• The Journal of Information Technology
• /
• v.5 no.4
• /
• pp.155-164
• /
• 2002

MPLS is a integrated technology by using routing function and label swapping in the network layer. Based on the previous forwarding equivalence classes, it adds the fixed length label in ingress of the MPLS domain. For the routing, without the packet header information, it uses label for the forwarding decisions. In this paper, traffic engineering requirements in the MPLS internet will be setup. The traffic engineering function have to be performed previously with the network topology. In addition to, we presents the IP network topology and main function with MPLS signaling protocol.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4C
• /
• pp.358-363
• /
• 2010

In IEEE 802.15.4a IR-UWB (Impulse Radio Ultra Wideband) systems, it is crucial to acquire initial carrier/timing synchronization and estimate channel response by exploiting the SYNC symbols embedded in each packet. On the other hand, it is also crucial to detect the SFD pattern followed by the header and data symbols to reliably extract the information contained in the packet. In this paper, we propose a reliable SFD detection scheme utilizing some surplus SYNC symbols in addition to SFD symbols to improve the SFD detection performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.1
• /
• pp.117-124
• /
• 1998

As window sized increases, the throughput input-buffered packet switch with a window scheme improves on random traffic condition. However, the improvement diminishes quickly under bursty traffic. In this paper, we propose Burst Head Addressable FIFO mechanism and memory structure having search capability in unit of burst header to compensate the sensitiveness of the windowed scheme to bursty traffic. The performance of a input-buffered switch using the proposed Burst Header Addressable FIFO input buffer was analyzed using computer simulations. The maximum throughput of the conventional FIFO scheme approaches an asymptotic value 0.5 as mean burst length increases. The maximum throughput of the proposed scheme is greater than that of the conventional scheme for any mean burst length and window size.

• Membrane Journal
• /
• v.28 no.2
• /
• pp.83-89
• /
• 2018

Hydrophobic porous PVDF hollow fiber membranes for Membrane Distillation (MD) were fabricated by a combination of thermally induced phase separation (TIPS) and stretching. The purpose of this study is to investigate the shape and operating conditions of the module and the effect of piping size on parallel connection. In the optimization experiment of the vacuum membrane distillation module, the flux decreased as the packing density and length of the membrane in the module increased. When the module was connected vertically, it was confirmed that the nearest to the inlet of the vacuum port was the highest flux. In selecting the size of the header pipe of the module, it was confirmed that the maximum flux is shown when the inner diameter area of the hollow fiber membrane and the inner diameter area of the header pipe are the same. Also, it is necessary to find the optimal linear velocity because the higher the linear velocity in the module, the higher the flux, but the pressure acting on the module also increases proportionally.

• The KIPS Transactions:PartC
• /
• v.13C no.1 s.104
• /
• pp.83-94
• /
• 2006

This paper describes ATM cell encipherment method using Rijndael Algorithm adopted as an AES(Advanced Encryption Standard) by NIST in 2001. ISO 9160 describes the requirement of physical layer data processing in encryption/decryption. For the description of ATM cell encipherment method, we implemented ATM data encipherment equipment which satisfies the requirements of ISO 9160, and verified the encipherment/decipherment processing at ATM STM-1 rate(155.52Mbps). The DES algorithm can process data in the block size of 64 bits and its key length is 64 bits, but the Rijndael algorithm can process data in the block size of 128 bits and the key length of 128, 192, or 256 bits selectively. So it is more flexible in high bit rate data processing and stronger in encription strength than DES. For tile real time encryption of high bit rate data stream. Rijndael algorithm was implemented in FPGA in this experiment. The boundary of serial UNI cell was detected by the CRC method, and in the case of user data cell the payload of 48 octets (384 bits) is converted in parallel and transferred to 3 Rijndael encipherment module in the block size of 128 bits individually. After completion of encryption, the header stored in buffer is attached to the enciphered payload and retransmitted in the format of cell. At the receiving end, the boundary of ceil is detected by the CRC method and the payload type is decided. n the payload type is the user data cell, the payload of the cell is transferred to the 3-Rijndael decryption module in the block sire of 128 bits for decryption of data. And in the case of maintenance cell, the payload is extracted without decryption processing.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.1
• /
• pp.73-79
• /
• 2009

In this paper, the structural analysis and optimization of the door supporting rail structure in the header box located at the top of the aluminum passenger safety door(PSD) at the subway station, which opens and closes regularly, is performed. In case the simple fixed boundary condition is used for the bolt fixture on the supporting rail where the glass door is moving, excessive stresses are obtained. Therefore, more realistic finite element modeling of the bolts is used at the bolt fixture in the whole structure in order to obtain the more physically acceptable FEM results. As a result, fatigue life of twenty years of the structure is obtained to satisfy the design object. Also the optimal design of cross section of the rail part is performed using the response surface method and 15% of weight of the supporting rail part on the door is reduced.

• The Journal of the Korea Contents Association
• /
• v.10 no.9
• /
• pp.36-44
• /
• 2010

In this paper, we propose video quality control system(VQCS) which can control video service quality through the monitoring of end-to-end available bandwidth for video streaming service like IPTV in NGN convergence network. Various multimedia services such as video, voice and gaming service can be provided by IPTV, and these services require large amounts of bandwidth. At this time, video quality degradation like video jerkiness, block distortion and blurring is caused when network available bandwidth is insufficient. Available bandwidth monitoring method is need to stably control video streaming quality. So, we periodically calculate the amount of the packets in link and measure available bandwidth by using total length field in IP header at terminal. Scalability extractor in network selects suitable video streaming data rate based on available bandwidth and transports video streaming with adaptive data rate to prevent video quality deterioration.