A Feedforward High Power Amplifier with Loops that can Reduce RX Band Noise as well as Intermodulation Distortion Signals

수신 대력 잡음과 혼변조 왜곡 신호 제거 루프를 갖는 Feedforward 대전력 증폭기 설계

  • Published : 2001.02.01

Abstract

In this paper, a new power amplifier is proposed for reduction of amplified RX band noise signals as well as intermodulation distortion signals using feedforward technique. This power amplifier is implemented for IMT-2000 basestation TX frequency band. Both TX band intermodulation distortion signals and RX band noise signals are reduced by controlling variable attenuator, phase shifter and error amplifier. The proposed power amplifier, which contains two loops-intermodulation distortion signals cancellation loop and RX band noise signals cancellation loop, can provide duplexer with low TX path insertion loss for various wireless communication systems due to choice of loose RX attenuation characteristic. The principle of the proposed amplifier is described graphically based on the conceptual schematic diagram. A two-tone test for power amplifier is done at 2.14GHz with frequency spacing of 5MHz, and RX band rejection test is done over RX full band of 60MHz with 1.95GHz center frequency. Experimental results represent that the cancellation performance of intermodulation distortion signals and RX band noise signals are more than 3 1dB and 21dB, respectively.

본 논문에서, Feedforward 기법을 이용하여 송신 혼변조 왜곡 신호뿐만 아니라 수신 대역 잡음도 감소시킬 수 있는 새로운 전력 증폭기를 제안했다. 대전력 증폭기는 IMT-2000 기지국 송신 주파수 대역에서 구현되었다. 송신 대역 혼변조 왜곡 신호와 수신대역 잡음 신호는 가변 감쇠기와 위상 천이기, 에러 증폭기의 제어에 의해 감소되어진다. 두 개의 루프, 즉 혼변조 왜곡 신호와 수신대역 잡음 신호제거 루프를 포함하고 있는 제안된 전력 증폭기를 사용하면 송신 대역 통과 여파기의 수신 대역 감쇠 특성을 엄격히 하지 않아도 되어 다양한 무선통신 시스템에서 낮은 송신경로 삽입 손실을 가진 듀플렉서를 제공할 수 있다. 전력 증폭기의 2-tone 실험은 5MHz 주파수 간격을 가진 2.14GHz에서 하였고, 수긴 대역 제거 실험은 중심 주파수가 1.95GHz인 60MHz 수신 전체 대역에서 하였다. 실험 결고, 혼변조 왜곡 제거 성능과 수신 잡음 제거 성능이 각각 31 dB와 21dB이상이었다.

Keywords

References

  1. Feedforward Linear Power Amplifiers N. Pothecary
  2. MICROWAVE TRANSISTOR AMPLIFIERS Analysis and Design G. Gonzalez
  3. IEEE Trans. On Microwave Theory and Techniques v.42 no.6 Reduction of noise and distortion in amplifiers using adaptive cancellation A. K. Talwar
  4. Microwave & RF Design linear feedforward amps for PCN systems D. Myer
  5. RF Design A high power, low distortion feed-forward amplifier W. Koprowksi
  6. Microwaves Journal v.37 no.2 High-power feedforward amplification system R. Vitkovich;D. Myer
  7. RF Design An HF dynamic range amplifier using feedforward techniques J. Yamas
  8. IEEE MTT-S Int. Microwave Symp. Dig. Analysis and design of feedforward power amplifier S. Kang;I. Lee;K. Yoo
  9. Proc. 24th European Microwave Conf. High efficiency feedforward linearizers M. T. Hickson;D. K. Paul;P. Gardner;K. Konstantinou
  10. Microwave and Millimeter Wave Phase Shifter S. K. Koul;B. Bhat
  11. Proc. Asia Pacific microwave Conf. Design of the Noble Vector Modulator Y. C. Jeong;C. D. Kim
  12. Microwave Engineering D. M. Pozar
  13. Microwave Solid State Circuit Design I. Bahl;P. Bhartla