• The Korean Journal of Physiology
• /
• v.23 no.1
• /
• pp.79-87
• /
• 1989

Molecular property as well as biological activities of bombesin-like substance (BBS-LS) isolated from the skin of B. orientalis in Korea was compared with those of synthetic BBS-14. BBS-LS in the crude extract was applied on a Sephadex G-50, superfine column $(1.6{\times}112\;cm)$. On chromatogram, the first peak (3.5% of BBS-LS) was found ahead of synthetic GRP-27, and the second peak (rest) between synthetic GRP-27 and synthetic BBS-14. The main form of BBS-LS was successfully purified by using a column of alkaline alumina followed by sequential gel-filtrations on a column of Sephadex G-10, fine and a column of Sephadex G-50, superfine. Chromatographic analysis of the purified BBS-LS using a column of Sephadex G-50, superfine and reversed phase HPLC revealed that the main form of BBS-LS in the skin of B. orientalis could be distinctly different from either BBS-14 or GRP-27 in molecular size. The purified BBS-LS exerted biological activities quite identical to those of synthetic BBS-14. The results of the present investigation indicate that the skin of B. orientalis contains BBS-LS composed of two distinct forms. The main form of BBS-LS purified in the present study is heterogenous to both synthetic BBS-14 and GRP-27 in molecular size but identical to BBS in biological activities.

• Progress in Medical Physics
• /
• v.19 no.1
• /
• pp.73-79
• /
• 2008

Retinal prosthesis is regarded as the most feasible method for the blind caused by retinal diseases such as retinitis pigmentosa (RP) or age related macular degeneration (AMD). Recently Korean consortium launched for developing retinal prosthesis. One of the prerequisites for the success of retinal prosthesis is the optimization of the electrical stimuli applied through the prosthesis. Since electrical characteristics of degenerate retina are expected to differ from those of normal retina, we performed voltage stimulation experiment both in normal and degenerate retina to provide a guideline for the optimization of electrical stimulation for the upcoming prosthesis. After isolation of retina, retinal patch was attached with the ganglion cell side facing the surface of microelectrode arrays (MEA). $8{\times}8$ grid layout MEA (electrode diameter: $30{\mu}m$, electrode spacing: $200{\mu}m$, and impedance: $50k{\Omega}$ at 1 kHz) was used to record in-vitro retinal ganglion cell activity. Mono-polar electrical stimulation was applied through one of the 60 MEA channel, and the remaining channels were used for recording. The electrical stimulus was a constant voltage, charge-balanced biphasic, anodic-first square wave pulse without interphase delay, and 50 trains of pulse was applied with a period of 2 sec. Different electrical stimuli were applied. First, pulse amplitude was varied (voltage: $0.5{\sim}3.0V$). Second, pulse duration was varied $(100{\sim}1,200{\mu}s)$. Evoked responses were analyzed by PSTH from averaged data with 50 trials. Charge density was calculated with Ohm's and Coulomb's law. In normal retina, by varying the pulse amplitude from 0.5 to 3V with fixed duration of $500{\mu}s$, the threshold level for reliable ganglion cell response was found at 1.5V. The calculated threshold of charge density was $2.123mC/cm^2$. By varying the pulse duration from 100 to $1,200{\mu}s$ with fixed amplitude of 2V, the threshold level was found at $300{\mu}s$. The calculated threhold of charge density was $1.698mC/cm^2$. Even after the block of ON-pathway with L-(1)-2-amino-4-phosphonobutyric acid (APB), electrical stimulus evoked ganglion cell activities. In this APB-induced degenerate retina, by varying the pulse duration from 100 to $1200{\mu}s$ with fixed voltage of 2 V, the threshold level was found at $300{\mu}s$, which is the same with normal retina. More experiment with APB-induced degenerate retina is needed to make a clear comparison of threshold of charge density between normal and degenerate retina.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.6
• /
• pp.469-477
• /
• 2009

