• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.925-928
• /
• 2007

As the field report data does not normalize, ordering organization requires different form every time and field reporters make out form as random, data and report to the ordering organization by different medium such as FAX, e-mail, paper document. Therefore, Field reporters must set and make out same information in required pattern. And ordering organization is being responsible for side works of totalizing and processing the reported data. This research suggests the electronic document unification about monthly construction progress report and construction present condition report system. In addition, it suggests electronically processing function that can handle field report business to unifying electronic documents. As using the result of this research, it will improve the work efficiency and simplify in report business.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2359-2368
• /
• 2013

Cone penetration tests (CPTs) have been increasingly used for site characterizations. However, the site investigations using CPTs are often limited due to soil conditions depending on the cone size and capacity of the CPT system. The small sectional area of a miniature cone improves the applicability of the CPT system due to the increased capacity of the CPT system. A continuous intrusion system using a coiled rod allows fast and cost effective site investigation. In this study, the performance of the continuous intrusion miniature cone penetration test (CIMCPT) system has been evaluated by comparison tests with the standard CPT system at several construction sites in Korea. The results show that the CIMCPT system has a same performance with the CPT system and has advantages on the mobility and applicability. According to field verification tests for scale effect evaluation, the cone tip resistance evaluated by CIMCPT overestimates by 10% comparing to standard CPTs. A crawler mounted with the CIMCPT system has been implemented to improve accessibility to soft ground, and has shown improvement over the truck type CIMCPT system. Therefore, the improved CIMCPT system can be utilized as a cost effective and highly reliable soil investigation methodology to detect the depth of soft ground and to evaluate soil classification.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.216-228
• /
• 2023

The purpose of this study is to apply the handheld Raman spectrometer to identify the coloring materials used in a large Buddhist painting (of Maitreya Buddha) at Janggoksa Temple through cross-validation with HH-XRF. An in situ investigation was performed together with use of a digital microscope and HH-XRF analysis to verify the properties of pigments used in the gwaebul ("large Buddhist painting") via a non-destructive method. However, the identification of coloring materials composed of light elements and mixed or overlaid pigments is difficult using only non-destructive analysis data. Unlike in situ investigation, laboratory analysis often required samples yet the sampling is restricted to a small quantity due to the cultural heritage characteristic. Thus, it is necessary to develop a non-destructive in situ method to supplement the HH-XRF data. The large Buddhist painting at Janggoksa Temple was painted mainly using white, red, yellow, green, and blue colors. The Raman spectroscopy provides molecular information, while XRF spectroscopy provides information about elemental composition of the pigments. Analysis results identified various coloring materials: inorganic pigment, such as lead white, minium, cinnabar, and orpiment, as well as organic pigment such as gamboge and indigo. Therefore, it is possible to obtain more information for the identification of pigments; organic pigment and mixed or overlaid pigments, while at the same time minimizing the collection sample and simplifying the analysis procedure compared to previously used methods. The results of this study will be used as basic data for the analysis of painting cultural heritage through a non-destructive in situ method in the future.

• Journal of Energy Engineering
• /
• v.29 no.1
• /
• pp.25-33
• /
• 2020

Recently, as the mandatory policy of zero energy building is promoted, policies / systems for transition to Zero Energy School are being promoted, but there is no method to systematically analyze and verify the results of energy saving activities for school buildings. For the study of energy performance verification methodology, the current status of related standards was referred to, and the case study of other methodologies was conducted to examine the tools that can analyze the performance in the field. In addition, this study analyzed the current status and characteristics of energy management through domestic school visits. In this paper, we presented various energy saving projects such as air conditioning and heating facilities, lighting, insulation, change operation behavior, and improve operation methods in new and existing school buildings, and M & V methods for verifying energy savings before and after implementation of energy conservation projects.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.2
• /
• pp.114-124
• /
• 2014

