• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.112-119
• /
• 2013

The thermal performance for test system with evacuated tubular solar collector is experimentally investigated to obtain the basis data for developing new type solar collector. For this purpose, the test system was designed using CATIA and then after being manufactured, the system was tested using evacuated tubular solar collector. Numerical analysis, furthermore, was performed using ANSYS Fluent V.13 for glass evacuated tubular solar collector. The results showed that as setting temperature difference(${\Delta}T$) of system was increased, total operating(working) time was almost same in all cases, even though operating count was decreased. The results of numerical analysis showed that as temperature of solar absorber in glass evacuated tubular solar collector was high, the drop-rate of temperature of center part was increased.

• Journal of the Korea Society for Simulation
• /
• v.20 no.4
• /
• pp.67-79
• /
• 2011

The statistical process control (SPC) assumes that observations follow the particular statistical distribution and they are independent to each other. However, the time-series data do not always follow the particular distribution, and most of cases are autocorrelated, therefore, it has limit to adopt the general SPC in tim series process. In this study, we propose a MPBC (Model Parameter Based Control-chart) method for fault detection in time-series processes. The MPBC builds up the process as a time-series model, and it can determine the faults by detecting changes parameters in the model. The process we analyze in the study assumes that the data follow the ARMA (p,q) model. The MPBC estimates model parameters using RLS (Recursive Least Square), and $K^2$-control chart is used for detecting out-of control process. The results of simulations support the idea that our proposed method performs better in time-series process.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.4
• /
• pp.316-323
• /
• 2013

The use of artificial roughness in various forms of shapes and sizes is the most common and effective way to improve the performance of a flat-plate solar collector. In the present study, numerical analysis on heat transfer and pressure drop was performed in a rectangular channel with various rib arrays. The uniform heat flux is applied to the channel from the upper side. The forms of ribs considered in this study were rib $90^{\circ}$, groove $90^{\circ}$, groove $60^{\circ}$, baffle $90^{\circ}$, baffle $60^{\circ}$, wave $90^{\circ}$ and wave $60^{\circ}$. Air is the working fluid, and the Reynolds number ranges from 3200 to 17800. Nusselt number and friction factor were investigated to predict the performance of the system with various type of ribs. The average Nusselt number and pressure drop were increased with the increase of velocity in all types of ribs. The highest heat transfer and pressure drop occurred for the baffle $90^{\circ}$, but highest performance factor considering heat transfer and pressure drop together occurred for the groove $60^{\circ}$. Therefore, heat transfer and pressure drop should be considered together when a flat plate solar collector is designed.

• Journal of Korean Society of Transportation
• /
• v.35 no.6
• /
• pp.469-480
• /
• 2017

On April 1, 2004, KTX (Korea Train eXpress), the first HSR (High-Speed Rail) in Korea, was introduced to Gyeongbu Line. The introduction of the KTX service led to a change in the number of passengers for Gyeongbu Line. Previous studies have analyzed the pre and post-event changes of the intervening events by either simple statistics or intervention ARIMA analysis. However, the intervention ARIMA model has a limitation that several assumptions such as the occurrence time and the type of intervention events are necessary. To this end, this study analyzed the effects of intervention event on the number of passengers using the Gyeongbu line based on a time series outlier detection technique which can overcome limitations in the previous studies. The time series outlier detection technique can analyze the time, effect type and size of an intervention event without the assumption of the time and effect type of the intervention event. The data were collected from the Korea Transport Database (KTDB) for twelve years from 2003 to 2014 (144 months). The analysis results showed that the size of the influence type in the same intervention events was different across the major city routes, and the intervention event which could not be found by previous study methods was also found.

• Elastomers and Composites
• /
• v.42 no.1
• /
• pp.47-54
• /
• 2007

Reaction kinetics of polyurethane elastomers (PU) were studied using dynamic DSC and TGA for three PU samples of general purpose (Sample A), high temperature cross-likable CASE purpose with MOCA (Sample B), and RT cross-likable CASE purpose grade (Sample C). From DSC results, sample with MOCA(Sample B) showed lower shift of peak temperature, while showing broader thermograms than those of general purpose grade (Sample A). On the other hand, RT cross-linkable PU grade (Sample C) showed an interesting double mode reaction patterns, i.e., a lower temperature reaction at about $70\;^{\circ}C$, and a higher temperature reaction in the range of $140{\sim}170\;^{\circ}C$, indicating that it requires 2-step reaction process in order to complete the reaction. Once the cross-linking reaction completed, however, TGA results showed that all the samples would be considered to have similar chemical structures, showing similar decomposition processes. Sample C, especially, had showed decomposition properties of both Sample A and Sample B. Formation activation energies calculated from Kissinger method showed 10.39, 65.85, 36.52(Low $T_p$) and 18.21(High $T_p$) kcal/mol, while decomposition activation energies were 31.94, 30.84, 24.16 kcal/mol, respectively.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.8
• /
• pp.743-752
• /
• 2013

