• The Journal of the Acoustical Society of Korea
• /
• v.20 no.4
• /
• pp.22-28
• /
• 2001

This paper describes the implementation of a robust speaker position location system using the voice signal received by microphone array. To be robust to the reverberation which is the major factor of the performance degradation, low-frequency phase restoration algorithm which eliminates the influence of reverberations using the low-frequency information of the CPSP function is proposed. The implemented real-time system consists of a general purpose DSP (TMS320C31 of Texas instruments), analog part which contains amplifiers and filters, and digital part which is composed of the external memory and 12-bit A/D converter. In the real conference room environment, the implemented system that was constructed by the proposed algorithms showed better performance than the conventional system. The error of the TDOA estimation reduced more than 15 samples.

• Journal of Conservation Science
• /
• v.32 no.1
• /
• pp.51-61
• /
• 2016

'Eojin', king's portraits, had been produced during the Joseon dynasty. The portrait of King Taejo, the founder of the Joseon dynasty, remain at National Palace Museum of Korea and Gyeonggijeon portrait hall in Jeonju and Junwonjeon portrait hall in North Korea that has been recorded in original glass plate photo in 1911. Many replica of Eojin have been made since it is important to preserve and protect original one. In this study, the portrait of King Taejo, which is possessed by National Palace Museum of Korea, was researched for making replication standard version of the original form. It was focused on derivations of each artefacts and drawing lines those had been described on the picture including comparison among three portraits of King Taejo. Producing the replication standard version of King Taejo's portrait, the digital restoration techniques by the method of partition area scanning was applied. Accurate and precise detail result that is taken by digital imaging technique gives additional information regarding the relations among three portraits of King Taejo.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1961-1966
• /
• 2016

Compressive sensing has proved that a signal can be restored from less samples than the Nyquist rate. Reducing the required data rate is essential for a variety of fields including compression, transmission, and storage. It has been made lots of attempt to apply the compressive sensing theory into data intensive fields, such as image processing which needs to cover 4K and 8K pictures. In this paper, an image acquisition algorithm based on compressive sensing is proposed. It combines DCT, which can compact the energy of a image into a few coefficients, and the Noiselet transform, which is incoherent with DCT. The DCT coefficients represent the coarse structure of the images while the Noiselet information holds the fine details. Performance experiments with several images show that the proposed image acquisition algorithm not only outperforms the previous results, but also improves the reconstruction quality faster as the number of measurements increases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9B
• /
• pp.1360-1368
• /
• 2010

Recently, as the development of Radio Frequency Identification (RFID) technology becomes active, the demand for services which can electronically manage the history and location information of major trees, including trees for cultural heritage restoration and nurse trees, has been increased. This information has been managed by separated drawings and documents or storing its information into PDAs and then structuring data files through input and computation. But, these methods imply limitations in terms of its extensibility and scalability. This paper has designed and implemented an RFID based Tree History Information System (THIS) for cultural heritage restoration. The purpose of the proposed system is to support to be able to effectively and consistently manage historical information of major trees and improve working processes by implementing mobile RFID services through wireless Internet or Local Area Network (LAN) as mobile communication networks. Through implementation, it is confirmed that the proposed system can manage the historical information of major trees more effectively than conventional methods and also improve previous field working conditions.

• Ecology and Resilient Infrastructure
• /
• v.1 no.2
• /
• pp.82-93
• /
• 2014

In recent years, "ecological river restoration" taking into account the flood control, water utilization and environmental aspects of rivers is actively being investigated. However, it is hard to understand the inhabitation conditions of living organisms that live on the river with distinct characteristics have been fully reflected, and with the use of limited methods, it ends in uniformed composition of artificial rivers and a mere customary stream channel maintenance, resulting in frequently disturbed stream channel habitats As a fundamental study for investigating the habitats of living organisms that live on rivers, this study intends to examine each habitat type by dividing domestic rivers into sand rivers and gravel rivers depending on the nature of rivers and dividing sections of each river into central river sections and natural river sections. As a result, more diverse habitat types of organisms were found in the gravel rivers rather than in the sand rivers, and the habitat types of organisms in the central river sections where the river restoration project have been already conducted reached approximately 56.3 % of those that appeared in the natural river sections.

• The KIPS Transactions:PartB
• /
• v.9B no.5
• /
• pp.563-570
• /
• 2002

Robust extraction of 3D facial features and global motion information from 2D image sequence for the MPEG-4 SNHC face model encoding is described. The facial regions are detected from image sequence using multi-modal fusion technique that combines range, color and motion information. 23 facial features among the MPEG-4 FDP (Face Definition Parameters) are extracted automatically inside the facial region using color transform (GSCD, BWCD) and morphological processing. The extracted facial features are used to recover the 3D shape and global motion of the object using paraperspective camera model and SVD (Singular Value Decomposition) factorization method. A 3D synthetic object is designed and tested to show the performance of proposed algorithm. The recovered 3D motion information is transformed into global motion parameters of FAP (Face Animation Parameters) of the MPEG-4 to synchronize a generic face model with a real face.

