• The Korean Journal of Petroleum Geology
• /
• v.12 no.1
• /
• pp.34-42
• /
• 2006

Ichnology is the study of traces made by various organisms, which includes classification and description of traces, and interpretation of sedimentary process, behavior of organism and depositional environment based on traces and organism behavior. Ichnofacies, which is defined as the association of several traces related together with substrate characteristics and sedimentary processes, is closely related to depositional environment. Ichnology has been applied to sedimentology (to understand physical characteristics of depositional environment, sedimentation pattern and event bed), sequence stratigraphy (to recognize sequence boundaries and biostratigraphic discontinuities such as MFS, TSE and RSE), oil exploration (providing of many information without big cost) and palaeocology. Preliminary ichnological study on the Ganghwa intertidal flat shows that dominant ichofacies are changing with season and location, suggesting that their seasonal variation would be a good indicator to understand the seasonal change of sedimentary processes, the small- scale change of sedimentary environment and the preservation potential of such units. Ichnology on intertidal flat in western coast of Korea has a great potential to apply its results to petroleum geology as well as sedimentology.

• Journal of Conservation Science
• /
• v.26 no.1
• /
• pp.69-76
• /
• 2010

As the tangible evidence, documentary art records are permanent records to reflect the historical, symbolical, cultural and artistic value. Also, documentary art records are related with mission fulfillment of public institution and it is documentary with administrative, cultural and artistic values as the works of documentary production and application of the administrative image. "The public records management law" was the first time that administration documents were incorporated and in the act No. 3 of administrative records management, the preservation and management system of documentary art records became legislated. The management of documentary art records are difficult to categorize only by the reflect of characteristics or materials. Because documentary art records are collected in many ways and made with materials. It needs to be collected with many informations on basic materials and with the appropriate conservation and management category. Documentary art records do not have lots of demands but the level of consciousness is improving and the possibility of opening to public is increasing for improvement with the right to know. In near future, the documentary art records will be used for the interpretation of historical and cultural preservation and modern cultural heritage could have the value as it is expected. Primarily to prevent deterioration on documentary art records the standard survey card should be made to categorize the damage rate and to check the status on each documentary art records. In addition, establishing a systematic management plan for various documentary art records are needed with the training of professionals for the conservation of documentary art records.

• Archives of design research
• /
• v.18 no.1 s.59
• /
• pp.105-114
• /
• 2005

With the upcoming Digital age, it is time to develop digitalized contents based on cultural basis. in this respect, Kimchi is one of the most primal cultural content signifying Korean culture. It's no doubt the time to initiate the movement to digitalize the contents concerning Kimchi by gathering materials on the origin of Kimchi culturally and a great value to revive digital contents regarding Kimchi. Therefore, in this research, it is regarded that Kimchi is one of the most prominent cultural value that is possible to inherit from generations and should be stratified on the database. A method explaning Korean Kimchi culture is sought in this paper. And It is focused on the culture of Korean Kimchi profoundly and focus on detailed context and varied styles of he digital contents. It is organized on the basis of various aged volumes regarding Kimchi classified by seasons, ingredients, Jonga Kimchi (Kimchi inherited from the oldest family by generations), 24 seasonal divisions of the year, and 8 regional divisions of the nation. It is planned to set up digitally-focused library regarding cultural origin of contents and to present solidity and a feeling of being dynamic The results could be used in a variety of Industries in tourism, education, Kimchi and building basic infrastructure in entertainment industry. It is also applied to specialized industry by providing cultural contents and it could contribute to activation of Kimchi industry with e-Market and portal site regarding Kimchi. Moreover, it may re-establish the cultural value of Kimchi and provide the infrastructure in Kimchi-related industry such as Kimchi cyber museum, Kimchi Expo, Kimchi town by using educational materials in Education industry fields (regular curriculum and experience tour).

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.3
• /
• pp.233-238
• /
• 2005

3-D virtual city model is becoming increasingly important for a number of GIS applications. For reconstruction of 3D building in urban area aerial images, satellite images, LIDAR data have been used mainly and most of researches related to 3-D reconstruction focus on development of method for extraction of building height and reconstruction of building. In case of automatically extracting and reconstructing of building height using only aerial images or satellite images, there are a lot of problems, such as mismatching that result from a geometric distortion of optical images. Therefore, researches of integrating optical images and existing digital map (1/1,000) has been in progress. In this paper, we focused on extracting of building height by means of interest points and vertical line locus method for reducing matching points. Also we used digital plotter in order to validate for the results in this study using aerial images (1/5,000) and existing digital map (1/1,000).

