• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.2
• /
• pp.149-156
• /
• 2008

In this paper, we propose a method aiming at updating the building information of the digital maps using single high resolution satellite image and digital map. Firstly we produced a digital orthoimage through the automatic co-registration of QuickBird image and 1:1,000 digital map. Secondly we extracted building height information through the template matching of digital map's building vector data and the image's edges obtained by Canny operator. Finally we refined the shape of some buildings by using the result from template matching as the seed polygon of the greedy snake algorithm. In order to evaluate the proposed method's effectiveness, we estimated accuracy of the extracted building information using LiDAR DSM and 1:1,000 digital map. The evaluation results showed the proposed method has a good potential for extraction and revision of building information.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.1
• /
• pp.1-7
• /
• 2011

Terrain, building location and area, and building shape information is in need of implementing 3D map. This paper proposes a method of extracting a building area by an improved semi-automatic snake algorithm. The method consists of 3-stage: pre-processing, initializing control points, and applying an improved snake algorithm. In the first stage, after transforming a satellite image to a gray image and detecting the approximate edge of the gray image, the method combines the gray image and the edge. In the second stage, the user looks for the center point of a building and the system sets the circular or rectangular initial control points by an procedural method. In the third stage, the enhanced snake algorithm extracts the building area. In particular, this paper sets the one tenn of the snake in a new way in order to use the proposed method for specializing building area extraction. Finally, this paper evaluated the performance of the proposed method using sky view satellite image and it showed that the matching percentage to the exact building area is 75%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.3
• /
• pp.521-527
• /
• 2011

POWER PC series are common to the Central Processing Unit for Military Single Board Computer. Among them, G4 group, which contains the 74xx series supported by Freescale manufacturer is mainly used in the Military applications. We focus on the Interface between memory and controller. PCB stacking method, component routing, impedance matching and harsh environment for Military spec are the main constraints for implementation. Also, we developed memory as a module for the consideration of Military environments. The overall type of SBC should be designed by the form of 6U VME or 3U VME. Therefore this study suggests the electrically optimum Interface matching, Artwork technology based on the signal cross over and PCB stacking method on the harsh environment.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.3
• /
• pp.40-51
• /
• 2021

MLS (Mobile Laser Scanning) which is a scanning method done by moving the LiDAR (Light Detection and Ranging) is widely employed to capture indoor PCD (Point Cloud Data) for floor plan generation in the AEC (Architecture, Engineering, and Construction) industry. The movement and rotation of LiDAR in the scanning phase cause deformation (i.e. skew) of PCD and impose a significant impact on quality of output. Thus, a de-skewing method is required to increase the accuracy of geometric representation. De-skewing methods which use position and pose information of LiDAR collected by IMU (Inertial Measurement Unit) have been mainly developed to refine the PCD. However, the existing methods have limitations on de-skewing PCD without IMU. In this study, a novel algorithm for de-skewing 2D PCD captured from MLS without IMU is presented. The algorithm de-skews PCD using scan matching between points captured from adjacent scan positions. Based on the comparison of the deskewed floor plan with the benchmark derived from TLS (Terrestrial Laser Scanning), the performance of proposed algorithm is verified by reducing the average mismatched area 49.82%. The result of this study shows that the accurate floor plan is generated by the de-skewing algorithm without IMU.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.4_1
• /
• pp.311-318
• /
• 2014

The data of buildings and structures take over large portions of the mapping database with large numbers. Furthermore, those shapes and attributes of building data continuously change over time. Due to those factors, the efficient methodology of updating database for following the most recent data become necessarily. This study has purposed on extracting needed data, which has been changed, by using overlaying analysis of new and old dataset, during updating processes. Following to procedures, we firstly searched for matching pairs of objects from each dataset, and defined the classification algorithm for building updating cases by comparing; those of shape updating cases are divided into 8 cases, while those of attribute updating cases are divided into 4 cases. Also, two updated dataset are set to be automatically saved. For the study, we selected few guidelines; the layer of digital topographic map 1:5000 for the targeted updating data, the building layer of Korea Address Information System map for the reference data, as well as build-up areas in Gwanak-gu, Seoul for the test area. The result of study updated 82.1% in shape and 34.5% in attribute building objects among all.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.97-104
• /
• 2018