Purpose: This study was performed to evaluate the effect of various graft materials used with a titanium cap on the ability of new bone formation in the rabbit calvarium. Materials and Methods: A total of 32 sites of artificial bony defects were prepared on the calvaria of sixteen rabbits by using a trephine bur 8 mm in diameter. Each rabbit had two defect sites. 0.2 mm deep grooves were formed on the calvaria of sixteen rabbits by using a trephine bur 8 mm in diameter for the fixation of a titanium cap. The treatments were performed respectively as follows: without any graft for the control group (n=8), autogenous iliac bone graft for experimental group 1 (n=8), alloplastic bone graft ($SynthoGraft^{(R)}$, USA) for experimental group 2 (n=8), and xenogenic bone graft ($NuOss^{(R)}$, USA) for experimental group 3 (n=8). After the treatments, a titanium cap (8 mm in diameter, 4 mm high, and 0.2 mm thick) was fixed into the groove. At the third and sixth postoperative weeks, rabbits in each group were sacrificed for histological analysis. Results: 1. In gross examination, the surgical sites showed no signs of inflammation or wound dehiscence, and semicircular-shaped bone remodeling was shown both in the experimental and control groups. 2. In histological analysis, the control group at the third week showed bone remodeling along the inner surface of the cap and at the contact region of the calvarium without any specific infiltration of inflammation tissue. Also, there was no soft tissue infiltration. Bone remodeling was observed around the grafted bone and along the inner surface of the titanium cap in experimental group 1, 2, and 3. 3. Histologically, all groups at the sixth week showed the increased area of bone remodeling and maturation compared to those at the third week. In experimental group 2, the grafted bone was partially absorbed by multi nucleated giant cells and new bone was formed by osteoblasts. In group 3, however, resorption of the grafted bone was not observed. 4. Autogenous bone at the third and sixth week showed the most powerful ability of new bone formation. The size of newly formed bone was in decreasing order by autogenous, alloplastic, and heterogenous bone graft. There was no statistically significant difference among autogenous, alloplastic, and heterogenous bones(p>0.05). Summary: This result suggests that autogenous bone is the best choice for new bone formation, but when autogenous bone graft is in limited availability, alloplastic and xenogenic bone graft also can be an alternative bone graft material to use with a suitably guided membrane.

• The korean journal of orthodontics
• /
• v.28 no.2 s.67
• /
• pp.329-341
• /
• 1998

Sterilization has received much attention in orthodontic practices over the past several years. The present study was undertaken to investigate the effects of sterilization on the physical properties of orthodontic pliers-AEZ, Unitek, and Dentronix ligature cutters. This study was designed to examine the tips of ligature cutters before and after 200 and 400 sterilization cycles using the Bowmar RHT-1000, the Dentronix DDS-5000, and the Eschmann SES-2000. The tip surface and the fracture surface were observed with a scanning electron microscope. The microstructure was observed with an optical microscope. The hardness test was carried out with the mic개-Vickers hardness tester and the Rockwell C Scale hardness tester. The chemical composition was analyzed by energy dispersive X-ray spectrometer. The results of this study were as follows : 1. The number and the size of corrosion products on the tip surface and the proportion of cleavage planes in fractured specimen increased, but the hardness of the tip decreased in proportion to sterilization cycles. From these observations, it was considered that mechanical properities decreased in proportion to sterilization cycles. 2. The number and the size of chromium carbides increased in proportion to sterilization cycles. Coarse microstructure decreased mechanical properities. 3. The AEZ and Unitek ligature cutters were Fe-Cr stainless steels, but the Dentronix ligature cutter was Co-Cr alloy. There were many differences among manufactures, but the chemical composition was .not changed after sterilization cycles. 4. The tip edge of ligature cutter used in a clinic revealed microcracks with the SEM observation. Clinical experience confirmed that ligature cutters were gradually degraded by sterilization.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.58-68
• /
• 2006

