• Journal of the Korean GEO-environmental Society
• /
• v.18 no.2
• /
• pp.47-51
• /
• 2017

In this study, the optimization algorithm by inverse analysis that is the core of the adaptive management technique was adopted to update the soil engineering properties based on the ground response during the construction. Adaptive management technique is the framework wherein construction and design procedures are adjusted based on observations and measurements made as construction proceeds. To evaluate the performance of the adaptive management technique, the numerical simulation for the triaxial tests and the synthetic deep excavation were conducted with the Hardening Soil model. To effectively conduct the analysis, the effective parameters among the parameters employed in the model were selected based on the composite scaled sensitivity analysis. The results from the undrained triaxial tests performed with soft Chicago clays were used for the parameter calibration. The simulation for the synthetic deep excavation were conducted assuming that the soil engineering parameters obtained from the triaxial simulation represent the actual field condition. These values were used as the reference values. The observation for the synthetic deep excavation simulations was the horizontal displacement of the support wall that has the highest composite scaled sensitivity among the other possible observations. It was found that the horizontal displacement of the support wall with the various initial soil properties were converged to the reference displacement by using the adaptive management technique.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.1
• /
• pp.39-53
• /
• 2019

Bi-directional pile load test (briefly called 'BDH PLT') cannot be performed at loading levels where ultimate bearing capacity could be assessed in field, it is not possible to precisely determine both ultimate load and yield load and under loading. Since the load is transmitted separately to the skin and the end unlike the static pile load test (briefly called 'SPLT') and the direction of loading on the skin is opposite, such methods could have a result different from actual movements of shafts. In this study, three-dimensional finite element method (briefly called '3D FEM') analysis was conducted from results of the BDH PLT, made with barret piles, which were large-diameter cast-in-place concrete piles, and the calculated design constants were applied to the 3D FEM analysis of the SPLT to interpret them numerically and then, actual behaviors of cast-in-place concrete piles were estimated. First, using the results of the BDH PLT with cast-in-place concrete piles, behaviors of the piles made by loading upwards and downwards were analyzed to calculate load-displacement. Second, the design constants, calculated by the 3D FEM analysis and the back analysis, were applied on the 3D FEM analysis for the SPLT, and from these results, behaviors of the SPLT through the BDH PLT was analyzed. Last, the results of the 3D FEM analysis of the SPLT through the BDH PLT was expressed in relationships as {A ratio of bearing capacity of the SPLT and of the BDH PLT (y)} ~ {A ratio of reference displacement and pile circumference (x)}, and they were all classified by reference displacement at 10.0 mm, 15.0 mm, and 25.4 mm.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.509-513
• /
• 2004

현장 균열망의 연결성 및 이에 따른 수리지질학적 특성을 규명하기 위하여, 기존의 통상적인 조사 기법을 한 지역에 집적하여 그 결과에 대한 통합해석을 수행하였다. 본 연구에 적용된 조사 방법은 양수시험, 물리검층, 다중심도 수리화학 분석, 전기비저항 토모그래피, 시추 코어 검층 등의 기련 특성 조사와, 추적자 시험, 다중 심도 수직 유향유속 시험 등 구간별 특성 조사 등이다. 이러한 조사 결과 본 조사 지역 내 균열의 전반적인 분포 특성을 확인할 수 있었으며, 각 균열의 수리적 특성에 대한 기본적 특성을 확인할 수 있었다. 특히 추적자 시험과 유향유속 시험 결과를 통해 각 관정간의 균열을 통한 연결성에 대한 중요한 정보를 도출할 수 있었다. 이러한 성과는 추후 percolation, connectivity 등 모델 개념의 현장화를 위한 연구의 선행 연구로서 그 의미를 자리매김 할 수 있을 것이다.

• The Journal of Engineering Geology
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2005

As a trial to find an efficient technique for determining hydraulic conductivity, a test application of electrical conductivity measurement technique was made using a signal conditioning data acquisition system in borehole. The experiment was made in two test boreholes BM-2 and BM-3 which are located in the Experiment forests of Kangwon National University in Bongmyongri, Chunchon. We obtained series of electric conductivity variation curves after the beginning and completion of saline water injection using these two bore-holes as the pumping well and the observing well alternatively, The analysis of time series electrical conductivity data suggests kinds of valuable information about aquifer properties by holes and depths, and we could confirm the potential of this method as an efficient tool for in situ aquifer test.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.5
• /
• pp.107-114
• /
• 2001

비검측공 시험법을 현장타설말뚝의 건전도 평가 목적으로 적용함에 있어서 시험법의 적용성을 향상시키기 위한 연구가 진행되어 오고 있다. 본 논문에서는 같은 맥락에서 수행되어 온 일련의 해석적 연구 결과 중 시험법의 해상도에 관한 문제와 말뚝 주변 및 선단지반의 강성이 비검측공 시험결과에 미치는 영향에 관해 다루었다. 본 논문에서 수행한 연구결과에 의하면 충격응답기법의 해상도를 평가하기 위해서는 말뚝재료에 대한 지반의 강성비($V_{s}$ /$V_{c}$)와 말뚝의 길이에 대한 직경의 비(L/D)에 의존하는 기존 평가기준에 부가하여 말뚝의 상대적인 체적변화가 필히 고려되어야 한다는 결론을 얻었다. 한편, 말뚝이 수평으로 층이 진 주변 지반을 통과하여 말뚝선단부를 지지하는 지반(선단지반)에 근입되거나 지지되는 경우에 말뚝의 자유단 혹은 고정단 경계 조건은 주변 지반과 선단 지반의 강성비와 선단 지반에 대한 말뚝의 근입깊이에 따라 변화한다는 사실을 규명하였다. 말뚝의 건전도 평가 시에 사용하게 되는 말뚝의 공진주파수가 이들 조건에 따라 변화하므로 결과적으로 시험결과분석에 있어서 이들 영향이 필히 고려되어야 한다는 결론을 얻었다.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.457-462
• /
• 2022

