• Journal of Soil and Groundwater Environment
• /
• v.12 no.5
• /
• pp.19-32
• /
• 2007

In Korea, there have been various methods of estimating groundwater recharge which generally can be subdivided into three types: baseflow separation method by means of groundwater recession curve, water budget analysis based on lumped conceptual model in watershed, and water table fluctuation method (WTF) by using the data from groundwater monitoring wells. However, groundwater recharge rate shows the spatial-temporal variability due to climatic condition, land use and hydrogeological heterogeneity, so these methods have various limits to deal with these characteristics. To overcome these limitations, we present a new method of estimating recharge based on water balance components from the SWAT-MODFLOW which is an integrated surface-ground water model. Groundwater levels in the interest area close to the stream have dynamics similar to stream flow, whereas levels further upslope respond to precipitation with a delay. As these behaviours are related to the physical process of recharge, it is needed to account for the time delay in aquifer recharge once the water exits the soil profile to represent these features. In SWAT, a single linear reservoir storage module with an exponential decay weighting function is used to compute the recharge from soil to aquifer on a given day. However, this module has some limitations expressing recharge variation when the delay time is too long and transient recharge trend does not match to the groundwater table time series, the multi-reservoir storage routing module which represents more realistic time delay through vadose zone is newly suggested in this study. In this module, the parameter related to the delay time should be optimized by checking the correlation between simulated recharge and observed groundwater levels. The final step of this procedure is to compare simulated groundwater table with observed one as well as to compare simulated watershed runoff with observed one. This method is applied to Mihocheon watershed in Korea for the purpose of testing the procedure of proper estimation of spatio-temporal groundwater recharge distribution. As the newly suggested method of estimating recharge has the advantages of effectiveness of watershed model as well as the accuracy of WTF method, the estimated daily recharge rate would be an advanced quantity reflecting the heterogeneity of hydrogeology, climatic condition, land use as well as physical behaviour of water in soil layers and aquifers.

• Journal of forensic and investigative science
• /
• v.2 no.1
• /
• pp.5-22
• /
• 2007

From the numerous social problems generated by the unbalanced social development and the social trend of belittling life overall, we found the causes of suicide getting worse in its seriousness day by day. In reality, the problem has been approached in a collateral level in contrast with other social problems. There have been an active involvement in studying the definition, causes and ways of prevention of suicide theoretically until now. However, different from other social problems, it is almost impossible to treat or fix the problem of suicide. Only ways to treat or fix the problem is when the suicide has ended in failure. Thus, this study intends to examine the suicide rate among the total accidents during the year 2005, perform the analyses on the actual causes according to the relations such as the means of suicide, occupation, age group, educational background, etc. In order to present a solution to the issue of suicide becoming serious each day. Among the total accidents in 2005, the suicide rate came out to be approximately 52.4%. Among the result, 52.4%, male with 69% resulted higher than female with 31%, which appears to be related to the social functions. While men tends to take more active(80%) means of suicide like jumping off, poison, hanging, etc., women tends to take more passive(60%) means of suicide like sleeping pills, slitting wrist, etc. In terms of the cause, pessimism, illness, denial, mental disorder, etc resulted more than 75%, and there were many cases of suicide after exhibiting the signs of depression. Also there were higher suicide rate of the unemployed engaged in direct labor with educational background lower than college level related to the pessimism regarding the family living cost. We were able to determine the recent increase in the suicidal tendency of the educated people higher than the college level and the retired people with depression caused by the sudden change in social status. Overall there are several reasons for suicide, however, in most cases the signs of depression were exhibited until the final suicide, which tells us the serious psychological problem of suicide. Assuming that the current development of suicide will continue in future, the result of this study will guide the corresponding social policies, be utilized in preparing the insurance or management at the national level dealing with the real social problems that are not just a conflict of an individual, but could spread like a fad and become much bigger than the present by the continuous support at the environmental, social and political levels, and be utilized as the basic data to establish the research plan.

