• Polymer(Korea)
• /
• v.30 no.5
• /
• pp.380-384
• /
• 2006

Polyhedral oligomeric silsesquioxanes (POSS) were used as starting materials for the preparation of hybrid materials with polystyrene (PS). Optically transparent hybrids were obtained in a wide range of weight ratios when phenyl groups were introduced to each corner of the silsesquioxane. In contrast, as cyclohexyl groups were introduced, the obtained hybrid materials with PS resulted in turbid films. The aromatic (${\pi}-{\pi}$) interaction was confirmed to be a quite effective tool for the synthesis of organic-Inorganic polymer hybrids with POSS. The obtained homogeneous and transparent hybrid films could be dissolved in solvents and East again without any separation. The homogeneity of polymer hybrids with POSS was supported by the result of scanning electron microscopy (SEM), X-ray diffraction (XRD), and differential scanning calorimetry (DSC), which demonstrated a nanometer-level integration of PS and POSS.

• Polymer(Korea)
• /
• v.38 no.3
• /
• pp.265-271
• /
• 2014

In order to investigate the characteristics of the gradient fluorinated polyacrylate and polyurethane latex blend films, the fluorinated polyacrylate emulsion and the polyurethane emulsion were synthesized, and then the both emulsions were blended at a series of ratios. The effects of content of the fluorinated polyacrylate on the gradient structure and surface property of the blended films were assessed by AFM, XPS, SEM-EDX and surface free energy measurements. It appeared that, while the content of the fluorinated polyacrylate latex was up to 30%, the fluorinated polyacrylate particles were selectively gathered on the film-air (F-A) and film-glass (F-G) interfaces at room temperature. When the content of the fluorinated polyacrylate was under 30%, the gradient structure of fluorinated component was not evident. The further increasing of fluorinated polyacrylate in the mixed system facilitated the formation and enlargement of gradient structure, but the adhesion of film decreased a little.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.3
• /
• pp.282-286
• /
• 2009

The synthesis and characterization of catalysts supported on multi-walled carbon nanotubes (CNTs). $Pt/Au/TiO_2$ is added to a CNTs(cabon nano tube) carbon support to improve the performance of a direct methanol fuel cell. XRD and SEM showed that uniform anatase $TiO_2$ and Pt/Au particles were about 200 nm and 20${\sim}$25 nm in diameter. The composite catalyst activities were measured by cyclic voltammetry (CV), demonstrating that it is more promising for use in fuel cells.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.12B
• /
• pp.2141-2153
• /
• 2000

본 논문에서는 DMT 기반의 xDSL 시스템의 수신단에서 발생하는 샘플링 위상 옵셋과 샘플링 주파수 옵셋에 의한 타이밍 오류를 분석한 후, 디지털 수신기에서 이를 보상하기 위한 비동기식 샘플링(full digital PLL) 방식을 제안한다. 기존의 논문에서는 DMT 방식의 xDSL 시스템에서 샘플링 위상 옵셋을 delay-rotor 특성을 이용한 주파수영역 위상 회전기로 보상하는 비동기식 샘플링 방식을 제안한 바 있다. 그러나 수신단에서 샘플링 시 존재하는 타이밍 오류로 인해 저역통과 필터링된 수신신호는 더 이상 delay-rotor 특성이 성립하지 않아 성능이 크게 저하된다. 본 논문에서는 샘플링 위상 옵셋을 완벽하게 보상할 수 있는 데이터 구간의 환형 컨벌루션화(circular convolution) 방식을 제안한다. 또한 샘플링 위상 옵셋과 샘플링 주파수 옵셋이 동시에 존재하는 경우 이를 보상할 수 있는 개선된 시간/주파수 혼성영역 보상방식을 제안한다. 또한 추가의 오버헤드를 사용하지 않고 샘플링 위상 옵셋과 샘플링 주파수 옵셋을 보상할 수 있는 시간영역 보상방식을 제안한다. 마지막으로 DMT 방식의 ADSL 시스템에 본 논문에서 제안된 비동기식 샘플링 방식들을 적용하여 모의실험을 통해 성능을 분석하고 기존의 방식과 비교하여 성능의 우수성을 확인한다.

• Applied Chemistry for Engineering
• /
• v.28 no.3
• /
• pp.290-293
• /
• 2017

In this study, the fundamental behavior of microdomains in block copolymer/nanoparticle composite thin films was examined. In this experiment, polystyrene-b-poly(2-vinylpyridine) block copolymer and CdSe nanoparticles having a noncentrosymmetric property were employed. Composite hybrid thin films were produced by a spin coating method, and changes in the internal structure of composite thin films were monitored mainly by transmission electron microscopy. In summary, nanoparticles resided inside the thin film relatively intact, however, the block copolymer microdomains rotated parallel to the electric field direction. This study will be very helpful for future research activities regarding behaviors of heterogeneous composite materials under external fields.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.3
• /
• pp.37-43
• /
• 2010

In this study, the multi format 8.4" LCD monitor for broadcasting has been proposed by the simple circuit design and the efficient processing technique. The small sizing technique, the mixed-type video signal processing technique, the emerging skill of multi-format HD signal to one port, the dividing technique between the analog and digital signal, the embedded audio signal developing technique are the key researches of this study. The proposed multi format 8.4" LCD monitor has been focused on the broadcasting field and has been supposed to have the efficiency at that field.

