• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.1
• /
• pp.1-7
• /
• 2013

Structural design and analysis of a coiling arm unloading machine for submarine cable have been originally conducted in this study. Three-dimensional CAD modeling process is practically applied for the structural design in detail. Finite element method(FEM) and multi-body dynamics(MBD) analyses are also used to verify the safety and required motions of the designed coiling arm structure. The effective moving functions of the designed coiling arm with respect to rotational and radial motions are achieved by adopting bearing-roller mechanical parts and hydraulic system. Critical design loading conditions due to its self weight, carrying cables, offshore wind, and hydraulic system over operation conditions are considered for the present structural analyses. In addition, possible inclined ground conditions for the installation of the designed coiling arm are also considered to verify overturn stability. The present hydraulic type coiling arm system is originally designed and developed in this study. The developed coiling arm has been installed at a harbor, successfully tested its operational functions, and finished practical unloading mission of the submarine cable.

• Geophysics and Geophysical Exploration
• /
• v.5 no.4
• /
• pp.236-249
• /
• 2002

We have extended the three-dimensional (3-D) resistivity imaging algorithm to cover the 3-D resistivity tomography problem, where resistivity data are acquired using electrodes installed in several boreholes as well as at the earth surface. The imaging algorithm consists of the 3-D finite element forward modeling and least-squares inversion scheme, where the ACB (Active Constraint Balancing) is adopted to enhance the resolving power of the inversion. Sensitivity analysis with numerical verifications shows that 3-D resistivity tomography is a very appealing method and can be used to get 3-D attitude of subsurface structures with very high-resolution. Moreover, we could accurately handle the topography effect, which could cause artifacts in the resistivity tomography. In the application of 3-D resistivity tomography to the real field data set acquired at the quarry mine, we could derive a very reasonable and accurate image of the subsurface.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.2
• /
• pp.35-45
• /
• 2017

Gravel compaction pile (GCP) is widely used as it increases the bearing capacity of soft ground and reduces the consolidation settlement. Stress concentration ratio for design is dependent on the area replacement, surcharge pressure, depth and penetration rate. However, a range of stress concentration ratio obtained through field, laboratory experiments and numerical analysis is large. But since the main objective of the study is to evaluate the stress concentration ratio and settlement for both area replacement ratio and penetration rate through numerical analysis. Numerical analysis using the finite element program ABAQUS 6.12-4 has been performed for the composite ground with GCP. As a result, the stress concentration ratio at the points except for the point of top is in the range of 1.21-5.36, 1.19-5.45, 2.16-5.60 for 60%, 80% and 100% penetration, respectively. In general, as the penetration rate and area replacement ratio increases, the stress concentration ratio tends to increase.

• 대한공업교육학회지
• /
• v.31 no.2
• /
• pp.1-40
• /
• 2006

The purpose of this study was to development a model of the practical skill instruction of the special subject using the problem-based learning in the technical high schools For the study, various literature researches were reviewed intensively about problem solving process, problem -based learning, and learning principals. The process of the practical skill instruction using the problem-based learning was composed with planning, executing, testing and evaluating. In this practical skill instruction using the problem-based learning, the teacher serves as a coach or guide for students' learning. As a facilitator, the teacher challenges, questions, and stimulates the students in their thinking, problem solving and self-directed study. In this process, students represent problem by thinking aloud, assuming responsibility for their own learning, having self-directed study as well as doing cooperative study, and as a result, education changes move from teacher-centered to student-centered.

