• Title/Summary/Keyword: 혼합면

Search Result 914, Processing Time 0.031 seconds

The Effect of Hydrocarbon Content and Temperature Distribution on The Morphology of Diamond Film Synthesized by Combustion Flame Method (연소 화염법에 의해 합성된 다이아몬드형상에 미치는 탄화수소량과 온도분포의 영향)

  • Kim, Seong-Yeong;Go, Myeong-Wan;Lee, Jae-Seong
    • Korean Journal of Materials Research
    • /
    • v.4 no.5
    • /
    • pp.566-573
    • /
    • 1994
  • The diamond synthesis by combustion flame method is considerably affected by the substrate surface temperature and its distribution which are mainly controlled by the ratio of mixed gas, $O_2/C_2H_2$. In order to elucidate the role of gas ratio in the diamond synthetic process by combustion flame, under various gas ratios (R=0.87~0.98; R=ratio of flow-rate of $O_2/C_2H_2$ gas) the substrate temperature was measured by using thermal video system and the morphological change of diamond crystals was analysed by using SEM, Raman spectroscope, and X-ray diffraction method. With increasing the gas ratio, i.e., decreasing the hydrocarbon content, the nucleation rate of diamond crystal was lowerd. It was also found that the morphology of diamond crystals changed from the cubo-octahedron type consisting of (100), (111) plane to the octahedron type of (111) plane. The increase of the substrate temperature consistently resulted in the increase of the nucleation rate as well as the growth rate of diamond crystals in which the surface of diamond crystal dominantly consisting of (100) plane.

  • PDF

Cross-sectional Radiation Type Mixer into the Boundary Surface using PMN-PT for Micromixing (마이크로믹서에의 응용을 위해 PMN-PT를 이용한 경계면과 수직방향 방사형 믹서)

  • Heo Pil Woo;Yoon Eui Soo;Kho Kwang Sik
    • Journal of the Institute of Electronics Engineers of Korea SC
    • /
    • v.42 no.1
    • /
    • pp.33-37
    • /
    • 2005
  • A micromixer plays an important role in Bio-MEMS or μ-TAS. Mixing is generally generated by turbulence and interdiffusion of two fluids. Because of low Reynolds number values (Re << 2000) within microchannels, it is difficult to generate turbulence, and consequently mixing mainly depends on interdiffusion. So, channel distance is often prohibitively long to mix two different fluids properly. To reduce this mixing length, we proposed a new mixer for micromixing in which two fluids were effectively mixed by an ultrasonic wave generated by PMN-PT. The ultrasonic wave was radiated into a chamber In the cross-sectional direction into the boundary surface formed by two fluids. The two fluids were positioned one on top of the other. The mixing state was measured by observing the color of samples due to the reaction of NaOH and phenolphthalein.

Flexural Experiment of PSC-Steel Mixed Girders and Evaluation for Analyses on Tangentional Stiffness of Connection (프리스트레스트 콘크리트-강 혼합거더의 휨 실험 및 경계면 수평계수 분석)

  • Kim, Kwang-Soo;Jung, Kwang-Hoe;Sim, Chung-Wook;Yoo, Sung-Won
    • Journal of the Korea Concrete Institute
    • /
    • v.20 no.2
    • /
    • pp.231-237
    • /
    • 2008
  • This study was performed to evaluate joint behavior of prestressed concrete(PSC)-steel mixed girders through the flexural test of 14 beams according to embedded length, amount of reinforcing steel, stud arrangement, and prestressing force. All test beams were failed by turns of desertion of reinforcing steel, stud, and steel plate. From test results, prestressing force was more effective on performance of connection than stud arrangement and reinforcing steel. And the spacing of stud is also more effective than embedding length. This paper also presented 3D nonlinear analysis considering the slip of composite section as well as the static load tests of PSC-steel mixed girders. According to the slip modulus, the nonlinear analysis showed that the behavior of hybrid girders could be divided into three parts as full-composite, partial-composite and non-composite. However, the experimental results showed that the PSC-steel hybrid girders with shear connectors took the part of partial composite action in ultimate load stage. In addition, it was founded that stud shear connectors and welded reinforcements were contributed to improve the ultimate strength of hybrid girders for about 20%.