This work proposes a 10b 250MS/s $1.8mm^2$ 85mW 0.13um CMOS A/D Converter (ADC) for high-performance integrated systems such as next-generation DTV and WLAN simultaneously requiring low voltage, low power, and small area at high speed. The proposed 3-stage pipeline ADC minimizes chip area and power dissipation at the target resolution and sampling rate. The input SHA maintains 10b resolution with either gate-bootstrapped sampling switches or nominal CMOS sampling switches. The SHA and two MDACs based on a conventional 2-stage amplifier employ optimized trans-conductance ratios of two amplifier stages to achieve the required DC gain, bandwidth, and phase margin. The proposed signal insensitive 3-D fully symmetric capacitor layout reduces the device mismatch of two MDACs. The low-noise on-chip current and voltage references can choose optional off-chip voltage references. The prototype ADC is implemented in a 0.13um 1P8M CMOS process. The measured DNL and INL are within 0.24LSB and 0.35LSB while the ADC shows a maximum SNDR of 54dB and 48dB and a maximum SFDR of 67dB and 61dB at 200MS/s and 250MS/s, respectively. The ADC with an active die area of $1.8mm^2$ consumes 85mW at 250MS/s at a 1.2V supply.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.1
• /
• pp.1-7
• /
• 2011

Purpose: The purpose of this study was to investigate the cutting efficiency of coarse grit diamond burs with air-turbine handpiece on natural tooth. Materials and methods: Four groups of coarse grit diamond bur were selected: Komet (A), Shofu (B), Premier (C), and Mani (D). The extracted maxillary central incisors were used, and ten cuts were made on each specimen, using the rotary diamond burs. The surface of each bur was measured at the upper, middle, and bottom of the bur with confocal laser scanning microscope and imaged with SEM. The data were analyzed with one-way ANOVA and t-test at the significance level of 0.05. Results: The surface roughness was measured. At the A diamond bur, the Sa values were $52.93\;{\mu}m$, $48.32\;{\mu}m$, $46.79\;{\mu}m$, $45.06\;{\mu}m$, and $43.43\;{\mu}m$ for control, test 1, 2, 3, and 4 respectively. The Sa values were $50.68\;{\mu}m$, $45.62\;{\mu}m$, $44.41\;{\mu}m$, $44.10\;{\mu}m$, and $42.46\;{\mu}m$ for B diamond bur, $58.02\;{\mu}m$, $55.53\;{\mu}m$, $52.22\;{\mu}m$, $48.26\;{\mu}m$, and $45.36\;{\mu}m$ for C diamond bur, and $50.11\;{\mu}m$, $46.73\;{\mu}m$, $45.46\;{\mu}m$, $42.58\;{\mu}m$, and $41.80\;{\mu}m$ for D diamond bur. Surface roughness after each bur use showed significant changes, but no significant difference was found in surface roughness change between bur systems. Conclusions: Surface roughness in the same bur system showed significant differences after each tooth preparation. However no statistically significant differences were found in surface roughness between bur systems. The SEM images between control and test 4 showed the abraded particles.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.1
• /
• pp.15-24
• /
• 2003

The purpose of this study is to investigate the sterilization effect of Er:YAG laser against the intraoral acid producing bacterium, S. mutans, by irradiating the culture solution containing S. mutans KCTC 3065 with Er:YAG laser having a $650{\mu}m$ diameter beam through the non-contact method. We obtained the following results after examining the temperature changes of the culture solution, numbers of bacterial colonies, and acid-producing ability and attaching ability on teeth by measuring the amount of extracellular polysaccharide produced by S. mutans. The number of bacterial colony was decreased in $10{\mu}l$ culture solution irradiated with laser in overall compared to the control solution. The number decreased as the irradiation intensity and pulse repetition rate were larger and as the exposure time was increased. However, it did not change significantly in $100{\mu}l$ culture solution compared to the control solution. Although the acid-producing ability of S. mutans was inhibited for a certain duration after laser irradiation in 10r1 bacterial culture solution, it did not change in $100{\mu}m$ solution compared with the control solution. The amount of extracellular polysaccharide synthesized by S. mutans was partially decreased through laser irradiation in $10{\mu}m$ culture solution but did not change in $100{\mu}m$ culture solution. Based on these findings, we concluded that Er:YAG laser has an sterilization effect on S. mutans in which we presume that the mechanism is through the heat effect rather than the mechanical effect from development of ultrasound.

