• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5269-5279
• /
• 2014

The cause of defects in the PCB SMT assembly is mostly solder paste deposits. Conventional inspection methods for solder paste deposits suffer from slow speed, low reliability and high cost. Therefore, this paper proposes a method for calculating the height and region of solder paste on PCB using the 3D profiles without measuring the 2D image. The solder paste region is detected by the phase difference in the measurement points and the average phase on the whole surface of PCB. The high reliable height of the solder paste region is computed by the average of the measurement points' phase with repeatability and reliability. The experimental results revealed improvements of 17% in inspection time and 29% repeatability in the height calculation of the solder paste region, resulting in a high speed and less expensive system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.1
• /
• pp.132-137
• /
• 2006

The second part of paper related rotor failure is to evaluate that the axial magnetic flux measurement could be used as a tool of the condition monitoring system for the induction motor and to develope the diagnostic algorithm for the various fault in the electric motors. The magnetic leakage flux signal is captured by the flux coil located at the end of motor without the disturbance of the operation. And the signal is analyzed both time and frequency domain to detect the failure of the motor. Specific signature can be described in tin and frequency domain for each fault of the motor. The experimental test found that the rotor failures - broken rotor bar, broken end ing and rotor eccentricity, could be detected from the spectrum with high resolution. The method of detecting the rotor fault was found by analysing the specific frequency and the sideband of the rotor bar pass frequency from axial leakage flux spectrum. In addition the optimal flux coil and measuring equipment for the axial leakage flux measurement was verified and the diagnostic method for the detection of the rotor related failure was developed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.5
• /
• pp.479-484
• /
• 2009

Nondestructive evaluation(NDE) of ceramic matrix composites is essential for developing reliable ceramics for industrial applications. In the work, C-Scan image analysis has been used to characterize surface crack of SiC ceramics nondestructively. The possibility of detection of surface crack were carried out experimentally by two types of ultrasonic equipment of SDS-win and $\mu$-SDS, and three types of transducer of 25, 50 and 125 MHz. A surface micro-crack of ceramics was not detected by transducer of 25 MHz and 50 MHz. Though the focus method was detected dimly the crack by transducer of 125 MHz, the defocus method could detect the shape of diamond indenter. As a whole, the focus method and the defocus method came to the conclusion that micro crack have a good possibility for detection.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.2
• /
• pp.8-17
• /
• 2012

In this paper we proposes a new framework to obtain 3D shape information of thin film rapidly. The conventional equipments based on reflectometry are not suitable for obtaining 3D overall shape information of thin film rapidly since they require more than 30 minutes to measure the absolute thickness for 170 points. The proposed framework is based on an image analysis method that extracts contour lines from interference fringes images using Canny edge detector. The absolute thickness for contour lines are measured and then a height map from the contour lines is obtained by interpolation using Borgefors distance transformation. The extracted height map is visualized using the DirectX 3D terrain rendering method. The proposed framework can provide 3D overall shape information of thin film in about 5 minutes since relatively small number of real measurement for contour lines is required.

• Journal of KIISE:Software and Applications
• /
• v.34 no.11
• /
• pp.991-1000
• /
• 2007

A new robust approach to detect vehicles in a single frame of traffic scenes is presented. The method is based on the multi-level shadow classification, which has been shown to have the capability of extracting correct shadow shapes regardless of the operating conditions. The rationale of this classification is supported by the fact that shadow regions underneath vehicles usually exhibit darker gray level regardless of the vehicle brightness and illuminating conditions. Classified shadows provide string clues on the presence of vehicles. Unlike other schemes, neither background nor temporal information is utilized; thereby the performance is robust to the abrupt change of weather and the traffic congestion. By a simple evidential reasoning, the shadow evidences are combined with bright evidences to locate correct position of vehicles. Experimental results show the missing rate ranges form 0.9% to 7.2%, while the false alarm rate is below 4% for six traffic scenes sets under different operating conditions. The processing speed for more than 70 frames per second could be obtained for nominal image size, which makes the real-time implementation of measuring the traffic parameters possible.

