• Fire Science and Engineering
• /
• v.33 no.4
• /
• pp.16-27
• /
• 2019

A burning test was conducted on the smoke and combustion gases generated from cypress wood treated with sodium silicate, 3-aminopropyltrimethoxysilane sol, 3-(2-aminoethylamino)propylmethyldimethoxysilane sol, and 3-(2-aminoethylamino) propyltrimethoxysilane sol. The silicone compound sol was applied to each of the cypress wood specimens three times with a brush. The smoke and combustion generation gas were analyzed using a cone calorimeter (ISO 5660-1) and the smoke was also evaluated by applying new smoke risk assessment method. The smoke performance index (SPI) of the cypress treated with silicone compound increased 1.66 to 8.42 times and the smoke growth index (SGI) was 11.8 to 88.2%, respectively. The smoke intensity (SI) is expected to be 1.0~50.5% lower than that of the base specimens, resulting in lower smoke and fire hazards. The third maximum carbon monoxide (CO_peak) concentration of the specimens treated with silicone compounds was 22.5~33.3% lower than that of the base specimens. On the other hand, it produced potentially fatal toxicity that was 1.48~1.72 times higher than the US Occupational Safety and Health Administration (OSHA) acceptance standard (PEL). Cypress wood itself produced a high carbon monoxide concentration, but the silicon compound played a role in reducing this level.

• Land and Housing Review
• /
• v.4 no.1
• /
• pp.107-117
• /
• 2013

This study aimed to assess the rental housing ABS in Korea, and to suggest ways of improving the structure of existing rental housing ABS. Thus, the three major assessment for existing public rental housing ABS case can be summarized as follows : First, when viewed in terms of the accounting treatment, rental housing ABS which use the future receivables as underlying asset, can not enjoy off-balance-sheet effect. Second, when viewed from the point of financing costs, the rental housing ABS interest rate being higher than unsecure bond is very unreasonable nevertheless the ABS being off-balanced. Third, when viewed from the liquidity effect, the originator (LH) use the ABS as a means of diversifying funding in a serious liquidity crisis situation. The Improvement of rental housing ABS based on the evaluation results can be summarized into two broad. First, it is a plan to handle the off-balance-sheet effect in a way of changing the accounting treatment of rental payment. Second, it is a plan to reducing the structuring cost and interest rate in ways of multi-asset securitization structure, self-trust structure, and adopting legal CB structure.

• The Korean Journal of Pesticide Science
• /
• v.8 no.3
• /
• pp.184-188
• /
• 2004

The residue analysis of the insecticide thiodicarb in sweet persimmon was analyzed with a gas chromatograph equipped with nitrogen phosphorus detector(NPD) to evaluate efficacy of analysis method and safety of thiodicarb in persimmon. Minimum detectable amount of methomyl oxime, hydrolysate of thiodicarb, was 0.2 ng and detection limit of thiodicarb was 0.05 ppm. The mean recoveries evaluated from untreated samples spiked at 0.5 ppm and 2.5 ppm were $93.9{\pm}3.9$ and $92.8{\pm}2.0%$, respectively. When thiodicarb was sprayed onto the sweet persimmon two times until 40 and 30 days before harvest, three times until 40, 30 and 21 days before harvest, and four times until 40, 30, 21 and 14 days before harvesting, the mean residual amount in sweet persimmon were $1.50{\pm}0.04$, $1.86{\pm}0.04$ and $2.11{\pm}0.12$ ppm, respectively. It would be safe when thiodicarb 40% WP is treated four times 14 days before harvesting to control fruit moth in sweet persimmon.