For classifying fire damaged areas and analyzing burn severity of two large-fire areas damaged over 100 ha in 2011, three methods were employed utilized supervised classification, unsupervised classification and Normalized Difference Vegetation Index (NDVI). In this paper, the post-fire imageries of SPOT were used to compute the Maximum Likelihood (MLC), Minimum Distance (MIN), ISODATA, K-means, NDVI and to evaluate large-scale patterns of burn severity from 1 m to 5 m spatial resolutions. The result of the accuracy verification on burn severity from satellite images showed that average overall accuracy was 88.38 % and the Kappa coefficient was 0.8147. To compare the accuracy between burn severity and field survey at Uljin and Youngduk, two large fire sites were selected as study areas, and forty-four sampling plots were assigned in each study area for field survey. The burn severities of the study areas were estimated by analyzing burn severity (BS) classes from SPOT images taken one month after the occurrence of the fire. The applicability of composite burn index (CBI) was validated with a correlation analysis between field survey data and burn severity classified by SPOT5, and by their confusion matrix. The result showed that correlation between field survey data and BS by SPOT5 were closely correlated in both Uljin (r = -0.544 and p<0.01) and Youngduk (r = -0.616 and p<0.01). Thus, this result supported that the proposed burn severity analysis is an adequate method to measure burn severity of large fire areas in Korea.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1879-1883
• /
• 2008

본 연구는 자연하천에서의 수온과 유속의 정량적인 관계를 도출하고 이를 검증하기위한 지점별 열화상 촬영 및 분석을 실시하였다. 단계별 연구내용은 다음과 같다. 1)서식처별 수온 모니터링: 수온은 시간 변화에 연동하므로 관측기간 내내 장기간의 모니터링을 실시하였다. 2) 서식처별 유속 관측: 하천에서의 지점별 유속은 강우가 없고 지형변화가 발생하지 않으면 그 차이가 크지 않으므로, 날씨가 좋았던 현장조사 기간 중에는 시간을 고려하지 않은 각 지점별 유속을 취득하였다. 3) 자료 분석: 취득된 수온 자료와 유속 자료를 분석하여 수온과 유속간의 정량적인 상관관계를 규명하였다. 4)분포특성 비교: 대표지점에서의 수치계산 결과와 열화상을 이용하여, 유속과 수온의 면적 분포를 제시하였다. 본 연구에서 제안한 수법을 현업에서 활용하기 위해서는 온도 분포의 주기로 볼 수 있는 1년간의 시기별 조사 및 서식환경이 각각 다른 지점에서의 환경특성을 고려한 분석이 보완되어야만 한다. 하지만 그럼에도 불구하고 적외선 카메라로 촬영한 영상을 이용하여 자연하천에서의 서식지 구분 및 유속 분포를 추정한 본 연구는 향후 그 활용성이 매우 크다고 사료된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.213-213
• /
• 2019

소하천으로 지정된 작은 규모의 하천은 '소하천정비종합계획'에 따라 지정된 빈도 유량 내에서 범람에 의한 침수 피해를 예방하기 위해 주기적으로 정비되고 있다. 소하천으로 지정되지 않은 하천의 경우에는 하천 정비와 관련된 법이 없으므로, 하천 정비 및 하천 관련 자료들이 미흡하다. 경상남도 양산시 물금읍 증산리의 증산 배수펌프장 유역은 2016년 10월 5일 태풍 '차바'의 호우로 인해 그 일원(농경지 및 주거지)이 침수되었다. 증산 배수펌프장 유역에는 소하천으로 등록되지 않은 새도랑천과 새도랑천의 시점부로 합류되는 이름 없는 하천(무명천)이 있고, 해당 하천의 단면 및 침수 모의에 필요한 자료가 없거나 오차가 큰 경우가 있다. 본 연구의 목적은 침수 모의에 필요한 자료들이 부족한 소규모 하천 유역에 대하여 기초 자료를 구축하는 과정과 이를 이용한 침수 모의 결과를 제시하는 것이다. 증산 배수펌프장 유역에 대해 침수 모의 시 필요한 자료는 강우량, 펌프 유량, 펌프장 유수지 제원, 지반고, 하천 단면, 농수로 단면, 인근 도시 지역의 하수관거 제원 등이다. 증산 배수펌프장 유역은 유역 내 하천수의 대부분을 펌프장을 통해 배수가 가능하다. 이와 같은 유역특성을 활용하여 유수지 제원, 하천 단면, 지반고 자료는 유수지 및 하천에 있는 물을 배수해서 무인항공기 측량으로 구축하였다. 증산 배수펌프장 유역의 침수모의는 준2차원 침수 모의가 가능한 CHI 사의 PCSWMM을 이용하였다. 침수 모의를 위한 모형에서 펌프장 모의 시 입력한 수심-양수량 관계 자료는 펌프 가동 일지를 참고하여 시행착오법으로 추정하였다. 침수 모의 결과 평균 침수심은 0.226 m, 최대 침수심은 0.800 m, 침수면적은 $0.562km^2$이다. 태풍 '차바'로 인한 침수 상황에 대하여 탐문조사 결과는 침수심이 약 0.2 ~ 0.3 m이었으며, 모의된 평균 침수심이 조사결과에 부합하는 것으로 판단된다. 증산 펌프장을 통하여 양수된 양에 대한 기록 자료와 모의 결과의 차이는 펌프 모의 운영 종료 시점까지 약 0.5%이다. 본 연구의 검증 자료는 인위적인 펌프 운영 일지 및 침수 상황의 사진으로 검증했다는 한계가 있다. 그러나 무인항공기 측량 및 현장조사, 펌프 운영 일지를 활용한 수심-양수량 관계의 추정으로 생산된 입력자료를 이용하여 모의한 결과는 실제 상황에 부합하는 결과가 도출된 것으로 판단된다.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.4
• /
• pp.33-46
• /
• 2007

