• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.539-542
• /
• 2003

In South Korea, flooding is controlled with large or small reservoirs scattered spatially over the territory. Because recent unexpected hard-rain events requires more flood control capacities, the pre-release system is considered with the most economical alternative. In this case time and volume of discharge should be determined by the simulation. But, existing pre-release simulation system has the problem of specificity. Therefore, GASS is considered to estimate the pre-release time and volume with different configurations of pre-release system. This paper shows that pre-release simulation system could be constructed with arranging GASAtmosphere, GASWatershed, Reservoir, Gate components using GASS. It is also shows that GASS could be used as a foundation for constructing pre-release simulation system that is easy to use and is flexible to reflect the changing configurations of reservoir systems.

• 제어로봇시스템학회논문지
• /
• 제19권7호
• /
• pp.587-591
• /
• 2013

This paper addresses the robust fault tolerant controller design problems of static output systems with disturbance. The fault is expressed by the abrupt chattering of system parameters. The design conditions are derived in terms of linear matrix inequalities and linear matrix equalities. An illustrative example is provided to verify performances of the proposed controller.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.293-296
• /
• 2006

Normally, using coating material could result in different performance according to the various changes of environments or operation conditions. For these reasons, there are decreasing tendency for the durability, beauty and scenery of structures as the separation or exfoliation occurred after operation. Especially we must find out not only bond strength characteristics of coating material under temperature conditions but also bond strength reduction under heating-cooling repeat test because Korea has four distinct seasons. In this paper, the deformation and bond strength characteristics of coating material have been investigated. and we suggest some preliminary data of coating material for its best performance under various temperature condition.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.173-176
• /
• 2006

Concrete has been considered as a semi-permanent structural material, because its excellent durability. But concrete durability is affected by carbon dioxide, chloride, water, etc. This study is about surface protection materials-one materials is silane type and the other silicate type for the promoting of concrete durability. As a results, Silane type could protect affection of chloride(Cl-), water(H2O), carbon dioxide(CO2). Also silicate type could improve the abrasion of concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.289-290
• /
• 2009

본 연구는 알루미나 시멘트 콘크리트(CAC)를 이용하여 염화물의 대한 철근 부식의 저항성을 압축 강도, 염분 침투, 부식을 각각 실험을 통하여 측정하였다. 알루미나 시멘트가 보통 포틀랜드 시멘트(OPC)보다 철근 부식 저항성이 뛰어난 결과가 나왔다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.630-632
• /
• 1999

In this paper, we develop intelligent digitally redesigned PAM and PWM fuzzy controllers for nonlinear systems. Takagi-Sugeno fuzzy model is used to model the nonlinear systems and a continuous-time fuzzy-model-based controller is designed based on the extended parallel-distributed-compensation method. The digital controllers are determined from existing analogue controllers. The proposed method provides an accurate and effective method for digital control of continuous·time nonlinear systems and enables us to efficiently implement a digital controller via pre-determined continuous-time TS fuzzy-model-based controller. We have applied the proposed method to the balancing problem of the inverted pendulum to show the effectiveness and feasibility of the method.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.211-212
• /
• 2010

본 연구는 플라이애시를 혼입한 콘크리트의 물시멘트비에 따른 동결융해 저항성을 알아보기 위해 페이스트, 모르타르, 콘크리트 시편을 제작, 실험을 진행하였다. 페이스트와 모르타르는 길이, 무게변화를 측정하였으며 콘크리트는 질량변화와 동탄성계수를 측정함으로써 동결융해 저항성을 측정하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.363-364
• /
• 2008

Localization algorithms are required for indoor sensor network applications. In this paper, we introduce an efficient algorithm for low complexity and high accuracy, termed multi-internal division localization(MID), which emphasizes simple refinement and low system-load for low-cost and low-rate wireless sensors. We inspect MID algorithm through MATLAB simulation.

• 제어로봇시스템학회논문지
• /
• 제18권5호
• /
• pp.407-412
• /
• 2012

In this paper, we discuss an observer-based fault tolerant controller design for the unmanned aerial vehicle (UAV) systems with exogenous disturbance. To derive robust controller design conditions, we use $H_{\infty}$ design technique. The design conditions are derived in terms of linear matrix inequalities. An illustrative example is provided to show the effectiveness of the proposed methodology.

• 전자공학회논문지A
• /
• 제31A권12호
• /
• pp.64-70
• /
• 1994

In this paper, we inverstigated how a parricular internal inverter circuit, which is located far from the input protection in CMOS DRAM, can be easily damaged by external ESD stress, while the protection circuit remains intact. It is shown in a mega bit DRAM that the internal circuit can be safe from ESD by simply improving the input protection circuit. An inverter, which consists of a relatively small NMOSFET and a very large PMOSFET, is used to speed up DRAMs, and the small NMOSFET is vulnerable to ESD in case that the discharge current beyond the protection flows through the inverter to Vss or Vcc power lines on chip. This internal circuit damage can not be detected by only measuring input leakage currents, but by comparing the standby and on operating current before and after ESD stressing. It was esperimentally proven that the placement of parasitic bipolar transistor between input pad and power supply is very effective for ESD immunity.