Recently, many studies have examined UAVs (unmanned aerial vehicles), which can replace and supplement existing surveying sensors, systems, and images. This study focused on the use of UAV images and assessed the possibility of utilization in areas where it is difficult to obtain GCPs (ground control points), such as disasters. Therefore, 3D (dimensional) pointcloud data were generated using UAV images and the absolute/relative accuracy of the generated model data using GCPs and without GCPs was assessed. The results showed the 3D shape pointcloud generated by UAV image matching was proven if the relative accuracy was set, regardless of whether GCPs were used or not; the quantitative measurement error rate was within 1%. Even if the absolute accuracy was low, the 3D shape pointcloud that had been post processed quickly was sufficient to be utilized when it is impossible to acquire GCPs or urgent analysis is required. In particular, the results can obtain quantitative measurements and meaningful data, such as the length and area, even in cases with the ground reference point surveying and post-process.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1239-1245
• /
• 2009

Currently, so many approaching methods are being developed to optimize the antenna size. In this paper, We fabricated Inverted-F type antenna attaching lumped components to solve the limitation of antenna size. Through experiments, a basic Inverted-F type antenna was fabricated and satisfied the adequate radiation pattern. After this, we researched the effect of antenna varied by matching circuit consist of chip type resistor, inductor, and capacitor. Using that elements, the antenna was matched at aim frequency. The proposed antenna's size is $7\;{\times}\;24\;mm$ that is very small size against the resonance frequence. Measuring the developed antenna, Its return loss was -18dB. Thus, this antenna can be used for Z-wave systems.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.4 s.310
• /
• pp.30-34
• /
• 2006

To enhance the performance of the piezoelectric transducer for the transit-time type ultrasonic sensors, we investigated and verified the effect of it's size and raw materials using FEM(Finite Element Method) technique. Radiation angle of $25^{\circ}$ could be realized through the control of the matching layer's shape and its raw materials. Based on the results, the flowmeter is fabricated and characterized in real application, which thereby proves good sensitivity of 10 times better than current commercial one.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.540-543
• /
• 2010

POWER PC series are common to the Central Processing Unit for Military Single Board Computer. Among them, G4 group, which contains the 74xx series supported by Freescale manufacturer is mainly used in the Military applications. We focus on the Interface between memory and controller. PCB stacking method, component routing, impedance matching and harsh environment for Military spec are the main constraints for implementation. Also, we developed memory as a module for the consideration of Military environments. The overall type of SBC should be designed by the form of 6U VME or 3U VME.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.42-43
• /
• 2006

LTCC 후막공정에서 일반적으로 사용되고 있는 스크린 프린팅 방법은 낮은 정밀도와 100um 이하의 선폭을 구현하는 데 한계를 보이고 있다. 이에 따라서 보다 미세한 라인을 형성 할 수 있는 반도체 미세라인 공정기술을 후막 공정에 응용한 후막 리소그라피 기술 (thick-film lithography technology)이 전자부품의 소형화에 대한 방안으로 연구 되고 있다. 본 연구에서는 후막 리소그라피 기술에 사용되는 감광성 Silver 페이스트에 영향을 미치는 각기 다른 크기와 형상의 Silver 파우더들과 인쇄 후 표면의 roughness 개선을 위한 여러 종류의 첨가제들을 첨가하여 최적의 조성을 연구 하였으며, 그린시트와 페이스트의 매칭성을 해결하기 위해서 Tg가 다른 글라스 파우더를 첨가하였다. 또한 전면 인쇄 한 후에 건조, 노광, 현상, 적층, 소성 과정을 걸치는 후막 리소그라피 기술을 이용하여 소성 후 20um이하의 선폭을 가지는 내장형 패턴 구현하였으며 투과엑스레이와 O/S 테스트 통하여 우수한 특성을 확인 할 수 있었다.