• Journal of Internet Computing and Services
• /
• v.13 no.3
• /
• pp.49-59
• /
• 2012

Throughout developing digital technology, reproduction of image is growing better day by day. And at the same time, diverse image editing softwares are developed to manage images easily. In the process of editing images, those programs could delete or modify EXIF files which have the original image information; therefore images without the origin source are widely spread on the web site after editing. This matter could affect analysis of images due to the distortion of originality. Especially in the court of law, the source of evidence should be expressed clearly; therefore digital image EXIF file without deletion or distortion could not be the objective evidence. In this research, we try to trace the identification of a digital camera in order to solve digital images originality, and also we focus on lens distortion correction algorism which is used in digital image processing. Lens distortion correction uses mapping algorism, and at this moment it also uses interpolation algorism to prevent aliasing artifact and reconstruction artifact. At this point interpolation shows the similar mapping pattern; therefore we want to find out the interpolation evidence. We propose a minimum filter algorism in order to detect interpolation pattern and adjust the same minimum filter coefficient in two areas; one has interpolation and the second has no interpolation. Throughout DFT, we confirm frequency character between each area. Based on this result, we make the final detection map by using differences between two areas. In other words, thereby the area which has the interpolation caused by mapping is adjusted using minimum filter for detection algorism; the second area which has no interpolation tends to different frequency character.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.1 no.1
• /
• pp.23-26
• /
• 2008

Ultrasonography (USG) is widely accepted diagnostic method for the rotator cuff tear. The availability, low cost, easy to access is main factors that favor USG as a primary diagnostic modality for various cuff disorders. We experienced a case of discrepancy between USG, MR arthrography (MRA) and arthroscopic examination. Seventy four year old female patient complained of right shoulder pain. USG depicted rotator cuff tear with the size of 1cm, and MRA demonstrated about 3cm sized tear. Complex massive tear with delamination of degenerated rotator cuff was identified in the arthroscopic examination. When we encounter a patient who has loss of rotator cuff power or severe symptom than findings of USG, MRA or repeat USG is warranted. We report a case of discrepancy between examination modalities with brief review of the literature.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04a
• /
• pp.37-39
• /
• 2001

반도체 설계는 급속한 기능 추가와 기가 헬쯔에 육박하는 고속 동작에 부응하는 제품의 설계와 빠른 출시를 위하여 다방면의 연구를 거듭하고 있다. 하지만, 인터넷과 정보 가전의 모바일 기기에서 요구하는 폭발적인 기능의 추가와 가전기기의 최소화를 위하여서는 그 요구를 감당하지 못하고 있다. 이를 위한 방안으로 설계 재활용과 System-On-Chip의 설계가 수년 전부터 대두되었으나 아직 큰 실효를 거두지 못하고 있다. SoC설계는 다기능을 한 칩에 구성하는 방법을 시도하고 있고, 설계 재활용은 기존의 설계(IP)를 다른 것과 혼합하여 필요한 기능을 제공하는 방법이 시도되고 있다. 이 두가지의 VLSI 설계 방식 흐름을 가능하도록 하기 위한 연구로써, 레이아웃 이식에 관한 연구를 진행하였다. IP 재활용을 위하여서는 다양한 공정변화에 신속히 대응하고, 기존의 설계 설계규칙으로 설계된 면을 현재의 공정인 0.25um, 0.18um 테크놀러지에 맞도록 변환하는 VLSI 소프트웨어 시스템을 필요로 한다. 레이아웃 설계도면을 분석하여 소자 및 배선을 인식하는 알고리즘을 연구와 개발하고, 도면을 첨단 테크놀러지의 설계 규칙에 부응하도록 타이밍, 소비 전력, 수율을 고려한 최적의 소자 및 배선의 크기를 조절하는 방법을 고안하며, 칩 면적을 최적화할 수 있는 컴팩션 알고리즘을 개발하여 레이아웃 설계 도면을 이식할 수 있는 자동화 소프트웨어 시스템을 연구하였다. 더불어, 현재 반도체 소프트웨어 시스템의 최대 문제점에 해당하는 처리 속도와 도면의 처리 능력을 비교, 검토하여 본 연구가 속도면에서 평균 27배 효율면에서 3배 이상의 상대우위를 점하였다.전송과 복원이 이루어질 것이다.하지 않은 경우 단어 인식률이 43.21%인 반면 표제어간 음운변화 현상을 반영한 1-Best 사전의 경우 48.99%, Multi 사전의 경우 50.19%로 인식률이 5~6%정도 향상되었음을 볼 수 있었고, 수작업에 의한 표준발음사전의 단어 인식률 45.90% 보다도 약 3~4% 좋은 성능을 보였다.으로서 hemicellulose구조가 polyuronic acid의 형태인 것으로 사료된다. 추출획분의 구성단당은 여러 곡물연구의 보고와 유사하게 glucose, arabinose, xylose 함량이 대체로 높게 나타났다. 점미가 수가용성분에서 goucose대비 용출함량이 고르게 나타나는 경향을 보였고 흑미는 알칼리가용분에서 glucose가 상당량(0.68%) 포함되고 있음을 보여주었고 arabinose(0.68%), xylose(0.05%)도 다른 종류에 비해서 다량 함유한 것으로 나타났다. 흑미는 총식이섬유 함량이 높고 pectic substances, hemicellulose, uronic acid 함량이 높아서 콜레스테롤 저하 등의 효과가 기대되며 고섬유식품으로서 조리 특성 연구가 필요한 것으로 사료된다.리하였다. 얻어진 소견(所見)은 다음과 같았다. 1. 모년령(母年齡), 임신회수(姙娠回數), 임신기간(姙娠其間), 출산시체중등(出産時體重等)의 제요인(諸要因)은 주산기사망(周産基死亡)에 대(對)하여 통계적(統計的)으로 유의(有意)한 영향을 미치고 있어 $25{\sim}29$세(歲)의 연령군에서, 2번째 임신과 2번째의 출산에서 그리고 만삭의 임신 기간에, 출산시체중(出産時體重) $