• Journal of the Korean Institute of Gas
• /
• v.20 no.1
• /
• pp.13-22
• /
• 2016

This paper presents development of an appropriate procedure and flow chart to analyze shale gas production data obtained from a multi-fractured horizontal well according to flow characteristics in order to calculate an estimated ultimate recovery. Also, the technical considerations were proposed when a rate transient analysis was performed with field production data occurred to only $1^{st}$ transient flow. If production data show the $1^{st}$ transient flow from log-log and square root time plot analysis, production forecasting must be performed by applying different method as before and after of the end of $1^{st}$ linear flow. It is estimated by an area of stimulated reservoir volume which can be calculated from analysis results of micro-seismic data. If there are no bottomhole pressure data or micro-seismic data, an empirical decline curve method can be used to forecast production performance. If production period is relatively short, an accuracy of production data analysis could be improved by analyzing except the early production data, if it is necessary, after evaluating appropriation with near well data. Also, because over- or under-estimation for stimulated reservoir volume could take place according to analysis method or analyzer's own mind, it is necessary to recalculate it with fracture modeling, reservoir simulation and rate transient analysis, if it is necessary, after adequacy evaluation for fracture stage, injection volume of fracture fluid and productivity of producers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.422-429
• /
• 2007

Location awareness is one of the key functionalities to build an U-city. Recently, many of works of the location-aware systems are emerging to commercially apply to on-going large-scale apartment complex based on U-city. As dwellers or cars being attached with active tags are moving in the U-city complex, the active tags periodically broadcast their own identifiers and receivers fixed along the street or in building use those information to calculate location of them. There are several issues to be considered for such an environment. The first is that the number of active tags operating in the same region are large as much as tens of thousands, and the second is that the active tags should be alive without change of batteries more than a year, hence low power consumption is very important. In this paper we propose i) a new architecture for location-aware system considering such issues, ii) technical issues to implement it using active tags, and iii) a mathematical analytic model to investigate overall performance and verify it by comparing with actual experimental results. Through the analysis we can show the theoretical boundary of the lowest packet loss rate and the maximum number of tags with acceptable performance for the systems based on active tags. The results can be applied to practical design of location-based systems of U-City projects.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.413-413
• /
• 2019

하천과 호수에서 남조류의 이상 과잉증식 문제(이하 녹조문제)는 담수생태계의 생물다양성을 감소시키며, 음용수의 이취미 원인물질을 발생시켜 물 이용에 장해가 된다. 또한 독소를 생산하는 유해남조류가 대량 증식할 경우에는 가축이나 인간의 건강에 치명적 해를 끼치기도 한다. 그 동안 국내에서 녹조문제는 댐 저수지와 하구호와 같은 정체수역에서 간헐적으로 문제를 일으켰으나, 4대강사업(2010-2011)으로 16개의 보가 설치된 이후 낙동강, 금강, 영산강 등 대하천에서도 광범위하게 발생되고 있어 중요한 사회적 환경적 이슈로 대두되었다. 한편, 대하천에 설치된 보 구간에서 빈번히 발생하는 녹조현상의 원인에 대해서는 전 지구적 기온상승에 따른 기후변화의 영향이라는 주장과 유역으로부터 영양염류의 과도한 유입, 가뭄에 따른 유량감소, 보 설치에 따른 체류시간 증가 등 다양한 의견이 제시되고 있으나, 대상 유역과 수체의 특성에 따라 녹조 발생의 원인이 상이하거나 또는 다양한 요인이 복합적으로 작용하기 때문에 보편적 해석(universal interpretation)이 어려운 것이 현실이다. 따라서 각 수계별, 보별 녹조현상에 대한 정확한 원인분석과 효과적인 대책 마련을 위해서는 집중된 실험자료와 데이터마이닝 기법에 근거로 한 보다 과학적이고 객관적인 접근이 이루어져야 한다. 본 연구에서는 2012년 보 설치 이후 남조류에 의한 녹조현상이 빈번히 발생하고 있는 낙동강 4개보(강정고령보, 달성보, 합천창녕보, 창녕함안보)를 대상으로 집중적인 현장조사와 실험분석을 수행하고, 수집된 기상, 수문, 수질, 조류 자료에 대해 통계분석과 다양한 데이터모델링 기법을 적용하여 보별 남조류 우점 환경조건과 이를 제어하기 위한 주요 조절변수를 규명하는데 있다. 연구대상 보 별 수질과 식물플랑크톤의 정성 및 정량 실험은 2017년 5월부터 2018년 11월까지 2년에 걸쳐 실시하였으며, 남조류 세포수 밀도와 환경요인과의 상관성 분석을 실시하고, 단계적 다중회귀모델(Step-wise Multiple Linear Regressions, SMLR), 랜덤포레스트(Random Forests, RF) 모델과 재귀적 변수 제거 기법(Recursive Feature Elimination using Random Forest, RFE-RF)을 이용한 변수중요도 평가, 의사결정나무(Decision Tree, DT), 주성분분석(Principal Component Analysis, PCA) 기법 등 다양한 모수적 및 비모수적 데이터마이닝 결과를 바탕으로 각 보별 남 조류 우점 환경요인을 종합적으로 해석하였다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.3
• /
• pp.99-106
• /
• 2019