A Study on Analysis of Freshwater-saltwater Interface in the Aquifer around Hwajinpo Lagoon on the Eastern Coast of Korea (동해안 화진포 석호 주변 대수층 내 담수-염수 경계면 분석에 관한 연구)

  • Kim, Minji;Kim, Dongjin;Jun, Seong-Chun;Lee, Jeonghoon
    • Economic and Environmental Geology
    • /
    • v.54 no.6
    • /
    • pp.699-707
    • /
    • 2021
  • Hwajinpo Lagoon, located on the eastern coast of Korea, is a unique environment where freshwater and saltwater are mixed. Systematic management of the lagoon is required because it is a biodiversity-rich and area of high conservation value. The existing environment of the lagoon was evaluated by identifying the distribution of the groundwater level and groundwater flow characteristics. In addition, hydrogeochemical fluctuations were analyzed to determine the effect of seawater intrusion into the aquifer. The results demonstrate that the freshwater-saltwater interface is distributed throughout the aquifer and rises when water of the lagoon evaporates due to prolonged periods of low rainfall and high temperature, thereby increasing the possibility of seawater inflow through groundwater. As for the ionic delta properties (difference between the measured and theoretical concentration of mixed waters), it was estimated that the cation-exchange and precipitation reactions occurred in the aquifer due to seawater intrusion. The ratio of seawater mixed at each point was calculated, using oxygen isotopes and chloride as tracers, resulting in an average of 0.3 and a maximum of 0.87. The overall seawater mixing ratio appears to be distributed according to the distance from the coast. However, some of the results were deviated from the theoretical expectations and reflected the characteristics of the nearby aquifers. Further research on seasonal changes and simulation of seawater intrusion mechanisms is required for specific analysis.

Effects of Barley Noodles Contained Mulberry Leave Extracts on Blood Glucose Regulation in Diabetic Mice (당뇨 쥐에서 상엽추출물을 첨가한 보리면의 혈당조절효과)

  • Park, Chung-Mu;Yoon, Hyun-Seo
    • Journal of the Korea Convergence Society
    • /
    • v.9 no.8
    • /
    • pp.101-108
    • /
    • 2018
  • This study aimed to investigate the blood glucose regulatory effect of barley noodles contained mulberry leaves water extract (MLWE) in diabetic mice in order to provide fundamental data as a functional food. ICR mice were divided into six groups as follows: normal control, positive control, barley control, mulberry control, barley+MLWE 2.5% and barley+MLWE 5% groups. High fat/high carbohydrate diet was fed for 4 weeks and diabetes mellitus was induced by i.p. injection of streptozotocin and nicotinamide. After diabetes induction, experimental diet was supplemented for 2 weeks and simultaneous measurement of body weight, blood glucose (including glucose tolerance test), liver function and blood lipid profile was conducted. As a result, there was less decrease in body weight compared to the positive control group in the groups that supplemented barley and MLWE together than the group ingesting barley and MLWE alone. In addition, regulatory effects on blood glucose, liver function and blood lipid concentration were also stronger in barley and MLWE concurrently supplemented groups. Consequently, combination of barley and MLWE was effective in the regulation of body weight, blood glucose, liver function, and blood lipid in diabetic mice. Therefore, this recipe could be a promising strategy for beneficial effects in the patients of diabetes mellitus.