• Journal of the Korean Arthroscopy Society
• /
• v.14 no.1
• /
• pp.49-52
• /
• 2010

Purpose: We introduce arthroscopically assisted mini-open rotator cuff repair using anterolateral approach. Operative Technique: Placing lateral decubitus position on general anesthesia, a standard arthroscopic glenohumeral examination is performed to evaluate lesions of shoulder joint through posterior and anterior portal. And then arthroscope is placed in the subacromial space and we evaluate the size of the torn tendon and perform arthroscopic acromioplasty through lateral portal. A 3 to 4 cm skin incision is performed from anterolateral edge of acromion to distal and dissected along to raphe between anterior and middle deltoid. A deltoid retractor is then placed, allowing direct visualization of the rotator cuff and humeral head. As torn tendon is tagged by traction suture, we try to anatomical reduction on the footprint and then perform single row or double row repair of the rotator cuff using suture anchors. To prevent avulsion of the deltoid from the acromion, additional sutures by bone tunnel with acromion and deltoid is performed. Conclusion: This technique is useful procedure to get direct approach to anterior portion of supraspinatus tendon and to need lesser deltoid retraction than portal extension approach due to dividing along to raphe between anterior and middle deltoid. Also it provide better visualization of the superior portion of subscapularis and infraspinatus.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.37 no.1
• /
• pp.55-63
• /
• 2000

This paper investigated the sub-region compression effect of the three dimensional DCT(3D-DCT) using the difference component(DC) of inter-frame in images. The proposed algorithm are the method that obtain compression effect to divide the information into subband after 3D-DCT, the data appear the type of cubic block(8${\times}$8${\times}$8) in eight difference components per unit. In the frequence domain that transform the eight differential component frames into eight DCT frames with components of both spatial and temporal frequencies of inter-frame, the image data are divided into frame component(8${\times}$8 block) of time-axis direction into 4${\times}$4 sub block in order to effectively obtain compression data because image components are concentrate in corner region with low-frequency of cubic block. Here, using the weight of sub block, we progressed compression ratio as consider to adaptive sub-region of low frequency part. In simulation, we estimated compression ratio, reconstructed image resolution(PSNR) with the simpler image and the complex image contained the higher frequency component. In the result, we could obtain the high compression effect of 30.36dB(average value in the complex-image) and 34.75dB(average value in the simple-image) in compression range of 0.04~0.05bpp.

• Journal of Korean Society of Forest Science
• /
• v.102 no.3
• /
• pp.372-381
• /
• 2013

The leaf growth and physiological characteristics of Forsythia saxatilis were investigated under different relative light intensities (RLI) and fertilization levels in order to find out the optimum environmental conditions for in-situ restoration. RLI and fertilization were four levels (30%, 43%, 63% of full sun and full sun) and three levels (non-fertilization, 2 times and 3 times of average forest soil in Korea), respectively. According to the increase of fertilization level under all RLI, leaf area increased and leaf dry weight and the ratio of leaf dry weight to leaf area decreased. As the fertilization level increased, photosynthetic pigment contents such as chlorophyll a, b and carotenoid under all RLI decreased. And pigment contents were the highest under full sun in the same fertilization level. Foliar nitrogen content under fertilization was higher than that under non-fertilization, and chlorophyll/nitrogen ratio decreased with the increase of fertilization level under all RLI. The increase of photosynthetic rate was observed with the increase of fertilization level at 63% of RLI and full sun, and dark respiration rate under fertilization was lower than under non-fertilization. Apparent quantum yield was lower at non-fertilization than that of fertilization, and it was highest at 63% of RLI under the same fertilization level. In conclusion, leaf growth and physiological characteristics of F. saxatilis could be improved under higher light conditions and fertilization.