• Korean Journal of Microbiology
• /
• v.33 no.2
• /
• pp.118-124
• /
• 1997

In the previous study(6), we constructed the CheY-OmpR hybrid, Chp, which affects the expressions of ompF and om pC genes. Here we further characterize these effects and present the regulatory mechanism based on in vivo and in vitro data. Although Chp retained the sequence-specific DNA-binding ability, it was not possible to enhance transcriptional activity, suggesting that it may act as a competitive inhibitor to OmpR. The DNA-binding affinity of Chp was not modulated by phosphorylation of its Che Y portion. Chp was able to increase ompR transcription. FurthemlOre, it was found that the wild-type OmpR also exerts the same effect, which is also eOlltrolled by changes in medium osmolarity and in EnvZ activity.

• Horticultural Science & Technology
• /
• v.32 no.1
• /
• pp.91-99
• /
• 2014

The objective of this study is to identify cold-tolerance genes in Brassica rapa. In order to acheive this goal, we analyzed a KBGP-24K oligo chip data [BrEMD (B. rapa EST and Microarray Database)] using B. rapa ssp. pekinensis inbred line 'Chiifu' under cold stress condition ($4^{\circ}C$). Among 23,929 unigenes of B. rapa, 417 genes (1.7%) were primarily identified as cold responsive genes that were expressed over 5-fold higher than those of wild type control, and then a gene which has unknown function and has full length sequence was selected. It was named BrCSR (B. rapa Cold Stress Resistance). BrCSR was transformed using expression vector pSL101 to confirm whether BrCSR can enhance cold tolerance in tobacco plants. $T_1$ transgenic tobacco plants expressing BrCSR were selected by PCR and Southern hybridization analyses, and the function of BrCSR was characterized by expression level analysis and phenotype observation under cold stress condition. The expression level of BrCSR in transgenic tobacco plants increased up to about two folds in quantitative real-time RT-PCR assay and this was very similar to Northern blot hybridization analysis. Analysis of phenotypic characteristics clearly elucidated that transgenic tobaccos expressing BrCSR were more cold tolerant than wild type control under $4^{\circ}C$ treatment. Based on these results, we conclude that the over-expression of BrCSR might be closely related to the enhancement of cold tolerance.

• Membrane Journal
• /
• v.23 no.4
• /
• pp.267-277
• /
• 2013

The effect of water back-flushing period (FT) and water back-flushing time (BT) was compared with the previous study of nitrogen back-flushing in viewpoints of resistance of membrane fouling ($R_f$), permeate flux (J), and total permeate volume ($V_T$) in hybrid process of tubular ceramic microfiltration and PES (polyethersulfone) beads loaded $TiO_2$ photocatalyst for advanced drinking water treatment. As FT decreasing, Rf decreased, but J and $V_T$ increased. Turdity treatment efficiency was the maximum at NBF (no back-flushing) and increased a little as FT decreasing in both water and nitrogen back-flushing. Organic matter treatment efficiency was the maximum at FT 4 min in water back-flushing, but increased as FT decreasing in nitrogen back-flushing. As BT increasing, Rf and resistance of reversible membrane fouling ($R_{rf}$) decreased, but J and $V_T$ increased. The turdity treatment efficiency was almost constant beyond 98% in water back-flushing, but increased as BT increasing except NBF in nitrogen. The organic matter treatment efficiency was the maximum at BT 6 sec in water back-flushing, but increased as BT increasing except NBF in nitrogen. The $V_T$ was the maximum at BT 30 and FT 2 min, and optimal condition was BT 30 sec per FT 2 min in this experimental range.

• Membrane Journal
• /
• v.24 no.2
• /
• pp.123-135
• /
• 2014

The effects of pH, saturated oxygen, and back-flushing media were investigated in hybrid process of tubular ceramic microfiltration and $TiO_2$ photocatalyst-loaded PES (polyethersulfone) beads for advanced drinking water treatment, and compared results of water, nitrogen, or oxygen back-flushing in the viewpoints of membrane fouling resistance ($R_f$), permeate flux (J) and total treated water ($V_T$). $R_f$ decreased, and J and $V_T$ increased as decreasing pH. Turbidity treatment efficiencies were similar at water or nitrogen back-flushing independent of pH, but DOM (dissolved organic matter) treatment efficiency did not have a trend at water back-flushing. $R_f$ at NBF (no back-flushing) with SO (saturated oxygen) was the lower than that at NBF without SO. Also, the DOM treatment efficiency at NBF with SO was the lower than that at NBF without SO. It happened because OH radicals produced by reaction of SO and photocatalyst could dilute with water inside the module. The DOM treatment efficiency of gas back-flushing showed the larger than that of water back-flushing at back-flushig period 10 min. It proved that the adsorption or photo-oxidation of PES beads could be activated by the more effective bead-cleaning of gas back-flushing than water back-flushing.