• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.12A
• /
• pp.1019-1024
• /
• 2003

In the thesis, we propose a new type of the predistortion linearizer using frequency multiplier The linearizer utilizing the 2nd and 3th harmonic used the individual control of the 3rd and 5th order intermodulation distortion(IMD) component. This structure is composed of wilkinson power combiner for combine and isolation of output signal, 3rd order IMD product controller using doubler and 5th order IMD product controller using tripler. The proposed predistortion linearizer controlled by individual order is obtained for about -16 dBc and 18 dBc of 3rd order and 5th order IMD components, respectively, over the frequency band 870 MHz to 880 MHz at the output power of 34 dBm/tone.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.10
• /
• pp.97-102
• /
• 2004

In this paper, a new predistorter controlling modified individual order jntermodulation distortion signals is proposed. The proposed predistorter generates and controls predistorted third and high order IM signals independently. Using predistorted signals, jntermodulation distortion signals of power amplifier are suppressed effectively. The predistortion linearizer has been implemented to operate in Korean PCS basestation transmitting band (1840～1870MHz). The test results show that IMD3 and IMD5 (C/I) of power amplifier are improved more than 40dB and 23dB for CW two tone signals, respectively. The predistorter improves the adjacent channel power ratio (ACPR) more than 10dB at 885KHz offset point for CDMA (IS-95) signals.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.450-457
• /
• 2003

In this paper, we studied the effect of asymmetrical 3rd order IMD of power amplifier due to changes in modulation frequency on IMD cancellation performance. The phase extraction method for determining asymmetric rate for phase distortion of IMD is proposed and the phase difference between lower and upper 3rd order IMD is measured by this method. The phase compensation circuit to decrease the phase difference is also designed and fabricated. From the measurement results using the phase compensation circuit applied to 5 W RF power amplifier fur PCS applications, the 3rd order IMD cancellation performance can be achieved up to 2-tone spacing 1.5 MHz (phase difference within 10$^{\circ}$).

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.9
• /
• pp.28-34
• /
• 2002

In this paper, a new type predistorter using a low frequency intermodulation signals terms of harmonic generator is proposed. A vector modulator, in which fundamental signal is modulated with low frequency intermodulation signals derived from harmonic generator, generates predistorted third and fifth IM components. Using predistorted signals, intermodulation distortion signals of power amplifier suppressed. The suggested predistorter has been manufactured to operate in Korean PCS base-station transmitting band (1840~1870MHz). The test results show that the third IMD signal level is reduced more than 20dB and the fifth IMD signal is reduced about 10dB for CW two-tone signals. The predistorter improves the Adjacent Channel Power Ratio (ACPR) more than 10dB for CDMA (IS-95) signals.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.1 s.104
• /
• pp.45-51
• /
• 2006

In this paper, a new predistortion linearizer for controlling the amplitude of low frequency intermodulation distortion signals is proposed. The low frequency intermodulation distortion(IMD) components are generated by harmonic generator. A vector modulator, modulate fundamental signal with low frequency IMD signals, generates predistortion IMD signals and controls amplitude and phase of them with modulation factors. As a result, this predistorter is suppressed IMD signals of power amplifier effectively. The predistortion linearizer has been manufactured to operate in cellular base-station transmitting band($869{\sim}894\;MHz$). The experimental results show that IMD3 of power amplifier are improved more than 20 dB for CW two-tone signals. Also, it's improved the adjacent channel power ratio(ACPR) more than 10 dB for IS-95 CDMA IFA signals.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.308-315
• /
• 2001

In this paper, a new power amplifier is proposed for reduction of amplified RX band noise signals as well as intermodulation distortion signals using feedforward technique. This power amplifier is implemented for IMT-2000 basestation TX frequency band. Both TX band intermodulation distortion signals and RX band noise signals are reduced by controlling variable attenuator, phase shifter and error amplifier. The proposed power amplifier, which contains two loops-intermodulation distortion signals cancellation loop and RX band noise signals cancellation loop, can provide duplexer with low TX path insertion loss for various wireless communication systems due to choice of loose RX attenuation characteristic. The principle of the proposed amplifier is described graphically based on the conceptual schematic diagram. A two-tone test for power amplifier is done at 2.14GHz with frequency spacing of 5MHz, and RX band rejection test is done over RX full band of 60MHz with 1.95GHz center frequency. Experimental results represent that the cancellation performance of intermodulation distortion signals and RX band noise signals are more than 3 1dB and 21dB, respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.703-705
• /
• 2016

In this paper, we developed a wideband PIMD system to measure passive intermodulation distortion signals of mobile communication RF passive module. To represent wideband characteristic, we designed a receiver that meets low-noise and wideband characteristics in RF receiver. It allows high dynamic range in the RF receiver front end. In designed passive intermodulation distortion measurement system, we programed to display a PIMD signal with FPGA/DSP at PC. Implemented PIMD system was variable from 650 MHz to 2700 MHz and show up to -138 dB minimum detectable $3^{rd}$ passive inetrmodulation distortion signal.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.1 s.104
• /
• pp.67-73
• /
• 2006

This paper proposes a new predistortion linearizer with controlling intermodulation distortion(IMD) signals. This linearizer achieves independent control of third- and fifth-order intermodulation distortion products using amplitude modulation with even harmonic signals. A vector modulator that modulate fundamental signal with both second- and fourth-order harmonic components generated by harmonic generator circuits, generates the inverse characteristics third-and fifth-order intermodulation signals of power amplifier and controls amplitude and phase of them with each other modulation factors. As a results, this linearizer is suppressed IMD signals of power amplifier effectively. The test results show that the third IMD is cancelled more than 25 dB and the fifth order IMD is cancelled about 18 dB for CW two-tone signals. Also, it's improved the adjacent channel power ratio(ACPR) more than 7 dB for IS-95 CDMA signals.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.12
• /
• pp.1193-1200
• /
• 2016

In this paper, we developed a system for measuring a passive intermodulation distortion signal of the mobile communication RF module having a wide band characteristic. The Broadband was designed to represent the characteristics of the receiver to meet the low noise characteristics and wideband characteristics in the RF receiver were to represent a wide dynamic range(high dynamic range)from the RF receiving end. PIMD designed passive intermodulation distortion signal measured by applying the FPGA / DSP in the system was measured to record the program on the PC. Variable up to 650MHz-2700MHz showed up to-138dBc measured PIMD3.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.2 s.314
• /
• pp.32-38
• /
• 2007

This paper represents a Doherty amplifier (DPA) with analog predistorter (PD) to improve the linearity of the DPA while preserving the high efficiency. A third-order PD cancels fifth-order intermodulation (IM5) as well as third-order intermodulation (IM3) components by their same phase difference in the PD and DPA. This is accomplished by independently controlling their phase by using the phase-controlled error generator in the PD. Also, we confirm the phase-control ability of the error generator experimentally with a simple and accurate phase measurement setup. For experimental verification, a third-order PD has been implemented and tested in a 180-W DPA at the wide-band code division multiple access (WCDMA) band of 2.11-2.17 GHz. Two-tone test results show that significant cancellation of IM3 and IM5 components can be obtained. For four-carrier WCDMA applications, significant adjacent channel leakage ratio (ACLR) improvement is achieved over a wide range of output power levels. This technique is cost-effective and convenient due to its simple structure, compact size, and three control parameters.