• Journal of Korean Home Economics Education Association
• /
• v.31 no.2
• /
• pp.95-111
• /
• 2019

The purpose of this study is to analyze the structure and contents of the articles in the Journal of Korean Home Economics Education Association to review the research trends during the last decade since 2009. In total, 354 articles from 10 volumes, 40 journal books, were analyzed. This amount to 42.3% of total articles in the JKHEEA for the past 30 years. The results showed that the number of articles in the journal continuously decreased by approximately 5 articles each year. More than half of articles were co-authored as a joint-research between professors and teachers or graduate students. The numbers of pages, tables, figures, and references vary greatly among of the articles published in the JKHEEA. The reviewers and authors would need to check if the pages, tables/figures, or references are indispensable, especially in case there are extremely large number of them. Even though survey research with students as participants is still the most common types of research among recent articles, its percentage is decreasing and diverse research methods such as the analysis of textbook or curriculum literature are being used. Also, research integrating the pedagogy and educational content, and in turn developing and evaluating educational programs is increasing, which indicates that the journal identity has become better-defined. It is advisable that authors select the key words that are more relevant to the title, purpose, and research questions. It is expected that the journal revises the publication regulations so that the issues discussed in this study may be reflected.

• Journal of Korean Home Economics Education Association
• /
• v.32 no.3
• /
• pp.161-177
• /
• 2020

This research aims to identify the relevance of 'Adolescence consumption' units to ESD(Education for Sustainable Development), and to analyze the unit's inquiry tendency through the Romey analysis method. The assessment criteria in association with ESD developed in the previous literature were summarized and established to set up an analysis framework consisted of 11 key points including environmental perspective (natural resources, climate change/disaster prevention and mitigation, and sustainable rural and urban systems), economic perspective (corporate sustainability, market economy, and poverty gap mitigation), and socio-cultural perspective (human rights/peace/human protection, cultural diversity and understanding, health/safety, civic engagement, and management of nation). With this framework, the learning contents of 'adolescence consumption life' unit in twelve middle school Home Economics textbooks were analyzed including the texts, images/illustrations/tables/graphs, and activities. The analysis revealed that the core elements of the 'market economy' and 'management of nation' from the economic perspective were presented in three different formats: texts, images/illustrations/tables/graphs, and activities. However, relatively insufficient contents were presented in terms of health/safety, civic engagement, sustainable rural and urban systems, and corporate sustainability, and thus, development of textbooks dealing with various ESD contents is neededrecommended. Additionally, most textbooks' texts and images/illustrations/tables/graphs tend to be authoritative, while activities and assignments exhibited an inquiry tendency. It is advisable to incorporate a wider variety of ESD-related content in Home Economics classes and creatively employ inquiry-based learning activities for the development of pro-sustainable-development consumption values and behavioral tendencies among young students.

• KSBB Journal
• /
• v.14 no.3
• /
• pp.309-314
• /
• 1999

In order to produce high concentration of sodium gluconate, optimization of the fermentation conditions, such as glucose concentration, inoculum size, dissolved oxygen concentration and glucose feeding method, was examined. When the glucose concentration was maintained in the range of 30∼50 g/L during the batch fermentation, glucose conversion yield and productivity were 92.2% and 6.0 g/L/hr, respectively. In the case of the low concentration below 30 g/L, the yield decreased by about 25%. As the inoculum size increased above 20%(w/v), lag phase was shortened but the productivity decreased. The dissolved oxygen level of 60∼70% was shown to be the threshold point for 75% of increase in the productivity of sodium gluconate. Finally, optimal glucose feeding rate was determined using various feeding methods such as exponential feeding, feeding based on the average glucose consumption rate and was determined using various feeding methods such as exponential feeding, feeding based on the average glucose consumption rate and on the oxygen uptake rate and etc. Our result shows that glucose feeding, based on the oxygen uptake rate is a very simple, efficient and robust method, especially when oxygen is consumed as a substrate for the bioconversion. Using the above glucose feeding strategy under the optimized condition, 255 g/L of sodium gluconate concentration, 12 g/L/hr of productivity and 95% of glucose conversion yield were achieved with A. niger ACM53.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.479-489
• /
• 2008