• Journal of the Korean Magnetics Society
• /
• v.21 no.1
• /
• pp.23-31
• /
• 2011

From among the NDT (nondestructive testing) methods, the MFL (magnetic flux leakage) method is specially suitable for testing pipelines because pipeline has high magnetic permeability. The system applied to MFL method is called the MFL PIG. The previous MFL PIG showed high performance in detecting the metal loss and corrosions. However, MFL PIG is highly unlikely to detect the cracks which occur by exterior-interior pressure difference in pipelines and the shape of crack is long and very narrow. In MFL PIG, the magnetic field is performed axially and there is no changes of cross-sectional area at cracks that the magnetic field passes through. Cracks occur frequently in the pipelines and the risk of the accident from the cracks is higher than that from the metal loss and corrosions. Therefore, the new PIG is needed to be researched and developed for detecting the cracks. The circumferential MFL (CMFL) PIG performs magnetic fields circumferentially and can maximize the magnetic flux leakage at the cracks. In this paper, CMFL PIG is designed and the distribution of the magnetic fields is analyzed by using 3 dimensional nonlinear finite element method (FEM). In CMFL PIG, cracks, standards of NACE, are detectable. To estimate the shape of crack, the leakage of magnetic fields for many kinds of cracks is analyzed and the method is developed by signal processing.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.9
• /
• pp.1175-1182
• /
• 2013

The lock-in mode infrared thermography (IRT) technique has been developed to improve the detection capability of defects in materials with high thermal conductivity, and it has been shown to provide better detection capability than conventional active IRT. Therefore, to investigate the application of this technique to nuclear piping components, lock-in mode IRT tests were conducted on pipe specimens containing simulated wall-thinning defects. Phase images of the wall-thinning defects were obtained from the tests, and they were compared with thermal images obtained from conventional active IRT tests. It showed that the ability to size the detected wall-thinning defects in piping components was improved by using lock-in mode IRT. The improvement was especially apparent when detecting short and narrow defects and defects with slanted edges. However, the detection capability for shallow wall-thinning defects did not improve much when using lock-in mode IRT.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1892-1897
• /
• 2017

This paper proposes a finger counting algorithm for a hand with stuck fingers. The proposed algorithm is based on the fact that straight line type shadows are inevitably generated between fingers. It divides the hand region into the thumb region and the four fingers region for effective shadow detection, and generates an edge image in each region. Projection curves are generated by appling a line detection and a projection technique to each edge image, and the peaks of the curves are detected as candidates for finger shadows. And then peaks due to finger shadows are extracted from them and counted. In the finger counting experiment on hand images expressing various shapes with stuck fingers, the counting success rate is from 83.3% to 100% according to the number of fingers, and 93.1% on the whole. It also shows that if hand images are generated under controlled conditions, the failure cases can be sufficiently improved.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.1037-1043
• /
• 2006

본 논문에서는 유비쿼터스 컴퓨팅 오피스 환경에서 가장 직관적인 HCI 수단인 손 제스처를 사용하여 대형 스크린 상의 응용 프로그램들을 쉽게 제어할 수 있는 시스템을 제안한다. 손 제스처는 손 영역의 정보, 손 중심점의 위치 변화값과 손가락 형상을 이용하여 시스템 제어에 필요한 종류들을 미리 정의해 둔다. 먼저 효율적으로 손 영역 획득을 위해 적외선 카메라를 사용하여 연속된 영상을 획득한다. 획득된 영상 프레임으로부터 구조적 템플레이트 매칭 방법을 사용하여 손의 중심(centroid) 및 손가락끝(fingertip)을 검출한다. 인식과정에서는 양손의 Euclidean distance와 손가락 형상 정보를 이용하여 미리 정의된 제스처와 비교하여 인식을 행한다. 본 논문에서 제안한 비전 기반 hand gesture 제어 시스템은 인간과 컴퓨터의 상호작용을 이해하는데 많은 이점을 제공할 수 있다. 실험 결과를 통해 본 논문에서 제안한 방법의 효율성을 입증한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.2
• /
• pp.35-42
• /
• 2008

This study introduces a robust feature detector for sonar data from a general fixed-type of sonar ring. The detector is composed of a data association filter and a feature extractor. The data association filter removes false returns provided frequently from sonar sensors, and classifies set of data from various objects and robot positions into a group in which all the data are from the same object. The feature extractor calculates the geometries of the feature for the group. We show the possibility of extracting circle feature as well as a line and a point features. The proposed method was applied to a real home environment with a real robot.