• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3A
• /
• pp.457-464
• /
• 2006

Fiber-reinforced composite materials due to their high specific strength, high stiffness and light weight are becoming increasingly used in many engineering industry, especially in the aerospace, marin and civil, etc. In this paper, the buckling load and mode shapes of composite laminates with elliptical cross-section including transverse shear deformations are analyzed. For solving this problems, a versatile flat shell element has been developed by combining a membrane element with drilling degree-of-freedom and a plate bending element. Also, an improved shell element has been established by the combined use of the addition of enhanced assumed strain and the substitute shear strain fields. The combined influence of shell geometry and elliptical cross-sectional parameter, fiber angle, and lay-up on the buckling loads of elliptical cylinder is examined. The critical buckling loads and mode shapes analyzed here may serve as a benchmark for future investigations.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.1
• /
• pp.61-68
• /
• 1986

A set of the shape functions which perfectly satisfy the homogeneous Euler Equations has been proposed for deep beam problems. A finite element beam model using the proposed shape functions has been derived by the Galerkin weighted residual method and used to analyze the numerical examples without reduced shear integration, to show the accuracy and efficiency of the proposed shape functions. The result shows that the finite element model using the proposed shape functions gives very accurate solutions for both static and free vibration analyses. The concept of the proposed shape functions is thought to be applied for the finite element analysis of the elasto-static problems.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.947-954
• /
• 2016

A simplified analysis method is first proposed in order to determine an optimized initial shape of cable-stayed bridges including all unstrained element lengths without using complicated nonlinear FE analysis. The unstrained-length based FE method is then presented using the unstrained lengths by the simplified analysis. To demonstrate validity and accuracy of the proposed method, Incheon bridge model having the fabrication camber is constructed and initial shaping analysis is performed using the presented method and commercial finite element analysis program, MIDAS. Resultantly it is shown that the initial solutions by the proposed algorithm are well optimized and in good agreement with those by MIDAS except for axial displacements of the main member.

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.2
• /
• pp.45-53
• /
• 2012

This paper derives Isogeometric analysis and post-processing method of surface that are generated by NURBS basis function for accurate geometric modeling and structure analysis of free-form. By deforming these parameters that are consisted of control points, knots, polynomial, variable geometric models are derived. The basis function that is used to Isogeometric analysis is same to the basis function of NURBS that is used to generate geometric models. For performing isogeometric analysis, h-p-k refinement is performed without changing of original geometry. To visualize the results of isogeometric analysis that control points' displacements, post-processing method that is the interface method between IGES format and Rhinoceros is derived.

• Composites Research
• /
• v.37 no.4
• /
• pp.301-309
• /
• 2024

Shape memory stents are used for treating vascular conditions like myocardial infarction, angina, and arteriosclerosis through their shape memory behavior. These stents are inserted into blood vessels to expand them, and their performance in terms of flexibility, elastic recovery, and deformation is influenced by their design. In this study, parameters affecting stent structural design were analyzed using Taguchi method, aiming to design structures that consider flexibility, elastic recovery, and deformation. Reflecting the actual conditions faced by stents, ISO standards were incorporated, and finite element analysis was conducted, considering shape memory composite material properties obtained from tensile tests, specifically hyperealstic properties. Ultimately, statistical significance of stent structural design was evaluated through ANOVA (Analysis of Variance), and an improved optimal design model compared to the existing one was proposed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.2 no.3
• /
• pp.152-161
• /
• 1990

In this paper, a hybrid element method(HEM) for the evaluation of the hydrodynamic responses of arbitrary-shaped offshore structures is studied. The hydrodynamic pressure forces are assumed to be inertially dominated, and viscous effects are neglected. The mathematical formulation procedure of the hybrid element method with the analytical eigenseries solution is established systematically. The computer program based on the HEM has been developed, and applied to solving the wave diffraction and radiation problems for arbitrary shaped structures. From comparisons of the results obtained by using the other avaliable solution methods, the method for the evaluation of the hydrodynamic forces using the HEM and the computer program developed here have been proved to be valid.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.4
• /
• pp.38-45
• /
• 1998

It is a tedious and excessive time consuming process to model the local area of crack tip part of structures in calculation of stress intensity factors by FEM. So, in this paper, the hybrid method of FEM and BEM approach was formulated to overcome this type of problems. The multi-domained BEM was adopted to simplify the modelling process of complex geometry and singularity characteristics of crack tip part and the ordinary FEM modelling was used in the rest part. The example calculations shows very good results compared with analytic solutions and other numerical method.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.5
• /
• pp.345-352
• /
• 2014

In this paper, the CAD data for the optimal shape design obtained by isogeometric shape optimization is directly used to fabricate the specimen by using 3D printer for the experimental validation. In a conventional finite element method, the geometric approximation inherent in the mesh leads to the accuracy issue in response analysis and design sensitivity analysis. Furthermore, in the finite element based shape optimization, subsequent communication with CAD description is required in the design optimization process, which results in the loss of optimal design information during the communication. Isogeometric analysis method employs the same NURBS basis functions and control points used in CAD systems, which enables to use exact geometrical properties like normal vector and curvature information in the response analysis and design sensitivity analysis procedure. Also, it vastly simplify the design modification of complex geometries without communicating with the CAD description of geometry during design optimization process. Therefore, the information of optimal design and material volume is exactly reflected to fabricate the specimen for experimental validation. Through the design optimization examples of elasticity problem, it is experimentally shown that the optimal design has higher stiffness than the initial design. Also, the experimental results match very well with the numerical results. Using a non-contact optical 3D deformation measuring system for strain distribution, it is shown that the stress concentration is significantly alleviated in the optimal design compared with the initial design.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.9
• /
• pp.70-70
• /
• 2000

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.546-549
• /
• 2009

자동차 배기계는 제한된 설치 공간으로 인하여 내구성과 연계된 형상을 최적화하여야 한다. 본 연구에서는 자동차 배기계를 구성하고 있는 Flexible Tube(Bellows)의 형상에 따른 응력 변화를 해석하였다. 응력 해석은 유한요소법을 이용하였고, 해석에는 8절점 쉘 요소를 사용하였으며 절점수는 100,000 정도이다. 아울러 Bellows의 변위량이 크게 발생하는 것을 고려하여 기하학적 비선형 해석을 실시하였으며 Bellows의 변형량은 끝단에서 6mm의 변위가 발생하도록 하였다.