This is the second paper on the combustion characteristics of landfill gas in a constant volume combustion chamber for a large displacement volume commercial engine, and it discusses the combustion process on the basis of pressure measurements. The results show that the bimodal peak pressure phenomenon, which is caused by the interaction of the heat release and the heat transfer, is more apparent as the mixtures are more favorable to combustion, and the magnitudes of the pressures depend on the unburned fraction. In addition, there exist four main inflection points during heat release owing to variations in the heat transfer area related to flame propagation from the ignition point. Furthermore, the number of inflection points increases as the mixture quality worsens because of the extended burn duration. Consequently, the sophisticated interactions between the heat transfer area changing pattern due to flame propagation and transfer duration might cause very peculiar heat release patterns.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.11
• /
• pp.1125-1130
• /
• 2017

The tooth shapes of serration-type and spline-type reactors are optimized using finite element methods to improve the working life of the part and to lower the stress concentration during rotation resulting from contact with the outer race for a reactor operating with $170^{\circ}C$ transmission oil. The results of thermal expansion analyses between an Al reactor and the steel outer race indicate that, before optimization, the gap between the two parts increases further as the serration-type reactor expands by 0.1 mm and the spline-type one strains by 0.08 mm. Because of shape optimization, a trapezoidal shape is obtained from the initial triangular serration and the rectangular spline of the two reactors. The maximum von Mises stress of the serration-type convertor decreased by 24.5 ％, and by 9.3 ％ for the spline-type convertor. In addition, there is a 13 ％ reduction in the axial thickness, as compared to the initially designed model.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.89-94
• /
• 1993

최근들어 공작기계의 급속한 발전은 절삭작업의 자동화와 무인화를 가능하게 만들었으며 이에따라 절삭가공의 완전한 무인화를 실현하기 이해서는 절삭가공중 발생하는 각종 이상 상태를 in-process로 감시하고 검출하는것이 매우 중요하게 되었다. 이상상태는 절삭공구의 마모나 파손, 채터진동의 발생, 절삭가공에 방해를 주는 절삭칩등을 들수 있으며 이 같은 현상을 검출하기 위한 많은 연구가 활발히 진행되고 있다. 본 연구에서는 내식성,내마모성,내열성 및 기계적 성질이 우수하거나 절삭시 가공 경화성이 크고, 열 전도성이 불량하며, 공구재료와 응착이 쉬어 난색재로 알려지고 톱니형 연속칩이 주로 발생하는 STS304를 선택하여 절삭실험을 하였다. 절삭 조건에 따른 칩 형태를 관찰하여, 절삭조건과 절삭력을 이용하여 칩의 형태를 분류하였으며, 절삭가공중에 칩형태를 검출 할수 있는 가능성에 대하여 연구 하였다.

• Korean Institute of Interior Design Journal
• /
• v.19 no.6
• /
• pp.20-29
• /
• 2010

Art historians and critics have defined the style as common features appeared in a class of objects. Abstract common features from a set of objects have been used as a bench mark for date and location of original works. Commonalities in shapes are identified by relationships as well as physical properties from shape descriptions. This paper will focus on how the computer and human can recognize common shape properties from a class of shape objects to learn design knowledge. Shape representation using schema theory has been explored and possible inductive generalization from shape descriptions has been investigated. Also learned shape knowledge can be used. for new design process as design concept. Several design process such as parametric design, replacement design, analogy design etc. are used for these design processes. Works of Mario Botta and Louis Kahn are analyzed for explicitly clarifying the process from conceptual ideas to final designs. In this paper, theories of computer science, artificial intelligence, cognitive science and linguistics are employed as important bases.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.788-791
• /
• 2007

기존의 미분탄 화력발전을 대체할 수 있는 차기 주자인 가스화복합발전(Integrated Gasification Combined Cycle) 기술은 단순히 열과 전기를 얻는데 그치지 않고 $CO_2$ 저감뿐만 아니라 다양한 형태의 2차 에너지원과 화학원료를 생산할 수 있는 기술이다. 상용화 운전 중인 기존의 IGCC 플랜트는 석탄 공급에 있어 건조된 미분탄(dry pulverized coal) 형태로 공급하는 건식 형태와 석탄슬러리(Coal water slurry)의 액상으로 공급하는 습식 형태로 대별되고 있다. 본 연구에서는 ASPEN plus를 이용하여 상용화 IGCC 플랜트에 대한 기본 모델을 구축하였으며, 산지별로 대상 탄종을 illinois #6(미국), Shenhua(중국), Drayton(호주)로 선정하여 가스화공정에 대한 성능을 해석하였다. 동일한 발전 출력을 얻고자 하였을 때, 석탄의 공급방식에 따라 필요한 석탄과 유틸리티 공급량과 가스화기 전${\cdot}$후단에서의 운전특성과 생성되는 합성가스(syngas) 조성, 냉가스(cold gas) 효율 및 탄소 전환율을 통해 각 case에 대한 플랜트 특성을 비교하였다.