This study is about the case applied of a shallow foundation reinforcement method for a low/mid-rise building where a relatively small load is applied by using a soil stabilized material that utilizes recycled resources. First, laboratory mixing test was conducted for four mixing ratios in order to derive the optimal mixing ratio in the field. Using the derived optimal mixing ratio, it was applied as a shallow foundation for the building in the field. The field application method used a simple process of compaction by the soil mixedure with the original soil and the soil stabilized material in the field. After field application, a plate bearing test was performed on one original ground and two improved ground to confirm the allowable bearing capacity. As a result of checking the bearing capacity, it was found that sufficient bearing capacity was exhibited.Therefore, it was confirmed that it can be used as a shallow foundation for the building.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.8
• /
• pp.5-16
• /
• 2011

The objective of this paper is to assess the potential use of the resilient force of the ground obtained from an accelerometer and to propose a new compaction control process. Several comprehensive field experimental programs were conducted to analyze the correlation of compaction results obtained from an accelerometer and conventional test methods (e.g. the plate load test and field density test). This study focused on comparing the compaction results obtained from an accelerometer with conventional test results statistically. Based on the statistical analysis results, impact and resilient force measured from an accelerometer, mounted on the drum of a roller are very useful factors for continuous compaction control. A new compaction criteria determination process using an accelerometer is also proposed in this study.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.450-457
• /
• 2020

In this study, engineering characteristics such as flowability, segregation and compressive strength by age to derive fast hardening material mixing proportion using excavated soil. And based on optimal mixing proportion, field simulation experiment conducted in laboratory to examine the effectiveness of the method such as kelly ball drop test and soil penetration test for reviewing the following process. As as a result of evaluation, in case of kelly ball drop test and soil penetration test were securing the following process initiation time 3 hours after place CLSM. As results of these assessments, kelly ball drop test and soil penetration test were applicable for revewing following process in construction field besides unconfined compressive strength method.

• Water for future
• /
• v.56 no.9
• /
• pp.47-51
• /
• 2023

2023년 1학기(2023년 3월 2일~2023년 6월 20일) 동안 한국농어촌공사 농어촌연구원 국제융합수리시험센터(안산)에서 현장실습을 한것을 바탕으로 후기를 작성하였다. 현재 농어촌연구원은 농어촌 지역개발, 수자원의 효율적 이용과 관리, 농업 신기술 교육, 스마트팜 기술 보급, 친환경 농업, 남북협력 사업 등 농어업인의 환경 개선과 올바른 정책 방향성을 제시하기 위하여 다양한 분야의 연구를 수행하는 공공기관이다. 이번 현장실습을 경험한 국제융합수리시험센터는 1959년에 국내 최초로 수리모형실험을 시작하였으며, 2018년 대형 실험시설이 추가 증축되어 규모나 시설(장비) 측면에서 국내는 물론 세계 최상위 수준의 인프라를 보유하고 있다. 또한 댐, 하천, 해양, 신재생에너지 등과 관련하여 다수의 실험 실적 보유하고 있어 수 공학 분야의 국가경쟁력 강화에 견인하고 있다. 이번 현장실습은 수리실험 이론 교육, 실험장비 교육, 실험실습, 안전교육으로 구성되어 있다. 교육프로그램(HIGH Center ACE⁺)에 따른 학교에서 배운 전공 이론을 수리실험 분야에 어떻게 적용할 수 있는지 직접 실습하면서 배울 수 있었다. 4개월간 현장실습 교육프로그램에 참여하면서 수리실험 등 수공학 분야의 다양한 경험을 할 수 있었고, 이는 향후 전공과 관련된 직장을 준비하는 데 많은 도움이 될 것으로 생각된다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.3
• /
• pp.87-93
• /
• 2008

The large scale shaker can be employed to measure linear and nonlinear shear moduli of soils in situ as a function of shear strain. The method involves applying dynamic loads on a surface foundation measuring the dynamic response of the soil mass beneath the foundation with embedded instrumentation. This paper focuses on the development of a framework of the inverse analysis for the interpretation of test data to estimate linear and nonlinear shear moduli of soils along with the necessity of the inverse analysis. The suggested framework is based on the nonlinear least squares but it uses two iterative loops to account for the nonlinear behavior of soil that sensors are not located. The validity of the suggested inversion framework is tested through a series of numerical parametric studies. An example use of the suggested inversion framework is also shown. Because the field condition may affect the accuracy of suggested method, it is important to conduct a preliminary inverse analysis to quantify the discrepancy between the estimated modulus and the baseline.