Interface Capturing for Immiscible Two-phase Fluid Flows by THINC Method (THINC법을 이용한 비혼합 혼상류의 경계면 추적)

  • Lee, Kwang-Ho;Kim, Kyu-Han;Kim, Do-Sam
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.24 no.4
    • /
    • pp.277-286
    • /
    • 2012
  • In the numerical simulation of wave fields using a multi-phase flow model that considers simultaneous flows of materials with different states such as gas, liquid and solid, there is need of an accurate representation of the interface separating the fluids. We adopted an algebraic interface capturing method called tangent of hyperbola for interface-capturing(THINC) method for the capture of the free-surface in computations of multi-phase flow simulations instead of geometrical-type methods such a volume of fluid(VOF) method. The THINC method uses a hyperbolic tangent functions to represent the surface, and compute the numerical flux for the fluid fraction functions. One of the remarkable advantages of THINC method is its easy applicability to incorporate various numerical codes based on Navier-Stokes solver because it does not require the extra geometric reconstruction needed in most of VOF-type methods. Several tests were carried out in order to investigate the advection of interfaces and to verify the applicability of the THINC method to wave fields based on the one-field model for immiscible two-phase flows (TWOPM). The numerical results revealed that the THINC method is able to track the interface between air and water separating the fluids although its algorithm is fairly simple.

Verification of experimental test for PSC-Steel-PSC hybrid beam using nonlinear FEM analysis (비선형 FEM 해석을 이용한 PSC-Steel-PSC 혼합구조 보의 휨 실험 검증)

  • Kim, Sang-Hyo;Won, Jung-Hun;Park, Se-Jun;Lee, Chan-Gu
    • Proceedings of the Computational Structural Engineering Institute Conference
    • /
    • 2009.04a
    • /
    • pp.517-520
    • /
    • 2009
  • 본 연구에서는 비선형 FEM 해석을 이용하여 PSC(Prestressed concrete)와 강으로 구성된 혼합구조 보의 휨 실험을 검증하였다. 혼합구조 보의 거동에 가장 큰 영향을 미치는 연결부는 Perfobond rib로 구성된 경우와 스터드로 구성된 경우를 고려하였다. 이종 재료가 접하는 경계면의 상호 작용에 대해 완전합성과 부분합성인 경우를 고려하여 혼합구조 보의 비선형 해석을 수행한 후 해석 결과와 실험 결과를 비교하였다. 하중-처짐관계, 파괴 형상 등의 해석 결과를 실험 결과와 비교한 결과, 부분합성을 고려한 모형이 실험 결과와 유사한 거동을 보였으며 또한 Perfobond rib를 갖는 실험체가 스터드를 갖는 실험체보다 해석 결과와 비교 시 안전측의 결과를 나타냈다.

  • PDF

혼합증기(수증기/공기)와 물의 직접 접촉 응축 열전달 현상

  • 이한춘;김무환;박수기
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1998.05a
    • /
    • pp.577-583
    • /
    • 1998
  • 직접 접촉에 의한 응축 열전달은 혼합증기의 레이놀즈수, 비응축 가스(공기)의 질량비, 액막의 레이놀즈수, 그리고 액막의 과냉 정도에 따라 영향을 받게 된다. 이러한 변수들의 영향을 고찰하기 위하여 본 연구에서는 수평면으로부터 87˚ 기울어진 수직 사각 덕트에서 직접 접촉 응축 열전달 실험을 수행하였다. 위의 각 실험 변수에 따른 평균 열전달 대수의 변화를 고찰하였으며, 실험결과로부터 혼합증기 레이놀즈수, 비웅축 가스의 질량비, 액막 레이놀즈수, 그리고 제이콥수를 변수로 하여 직접 접촉 응축 열전달에 대한 평균 누셀트수에 대한 실험 상관식을 도출하였다. 혼합증기의 직접 접측 웅축 열전달에 대한 평균 열전달 계수는 비응축 가스의 질량비가 증가할수록 현저히 증가함을 보였으며, 액막의 과법 정도가 증가할수록 평균 열전달 계수는 감소하였다. 그리고 혼합증기의 레이놀즈수가 30,000 이상의 템위에서는 액막 레이놀즈수의 변화에 따라 평균 열전달 계수의 변화가 거의 없었다.

  • PDF