• Journal of Mushroom
• /
• v.13 no.3
• /
• pp.212-216
• /
• 2015

A new commercial strain "Mongdol" of oyster mushroom was developed by hyphal anastomosis. It was improved with hybridization between monokaryotic strain derived from Pleurotus ostreatus ASI 0627 and dikaryotic strain derived from P. ostreatus ASI 2929. The optimum temperature of mycelial growth and fruiting body development were $25{\sim}30^{\circ}C$ and $12{\sim}18^{\circ}C$, respectively. When two different media including PDA (potato dextrose agar medium) and MCM (mushroom complete medium) were compared, the mycelial growth of this mushroom was faster in MCM than in PDA. Similar result was observed with the control strain P. ostreatus ASI 2504. Analysis of the genetic characteristics of the new cultivar "Mongdol" showed a different DNA profile as that of the control strain ASI 2504, when RAPD (Random Amplified Polymorphic DNA) primer URP3 and URP6 were used. Fruiting body production per bottle was about 106 g using demonstration farms. The color of pileus was blackish gray and the stipe was long. Therefore, we expect that this new strain "Mongdol" will satisfy the consumer's demand for high quality mushrooms.

• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.324-332
• /
• 2017

The comparative experiments were conducted for single span greenhouses where cucumbers were cultivated to analyze the effect of heating between a carbon fiber electric heating element heater and an oil hot air heater in terms of the inside climate, energy consumption and plant growth. In order to analyze the effect of heating capacity, 6, 9, and 16 kW of electric powers were supplied to the electric heating element for same setting temperature of 15?. As a result, as the heating capacity increased, the number of ON-OFF cycles of the electric heating element and the temperature inside the greenhouse increased proportionally. In the comparison of two heaters, it was shown that the temperature and relative humidity distributions of the electric heating element installed greenhouse was much uniform than those of the oil hot air heater installed greenhouse. The heating energy consumptions during the heating period of 79 days were 867L for the oil hot air heater and 8,959 kWh for the electric heating element heater, and the heating costs were 607 and 403 thousand won respectively. In the electric heating element installed greenhouse, the cucumber growth was slightly better and the yield was 4.3% higher than those of the oil hot air heater installed greenhouse, but there were no statically significant difference in the cucumber growth and yield between greenhouses.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2012.05a
• /
• pp.10-10
• /
• 2012

