads. In this paper, the finite difference method and the beam theory are used for analysis. The result of beam analysis is modified to obtain the solution of the plate analysis. The result of this paper can be used for post-tensioned slab bridge analysis by the engineers with undergraduate study in near future.