• The Korean Journal of Pesticide Science
• /
• v.3 no.2
• /
• pp.37-46
• /
• 1999

In order to ascertain the safety of the systemic insecticide carbofuran-treated crops, samples of garlic, peanut and potato were collected randomly from markets located in the main producing areas and analyzed for the residue of carbofuran and its main metabolite, 3-hydroxycarbofuran. The in vitro metabolism of carbofuran in phosphate buffer extracts of the crops was investigated. Two (M-12 and M-16) out of 20 mature garlic samples contained 0.13 and 0.07 mg/kg of carbohran, respectively, showing a detection incidence of 10%. The residue levels were less than the maximum residue limit (0.5 ppm) set by Korean Food and Drug Administration. Only one sample of mature garlic (M-12) out of 20 contained 0.13 mg/kg of 3-hydroxycarbofuran. The residues of carbofuran and 3-hydroxycarbofuran in the immature garlic, peanut and potato samples were less than the detection limits, 0.02 mg/kg for carbofuran and 0.06 mg/kg for 3-hydroxycarbofuran. The application of carbofuran to the fields of garlic, peanut and potato would be safe, considering that the estimated maximum acceptable daily intake of carbofuran from garlic was 0.0013 mg which is 0.24% of the maximum acceptable daily intake (0.55 mg). Carbofuran was hydrolyzed in vitro mainly to carbofuran phenol (m/z 164) in the respective phosphate buffer extracts of the three crops in contrast to the major oxidative metabolism in situ. The amount of the metabolite increased with the incubation time.

• The Korean Journal of Pesticide Science
• /
• v.15 no.4
• /
• pp.502-506
• /
• 2011

Most countries have the legislation and regulation for POPs control in food. In here, we studied the quantitative analysis of 24 organochlorine POPs (${\alpha}$-HCH 1, ${\beta}$-HCH 2, ${\gamma}$-HCH 3, ${\delta}$-HCH 4, trans-chlrodane 5, 2,4'-DDE 6, ${\alpha}$-endosulfan 7, cis-chlordane 8, 2,4'-DDD 9, endrin 10, ${\beta}$-endosulfan 11, 2,4'-DDT 12, endosulfan sulfate 13, HCB 14, aldrin 15, trans-nonachlor 16, 4,4'-DDE 17, dieldrin 18, 4,4'-DDD 19, cis-nonachlor 20, 4,4'-DDT 21, heptachlor 22, heptachlor epoxide 23 and mirex 24) with GC-ECD. The retention time of analytes were ranged between 19.18 min and 34.69 min, and their peak intervals were over 0.05 min at least. LOQs were ranged 0.003 ~ 0.033 ng/g, and their recovery rates were showed 60.9 ~ 120.8% on the 0.1 ng/g concentration of 24 organochlorine POPs. All tested 30 sundried salts were collected on Korean retailed market, and any analyte was not found in all the samples on LOQ levels.

• The Korean Journal of Pesticide Science
• /
• v.15 no.4
• /
• pp.453-462
• /
• 2011

This study was carried out to survey the residual characteristics of pesticides and assess their safety. Nineteen agricultural commodities, collected from wholesale and traditional markets in Cheongju. Nineteen agricultural commodities including perilla leaves were collected from the markets on October 29th, 2010. Total 240 pesticides which can be analyzed by multiresidue analysis method by GLC and HPLC were monitored and the pesticides detected were confirmed by GC-MSD and LC-MS. Five pesticides, alachlor, bifenthrin, endosulfan, procymidone and triflumizole, were detected from five samples, such as welsh onion, leek and celery in case of wholesale market and perilla leaves and welsh onion in case of traditional market. Detection rate of 13.2% was obtained as a result of pesticide analysis but 2.6% of the pesticides detected exceeded their maximum residue limits. The estimated daily intakes (EDIs) and maximum permissible intakes (MPIs) of the pesticides detected were less than 26% and 0.05% of their acceptable daily intakes (ADIs) respectively, representing that residue levels of the pesticides detected would be safe.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.6
• /
• pp.397-405
• /
• 2012