Statement of the problem: Under anatomical limitations on maxillary posterior region, a poor crown-to root ratio acting on dental implants can result in undesirable stress in surrounding bone, which in turn can cause bone defects and eventual failure of implants. Purpose: The purpose is to compare stress distribution due to different crown-root ratio and effect of splinting between natural teeth and implants in maxillary molar area under different loads. Material and methods: Analysis of stress arising supporting bone of the natural teeth and the implant was made with 3-dimensional finite element method. The model simulated naturel teeth was made with 2nd premolar and 1st molar in the maxillary molar region (Model T). The model simulated implants placed on same positions with two parallel implants of Straumann Dental Implant cemented abutment (Model I). Each model was designed in different crown-root ratio (0.7:1, 1:1, 1.25:1) and set cement type gold crown to make it non-splinted or splinted. After that, 300 N force was loaded to each model in five ways (Load 1: middle of occlusal table, Load 2: middle of buccal cusp, Load 3: middle of lingual cusp, Load 4: horizontal load to buccal cusp of anterior abutment only, Load 5: horizontal load to middle of buccal cusp of each abutment), and stress distribution was analyzed. Results and conclusion: On all occasions, stress was concentrated at the cervical region of the implant. Under load 1, 2 and 3, stress was not increased even when crown-root ratio increases, but under load 4 and 5, when crown-root ratio increases, stress also increased. There was difference in stress values between natural teeth and implants when crown-root ratio gradually increases; In case of natural teeth, splinting decreased stress under vertical and horizontal loads. In case of implants, splinting decreased stress under vertical loads 1,2 and 3, but increased maximal stress under loads 2 and 3. Under horizontal loads, splinting decreased stress, however the effect of splinting decreased under load 5 than load 4. Furthermore, the stress was increased, when crown-root ratio is 1.25:1. Clinical implications: This limited finite element study suggests that the stress on supporting bone may be increased under non-axial loads and poor crown-root ratio. Under poor crown-root ratio, excessive stress was generated at the cervical region of the implant, and decreased splinting effect for stress distribution, which can be related to clinical failure.

• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.399-405
• /
• 2020

Recently, it is difficult to produce uniform scions and rootstocks with high quality in a greenhouse due to weather extremes. The closed transplant production system is useful for producing scions and rootstocks with desirable morphological characteristics by environment control regardless of weather outside. In this study, we investigated transpiration rates and growth of cucumber and tomato scions and rootstocks grown under different light intensity conditions for precise irrigation control in a closed transplant production system. Hanging system to measure continuously the weight of plug tray consisting of seedlings and substrate with load-cell was installed in each growing bed. Using this system, we confirmed initial wilting point of cucumber and tomato seedlings, and conducted subirrigation when moisture content of substrate was not below 50%. The irrigation time of cucumber scions and rootstocks were 7 and 6 days after sowing, respectively. In tomato scions and rootstocks grown under PPF (photosynthetic photon flux) 300 μmol·m^-2·s^-1, the irrigation time were 5, 8, 11, and 13 days after sowing. Increasing light intensity increased transpiration rates and differences of transpiration rates by light intensity was higher in tomato seedlings. The growth of cucumber and tomato seedlings was promoted by increasing light intensity, especially, hypocotyl elongation and stem thickening was affected by light intensity. Cumulative transpiration rate of plug tray in cucumber and tomato seedlings was increased by increasing light intensity, and daily transpiration rate per seedling was regressed by 1st-order linear equation with high correlation coefficient. Estimation of transpiration rates by weighing continuously plug tray of vegetable seedlings can be useful to control more accurately irrigation schedule in a closed transplant production system.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.6
• /
• pp.13-24
• /
• 2017

The purpose of this study is to examine the effect of the management of receivables on the management performance of micro manufacturing industries. The results of the survey are as follows. First, among the factors of management of pre- and post-trade receivables in the micro manufacturing industries, management organization and regulations, contract execution management, bad debt control, which are the subordinate factors of credit control, are positive (+) significant effect on stability. In terms of profitability, management organizations and regulations, which are subordinate factors of credit control management, have a positive (+) significant effect on profitability. The recovery management, which is a factor of management of post - receivable receivables, did not have a significant effect on the stability and profitability of financial management performance. Second, the effect of financial performance on organizational satisfaction is positively related to stability, while profitability has no significant effect on organizational satisfaction. The implication of this study is that pre - trade receivables management is more important than post - trade receivables management in the management of accounts receivables of micro manufacturing industries. Proactive credit management refers to the procedure of establishing and managing personal guarantees and physical guarantees in order to smooth the execution of the obligations at the same time as the contract is concluded through processes such as credit investigation, analysis and evaluation, and sales decision before the contract is concluded. Post receivables management based on the assumption of default is a receivables management procedure from receipt of receivables that are already defaulted to bad debts to bad debt processing. If the collection of receivables is delayed or bad debt is increased, Furthermore, a corporation may be subject to bankruptcy risk (insolvency by paper profits). Therefore, it is meaningful that this study suggests direction to induce change of contract type in advance by understanding the possibility of settlement of accounts receivable and recovery of bad debts within the day of transition in case of contract of micro manufacturing industries.