• Ecology and Resilient Infrastructure
• /
• v.6 no.3
• /
• pp.145-153
• /
• 2019

The present study performed the impact of the change of low-flow channel on aquatic habitat in a reach of the Wonju-cheon Stream, Korea. The target species was Zacco platypus, a dominant species in the middle- and upper-stream of Wonju Cheon. The River2D model was used for the computation of the flow and the habitat suitability index model was used to estimate the quantity and quality of fish habitat using habitat suitability curves. First, for the restoration to low-flow channel, the restoration was conducted in a form close-to-nature flow channel, and the width of the low-flow channel was expanded and reduced. The results indicated that the Weighted Usable Area (WUA) of the target species improved by about 72% when the width of the low-flow channel was expanded, and that the fish habitat decreased by about 25% when the width of the low-flow channel was reduced.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.118-135
• /
• 2020

It is not uncommon in Korea to see the structure and function of a garden remain intact as well as its form. Yi Cheon-bo's Historic House (Gyeonggi-do Cultural Heritage Item No. 55), located in Sang-myeon, Gapyeong-gun, Gyeonggi-do, is considered an example of very valuable garden heritage, although its family history, location, and remaining buildings and natural cultural assets are not fully intact. Along with Yi Cheon-bo's Historic House, this study attempted to explore the possibility of restoration of the forest houses and gardens by highlighting the high value of Yi Cheon-bo's Historic House through research into the typical layout of private households in northern Gyeonggi Province and Gapyeong County, comparative review of aerial photographs from 1954, and interviews with those involved. The results of the study are as follows: In this study, the presence of Banggye-dongmun and Bansukam in the Banggyecheon area, where the location of the garden was well-preserved, was examined across the landscape of the outer garden, while the location of Yi Cheon-bo's Historic House, the appearance of feng shui, and the viewing axis were considered. Also, the appearance of the lost main house was inferred from the arrangement and shape of the Sarangchae and Haengrangchae that remain in the original garden, and the asymmetry of the Sarangchae Numaru and the hapgak shape on the side of the roof. In addition, the three tablets (Pyeonaeks) of Sanggodang (尙古堂), Bangyejeongsa (磻溪精舍), and Okgyeongsanbang (玉聲山房) were used to infer the landscape, use, and symbolism of the men's quarters. Also, a survey was conducted on the trees that existed or existed in the high prices. Incidentally, it was confirmed that information on boards and cultural properties of Yeonha-ri juniper (Gyeonggi-do Monument No. 61) was recorded to a much lesser extent than the actual required standard, and the juniper trees remaining in the front of Haengrangchae should also be re-evaluated after speculation. On the other hand, as a result of estimating the original shape as a way of pursuing completeness of the garden through restoration of the lost women's quarters and shrine, it is estimated that the main house was placed in the form of a '口' or a 'be warped 口' on the right (north) side of the men's quarters. By synthesizing these results, a restoration alternative for Yi Cheon-bo's Historic House was suggested.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.2
• /
• pp.76-95
• /
• 2011

After dismantled, Mireuksajiseoktap(Stone pagoda of Mireuksa Templesite) is being in the stage of restoration design. Now, different ways - producing restoration model, a 3 dimension simulation - have been requested to make more detailed and clearer restoration design prior to confirmation of its restoration design and actual restoration carry-out. This thesis proposes the way to build the detailed model for better restoration plan using extensively-used Reverse Engineering technique and Rapid Prototyping. It also introduces each stage such as a 3-dimension actual measurement, building database, a 3-dimension simulation etc., to build a desirable model. On the top of that, this thesis reveals that after dismantled, MIruksaji stone pagoda's interior and exterior were not constructed into pieces but wholeness, so that its looks can be grasped in more virtually and clearly. Secondly, this thesis makes a 3-dimension study on the 2-dimension design possible by acquiring basic materials about a 3-dimension design. Thirdly, the individual feature of each member like the change of member location can be comprehended, considering comparing analysis and joint condition of member. Lastly, in the structural perspective this thesis can be used as reference materials for structure reinforcement design by grasping destructed aspects of stone pagoda and weak points of the structure. In dismantlement-repair and restoration work of cultural properties that require delicate attention and exactness, there may be evitable errors on time and space in building reinforcement and restoration design based on a 2-dimension plan. Especially, the more complicate and bigger the subject is, the more difficult an analysis about the status quo and its delicate design are. A series of pre-review, based on the 3-dimension data according to actual measurement, can be one of the effective way to minimize the possibility that errors about time - space happen by building more delicate plan and resolving difficulties.

• Conservation Science in Museum
• /
• v.26
• /
• pp.25-34
• /
• 2021

3D printing technology has been actively applied for the restoration of cultural properties. However, its application to the restoration of glass cultural properties has not yet been reported and thus requires further study. In this study, 3D printing technology was used to restore a defective part of a glass sarira bottle that forms an element of a series of sarira reliquaries commissioned by Yi Seonggye (known as King Taejo after founding the Joseon Dynasty) that was excavated from Geumgangsan Mountain (designated as Treasure No. 1925) and is currently housed at the National Museum of Korea. The defective area was reproduced using 3D printing and the printed reproduction was reproduced again using an epoxy resin. This latter piece was used as the restoration component rather than the 3D printed element. After the completion of the conservation treatment, the materials used for the 3D printing were compared with transparent materials used to restore ceramics to evaluate their usability and stability. A total of five specimens were produced, including from photocurable resin made by a stereo lithography apparatus (SLA), epoxy resin, acrylic resin, and more. They were exposed to UV for 96 hours to test for yellowing. Of the two specimens made of photocurable resins and exposed to UV, one was sprayed with a UV blocking agent but the other was exposed as-is. The UV exposure test showed that the specimen made by the SLA and sprayed with a UV blocking agent and the specimen made of epoxy resin were stable in terms of yellowing with a change in the b-value was less than 1. They are thus considered to be suitable materials for the restoration of glass cultural properties. Such glass cultural properties are often diverse in shape and their restoration can be difficult as they generally consist of a range of complex parts that hamper restoration. In this regard, diverse materials should be considered when selecting materials for the restoration of glass cultural properties.