HWAW (Harmonic Wavelet Analysis of Wave) method, which is non-destructive method using body and surface waves, has the advantages of obtaining 2D subsurface imaging because it uses a short receiver spacing to obtain the $V_s$ profile of whole depth. Even though the reliability of HWAW method has already been verified by using the numerical simulation in the various layered models, it is very difficult to evaluate the reliability of HWAW in the field because the exact $V_s$ values of the experimental site are unknown. In this study, a model testing site where the material properties and layer information could be controlled was constructed to verify the reliability of HWAW method. The detailed geometry of the testing site was strictly measured by surveying, and 140 vertical and horizontal geophones were established at the boundary of each layer to evaluate the dynamic material properties. Using the interval travel times between the upper and lower geophones, the body wave velocities of each layer were 2 dimensionally obtained as reference data, and comparative study using HWAW method was performed. By comparing 2D Vs profile obtained by HWAW method to the reference data, the reliability of HWAW method was verified.

• Tunnel and Underground Space
• /
• v.24 no.6
• /
• pp.430-439
• /
• 2014

This study developed a simulation program for truck-loader haulage systems in an underground mine. A limestone underground mine in Korea was selected as a study area and investigated to design the simulation algorithm for truck-loader haulage systems. GPSS/H simulation language was utilized to develop the simulation program. Simulations were conducted to analyze the optimal number of haulage trucks dispatched in the 540 ML loading point by using the developed program. The simulation results showed that 8 trucks can maximize the daily production (2,076 ton). The real production (1,850 ton/day) of limestone ores was very similar to the simulated one (1,850.35 ton/day) when considers 7 trucks dispatched in the 540 ML loading point. In addition, average waiting time at loader were similar (waiting time by time study : 1.39 min, simulated waiting time : 1.35 min).

• Journal of Navigation and Port Research
• /
• v.44 no.1
• /
• pp.1-9
• /
• 2020

The purpose of this study was to investigate user satisfaction by identifying the problems and suggesting Improvement plans of interior design in the accommodation area of Ro-Pax ships. First, the characteristics of Ro-P ax ships' accommodation area through previous studies and references, and then a field survey was conducted on seven kinds of Ro-Pax ships. Based on the field study, a questionnaire survey was administered targeting 38 experts involved in passenger ships who indicated that public facilities were the most unsatisfactory of interior design in accommodation areas. As a result of Multiple Linear Regression Analysis, the satisfaction of color showed the highest influence on user satisfaction in accommodation areas, and required the standard of the interior design in accommodation areas. The suggested results of research were the types and layout of public facilities, improvement of color design, provision of interior design standard for accommodation areas, and improvement plans for interior design of Ro-Pax ships.