Technology that cannot be excluded from 4th industry is self-driving sector. The self-driving sector can be seen as a key set of technologies in the fourth industry, especially in the DB sector is getting more and more popular as a business. The DB, which was previously produced and managed in two dimensions, is now evolving into three dimensions. Among the data obtained by Mobile Mapping System () to produce the HD MAP necessary for self-driving, Point Cloud, which is LiDAR data, is used as a DB because it contains accurate location information. However, at present, it is not widely used as a base data for 3D modeling in addition to HD MAP production. In this study, MMS Point Cloud was used to extract facilities around the road and to overlay the location to expand the usability of Point Cloud. Building utility poles and communication poles DB from Point Cloud and comparing road name address base and location, it is believed that the accuracy of the location of the facility DB extracted from Point Cloud is also higher than the basic road name address of the road, It is necessary to study the expansion of the facility field sufficiently.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.42-50
• /
• 2019

As the industry develops in Korea, the use of hazardous chemicals is increasing rapidly and chemical accidents are increasing accordingly. Most of the chemical accidents are caused by leaks of hazardous chemicals, but there are also accidents in which all the substances are released instantaneously due to sudden high temperature/pressure or defection of the storage tanks. This is called catastrophic failure and its frequency is very low, but consequence is very huge when it occurs. In Korea, there were 15 casualties including three deaths due to catastrophic rupture of water tank in 2013, and 64 instances of failures from 1919 to 2004 worldwide. In case of catastrophic failure, it would be able to overflow outside the bund that reduces the evaporation rate and following consequence. This incident is called overtopping. Overseas, some researchers have been studying the amount of external overflow depending on bund conditions in the event of such an accident. Based on the previous research, this study identified overtopping fraction by condition of bund in accordance with Korea Chemicals Controls Act Using CFD simulation. As a result, as the height increases and the distance to the facility decreases while meeting the minimum standard of the bund capacity, the overtopping effect has decreased. In addition, by identifying the effects of overtopping according to atmospheric conditions, types of materials and shapes of bunds, this study proposes the design of the bund considering the effect of overtopping caused by catastrophic failure with different bund conditions.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_2
• /
• pp.1261-1272
• /
• 2018

It is important to measure the Arctic surface air temperature because it plays a key-role in the exchange of energy between the ocean, sea ice, and the atmosphere. Although in-situ observations provide accurate measurements of air temperature, they are spatially limited to show the distribution of Arctic surface air temperature. In this study, we proposed machine learning-based models to estimate the Arctic surface air temperature in summer based on buoy data and Advanced Microwave Scanning Radiometer 2 (AMSR2)satellite data. Two machine learning approaches-random forest (RF) and support vector machine (SVM)-were used to estimate the air temperature twice a day according to AMSR2 observation time. Both RF and SVM showed $R^2$ of 0.84-0.88 and RMSE of $1.31-1.53^{\circ}C$. The results were compared to the surface air temperature and spatial distribution of the ERA-Interim reanalysis data from the European Center for Medium-Range Weather Forecasts (ECMWF). They tended to underestimate the Barents Sea, the Kara Sea, and the Baffin Bay region where no IABP buoy observations exist. This study showed both possibility and limitations of the empirical estimation of Arctic surface temperature using AMSR2 data.