독일의 와인 생산지는 라인 강과 그의 지류를 따라 대개 서남쪽에 산재해 있다. 독일은 102,000 헥타르(2005년, 전 세계 포도밭의 1.3%)의 포도밭을 가지고 있으며, 매년 약 915만 3천 헥토리터(2005년, 전 세계 생산량의 3.24%)의 와인을 생산하고 있다. 이는 독일이 포도 재배면적으로는 세계 13번째 국가이며, 와인 생산량으로는 세계 8위를 나타내는 수치이다. 독일은 원래 화이트와인의 나라였으나, 레드와인의 생산이 1990년대와 2000년대에 급속히 증가하였다. 현재(2011년) 독일 포도밭의 64%가 화이트와인을 위해 경작되고 있으며, 36%가 레드와인을 위해 경작되고 있다. 화이트와인을 위한 주요품종이 리슬링(Riesling, 22%), 레드와인을 위한 주요품종은 쉬페트부르군더(Sp$\ddot{a}$tburgunder, Pinot Noir, 11.5%)로 알려져 있다. 독일은 다양한 형태의 와인을 생산한다. 드라이(dry), 세미스위트(semi-sweet)와 스위트한 화이트와인들(sweet white wines), 로제와인, 레드와인과 발포성 와인인 젝트(Sekt, 독일형 샴페인)이다. 독일 포도밭의 위치가 북쪽이므로, 독일은 유럽의 다른 나라와는 전혀 다른 다수의 훌륭한 품질의 와인을 생산한다. 오늘날 독일의 포도재배는 1세기에서 4세기쯤의 고대 로마시대부터 시작된 것으로 알려져 있다. 카롤루스 대제(Carolus Magnus, 747/748-814)의 시대 전에 독일의 포도재배는 비록 독점적이지는 않았으나 라인의 서부지역에서 주로 경작되었다. 카롤루스 대제는 포도재배를 라인가우에 보급한 것으로 추측되고 있다. 1787년에 아우스레제(Auslese)로 시작한 수확된 성숙도에 기반을 둔 와인의 후속 분류는 품질보증 고급와인 체계의 초석을 놓았다. 대부분의 현재 독일 와인법은 1971년에 도입되었으며, 그 이후 사용되어온 바와 같이 품질보증 고급와인의 이름이 정의되었다. 독일와인 지역은 세계에서 가장 북쪽인 북위 $50^{\circ}$도 부근에 위치한다. 북쪽의 기후이기 때문에 적합한 포도 품종에 대한 연구가 되어왔으며, 가이젠하임 포도 육종 연구소에서 뮐러-투르가우와 같은 많은 교배종이 개발되어 왔다. 최근에 지역 및 국제 수요가 높은 품질의 와인을 요구함으로서 리슬링의 재배가 증가해 왔다. 와인은 모두 자주 산맥으로 보호된 주로 라인 강과 그 지류인 강 주변에서 생산된다. 강들은 온도를 조절하는 충분한 미기후 효과를 갖는다. 토양은 태양의 열을 흡수해서 그것을 밤에 보존하는 점판암이다. 독일 와인산업은 다수의 작은 포도밭 소유자로 이루어져 있다. 1989/90년에 서부독일에 76,683개의 크고 작은 기업이 있었으나, 1999년에는 68,598로 줄어들었으며, 2010년도의 조사에 의하면 48,009개의 기업이 조업 중인 것으로 나타났다. 그들 자신의 와인을 팔지 않거나 상업화할 수 없는 더 작은 포도 재배자는 여러 가지 선택이 가능하다. 즉 포도를 팔거나, 와인-생산 조합의 기본 와인으로서 그것을 사용하는 와인제조 회사에게 대량으로 와인을 판다. 정말로 좋은 장소에 포도밭을 가진 사람들도 포도밭을 전체적으로 경작하기를 원하는 대량 생산자들에게 빌려주는 선택을 할 수 있다. 2010년에 각각 5ha 이상을 지닌 5,974개의 포도밭 소유자가 독일 전 포도밭 면적의 70.3%를 소유하며, 생업 와인생산자와 기업이 여기에 속한다. 그러나 그들 자신의 포도밭을 지닌 진정으로 큰 와인 양조장은 독일에서는 희귀하다. 2007년의 고에 묘 와인가이드(Gault & Millau Weinguide)에 의한 독일에서 가장 좋은 것으로 생각되는 10개의 와인 양조장 중에 10개가 10.2-19ha의 포도밭, 하나(Weingut Robert Weil, 산토리 소유)가 75ha의 포도밭을 소유하였다. 이것은 대부분의 높은 순위의 독일 와인 양조장 각각 매년 약 100,000병의 와인을 생산한다는 것을 의미한다. 가장 큰 포도밭 소유자는 헤센의 주 와인 양조장(Hessische Staatsweing$\ddot{u}$ter)으로 헤센의 연방주에 의한 소유이며, 200ha의 포도밭을 지니고, 3개의 별도 와인 양조장에서 제조된다. 가장 큰 개인이 소유한 와인 양조장은 팔츠에 있는 85.5ha를 지닌 독토르 뷔르클린-볼프(Weingut Dr. B$\ddot{u}$rklin-Wolf)이다. 2009년도의 독일에서 총 와인 생산량은 910만 헥토리터였으며, 그중에 206만 8천 헥토리터를 수출하였다. 그러나 그해에 총 수입와인 양은 1,266만2천 헥토리터였다.