• Investigative Magnetic Resonance Imaging
• /
• v.18 no.4
• /
• pp.341-351
• /
• 2014

Purpose : In this study, the medication effects of Milnacipran and Pregabalin, as well known as fibromyalgia treatment medicine, in fibromyalgia syndrome patients were compared through the change of BOLD signal in pain related functional MRI. Materials and Methods: Twenty fibromyalgia syndrome patients were enrolled in this study and they were separated into two groups according to the treatment medicine: 10 Milnacipran (MLN) treatment group and 7 Pregabalin (PGB) treatment group. For accurate diagnosis, all patients underwent several clinical tests. Pre-treated and post-treated fMRI image with block-designed pressure-pain stimulation for each group were obtained to conduct the statistical analysis of paired t-test and two sample t-test. All statistical significant level was less than 0.05. Results: In clinical tests, the clinical scores of the two groups were not significantly different at pre-treatment stage. But, PGB treatment group had lower Widespread Pain Index (WPI) and Brief Fatigue Inventory (BFI) score than those of MLN treatment group at post-treatment stage. In functional image analysis, BOLD signal of PGB treatment group was higher BOLD signal at several regions including anterior cingulate and insula than MLN treatment group at post-treatment stage. Also, paired t-test values of the BOLD signal in MLN group decreased in several regions including insula and thalamus as known as 'pain network'. In contrast, size and number of regions in which the BOLD signal decreased in PGB treatment group were smaller than those of MLN treatment group. Conclusion: This study showed that MLN group and PGB group have different medication effects. It is not surprising that MLN and PGB have not the same therapeutic effects since these two drugs have different medicinal mechanisms such as antidepressants and anti-seizure medication, respectively, and different detailed target of fibromyalgia syndrome treatment. Therefore, it is difficult to say which medicine will work better in this study.

• Journal of Yeungnam Medical Science
• /
• v.24 no.2
• /
• pp.216-231
• /
• 2007

Background : An acceleration or deceleration of the heart rate (HR), which reflects autonomic effects, is observed before the onset of paroxysmal atrial fibrillation (PAF). The purpose of this study was to assess the discrepancy in the autonomic interactions before the onset of PAF for different patterns of change in the HR. Materials and Methods : From 105 Holter tapes with the PAF recorded, 55 episodes (42 patients, 34 men, $58{\pm}12$ years) of PAF (>5 min), preceded by a sinus rhythm for more than 1 hour, were selected and submitted to time-domain and frequency-domain HR variability analyses. Fifty-five episodes were divided into 2 groups: group A PAF (n=30) with acceleration of the HR during the last 2 minutes before the PAF and group B (n=25) with deceleration of the HR. Results : A significant linear decrease in the mean R-R interval was observed in group A ($924{\pm}30$ to $835{\pm}28ms$, $P$=0.001) and an increase from $831{\pm}32$ to $866{\pm}31ms$ in group B PAF episodes ($P$=0.046). In the frequency-domain analyses, the LF/HF ratio exhibited a progressive linear increase before the PAF in group A ($P$=0.005). The HF normalized units (HFnu) and natural logarithm-transformed HF ($In$HF) values decreased from $30.8{\pm}4.0$ to $16.1{\pm}1.8$ ($P$=0.003) and $4.49{\pm}0.25$ to $4.07{\pm}0.22$ ($P$=0.001), respectively. Contrary to the results in group A, a significant increase in the HF components (HFnu and $In$HF) (from $22.6{\pm}3.2$ to $30.2{\pm}4.0$, $P$=0.005, and $4.27{\pm}0.27$ to 4.75 0.33, $P$=0.001, respectively) and a resultant decrease in the LF/HF ratio were observed in group B PAF episodes. No significant changes were observed in the LF components in either PAF group. Conclusion : Autonomic stimuli leading to an acceleration or deceleration of the HR before the onset of AF are due to parasympathetic modulation. Parasympathetic modulation plays a key role in the initiation of PAF.