In this study, performance evaluation of newly developed technology for the economical and safe removal of volatile organic compounds (VOCs) coming out from electronic devices washing operation and offensive odor induction materials was made. Metal oxidization catalyst has shown 50% of removal efficiency at the temperature of $220^{\circ}C$. Composite metal oxidization catalyst applied in this study has shown that the actual catalysis has started at the temperature of $100^{\circ}C$. Comprehensive analysis on the catalyst property using Mn-Cu metal oxidization catalyst in the pilot-scale unit was made and the removal efficiency was variable with temperature and space velocity. Full-scale unit developed based on the pilot-scale unit operation has shown 95% of removal efficiency at the temperature of $160^{\circ}C$. Optimum elimination effective rates for the space velocity was found to be $6,000hr^{-1}$. The most appropriate processing treatment range for the inflow concentration of VOCs was between 200 ppm to 4,000 ppm. Catalyst control temperature showed high destruction efficiency at $150{\sim}200^{\circ}C$ degrees Celsius in 90~99%. External heat source was not necessary due to the self-heat reaction incase of VOCs inflow concentration is more than 1,000 ppm. Equipment and fuel costs compared to the conventional RTO/RCO method can be reduced by 50% and 75% respectively. And it was checked when there was poisoning for sulfide and acid gas.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.7
• /
• pp.938-943
• /
• 2007

This study investigated the hazard analysis of ready-to-eat sandwiches sold in various establishments. Sandwich samples were collected from convenience stores, discount stores, sandwich chain stores, bakery shops, fast-food chain stores, and food service operations located in Daegu and Gyeongbuk. Out of 174 samples, 18 (10.3%) contained coagulase positive staphylococci with counts ranging from 0.30 to 4.08 log CFU/g. There was significant seasonal difference in Staphylococcus aureus isolation; the average count in summer (3.24 log CFU/g) was 3 times higher than that of winter (1.10 log CFU/g) (P<0.001). According to the microbiological guidelines of PHLS for ready-to-eat foods, 95.4% of the samples were acceptable. As a result of enterotoxin producing experimental data ($35^{\circ}C$, pH 5.8, NaCl 0.5%), enterotoxin was not produced in a sandwich until Staphylococcus aureus increased to a level greater than 4.95 log CFU/g. This microbiological hazard analysis data could be applied to future studies on quantitative risk assessment of ready-to-eat foods.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.1 s.47
• /
• pp.41-49
• /
• 2006

Through the 1982 Urahawa-ohi and the 1995 Kobe earthquakes, a number of bridge columns were observed to develop a flexural-shear failure due to the bond slip as a consequence of premature termination of the column longitudinal reinforcement. Because the seismic behavior of RC bridge piers is largely dependent on the performance of the plastic hinge legion of RC bridge piers, it is desirable that the seismic capacity of RC bridge pier is to evaluate as a curvature ductility. The provision for the lap splice of longitudinal steel was not specified in KHBDS(Korea Highway Bridge Design Specification) before the implementation of 1992 seismic design code, but the lap splice of not more than 50%, longitudinal reinforcement was newly allowed in the 2005 version of the KHBDS. The objective of this research is to investigate the distribution and ductility of the curvature of RC bridge column with the lap splice of longitudinal reinforcement in the plastic hinge legion. Six (6) specimens were made in 600 mm diameter with an aspect ratio of 2.5 or 3.5. These piers were cyclically subjected to the quasi-static loads with the uniform axial load of $P=0.1f_{ck}A_g$. According to the slip failure of longitudinal steels of the lap spliced specimen by cyclic loads, the curvatures of the lower and upper parts of the lap spliced region were bigger and smaller than the corresponding paris of the specimen without a lap splice, respectively. Therefore, the damage of the lap spliced test column was concentrated almost on the lower part of the lap spliced region, that appeared io be failed in flexure.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.6
• /
• pp.75-84
• /
• 2010

In current seismic design provisions, a reduced beam section with bolted web (RBS-B) connections is only permitted for intermediate moment frames (IMF). This study evaluated the seismic performance of steel moment resisting frame systems having RBS-B connections designed according to current seismic design provisions. For this purpose, 12 archetypal IMF systems having two different span lengths (9m, 6m) were designed considering two design load levels (SDC $C_{max}$, SDC $C_{min}$). A nonlinear analytical model that can simulate hysteretic behavior of an RBS-B connection was also developed in this study. The procedures specified in ATC 63 are used to conduct a seismic performance evaluation. Moreover, this study conducts the seismic performance evaluation of IMF systems designed according to a new design method proposed by the authors in the previous study. It was observed that several model frames designed according to current seismic design provisions did not provide satisfactory collapse margin ratios (ACMR). This study also showed that the model frames designed according to the new design procedures had a sufficient ACMR.