• The Korean Journal of Pesticide Science
• /
• v.10 no.1
• /
• pp.22-27
• /
• 2006

The aim of this study was to establish the maximum residue limits(MRLs) of fenhexamid, azoxystrobin and cyprodinil pesticides in ginseng products. The pesticides were applied to the cultivation field of ginseng, and they were harvested and processed to make dried ginseng and ginseng extract. The reduction factors of residual pesticides were calculated by determination of the pesticides in each processing stage of ginseng. Reduction factor (dry basis) of pesticides (azoxystrobin, fenhexamid, cyprodinil) were 0.73, 0.96 and 0.24 for dried ginseng and 3.23, 5.74 and 1.20 for ginseng extract. All the residual pesticides were reduced by drying or processing of ginseng, however, fenhexamid did not.

• The Journal of the Korea Contents Association
• /
• v.17 no.12
• /
• pp.180-190
• /
• 2017

This is Kangwon Land casino case due to the damages of betting money, which is likely to affect the contents industry in the future. The reason why the gambler and his family's suit is that why the manager did not control their own access or did not supervise the wagering rules. The provisions of the "Restriction on the amount of money to be paid to the casino" in the Article 14 of the Enforcement Decree of the Act on the Support for the Development of the Abandoned Mine Area are not intended to increase the duty of the casino managers. It is just one of many public regulations imposed. No matter what legislation is made for public interest, it can not be considered equally in the private duty. If so, too much effort will be required to enact or amend the public law and this makes the legislative activity impossible. The Act on the Restriction on Access to the Casino shall be construed accordingly. From the point of view of economic efficiency theory, if we overestimate statutory duties (liability for compensation) excessively, the price goes up on the market, and the volume of transaction decreases drastically. This reduces the economic utility of resources in the society as a whole (total output, foreign currency acquisition amount, etc.).

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.1141-1149
• /
• 2009

In Bone Mineral Density(BMD) measurements, accuracy and precision must be superior in order to know the small changes in bone mineral density and actual biological changes. Therefore the purpose of this study is to increase the reliability of bone mineral density inspection through appropriate management of image quality from machines and inspectors. For the machine management method, the recommended phantom from each bone mineral density machine manufacturer was used to take 10~25 measurements to determine the standard amount and permitted limit. On each inspection day, measurements were taken everyday or at least three times per week to verify the whether or not change existed in the amount of actual bone mineral density. Also evaluations following Shewhart control chart and CUSUM control chart rules were made for the bone mineral density figures from the phantoms used for measurements. Various forms of management became necessary for machine installation and movement. For the management methods of inspectors, evaluation of the measurement precision was conducted by testing the reproducibility of the exact same figures without any real biological changes occurring during reinspection. There were two measurement methods followed: patients were either measured twice with 30 measurements or three times with 15 measurements. An important point to make regarding measurements is that after the first inspection and any other inspection following, the patient was required to come off the inspection table completely and then get back on for any further measurements. With a 95% confidence level, the precision error produced from the measurement bone mineral figures produced a precision error of 2.77 times the minimum of the biological bone mineral density change (Least significant change: LSC). In order to assure reliability in inspection, there needs to be good oversight of machine management and measurer for machine operation and inspection error. Accuracy error in machines needs to be reduced to under 1% for scientific development in bone mineral density machines.

• The Korean Journal of Pesticide Science
• /
• v.14 no.3
• /
• pp.209-218
• /
• 2010

There experiment were carried out to analyze for pesticide residues in 4 kinds of dried fruits collected in northern area of Seoul in 2007~2009. Total of 213 samples were analyzed. According to the results, 20 kinds of residual pesticides were detected. Residual pesticides were detected in 66 samples (31.0%) and 8 samples (3.8%) exceeded maximum residue limits (MRL). Cypermethrin, fenvalerate, endosulfan, chlorpyrifos, bifenthrin were detected frequently. The Pesticide types which were detected in dried furits were revealed in order of pyrethroid > organophosphate > organochloride > dicarboximide. Detection rates of dried fruits were dried chinese matrimony vein (53.0%), dried jujube (34.9%), dried rubi fructus (7.6%) and dried maximowiczia chinensis (4.6%). Based on these results, we investigated the risk assessment from amount of residual pesticide in dried jujube. Range of %ADI were 0.0001~0.0081%, but the value has not effected on human health.

• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.2
• /
• pp.89-96
• /
• 2006

Purpose: To study effectiveness of heterogeneity correction of internal-body inhomogeneities and patient positioning immobilizers in dose calculation, using images obtained from CT-Simulator. Materials and Methods: A water phantom($250{\times}250{\times}250mm^3$) was fabricated and, to simulate various inhomogeneity, 1) bone 2) metal 3) contrast media 4) immobilization devices(Head holder/pillow/Vac-lok) were inserted in it. And then, CT scans were peformed. The CT-images were input to Radiation Treatment Planning System(RTPS) and the MUs, to give 100 cGy at 10 cm depth with isocentric standard setup(Field Size=$10{\times}10cm^2$, SAD=100 cm), were calculated for various energies(4, 6, 10 MV X-ray). The calculated MUs based on various CT-images of inhomogeneities were compared and analyzed. Results: Heterogeneity correction factors were compared for different materials. The correction factors were $2.7{\sim}5.3%$ for bone, $2.7{\sim}3.8%$ for metal materials, $0.9{\sim}2.3%$ for contrast media, $0.9{\sim}2.3%$ for Head-holder, $3.5{\sim}6.9%$ for Head holder+pillow, and $0.9{\sim}1.5%$ for Vac-lok. Conclusion: It is revealed that the heterogeneity correction factor calculated from internal-body inhomogeneities have various values and have no consistency. and with increasing number of beam ports, the differences can be reduced to under 1%, so, it can be disregarded. On the other hand, heterogeneity correction from immobilizers must be regarded enough to minimize inaccuracy of dose calculation.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.2
• /
• pp.7-12
• /
• 2019

Purpose: During the pelvic radiation therapy, it is performed with controlling bladder volume because the range of irradiation is changed depending on the bladder volume. Therefore in this study, we evaluate the accuracy of BVI by tracing the change of bladder volume using ultrasonic pulse diagnosis equipment(BVI 6100, Medical supply Co. LTD) Material and Methods: From January 2017 to September 2018, 19 patients who received pelvic radiation therapy at Pusan National University Hospital were included. To treat the patient, we compared that the bladder volume obtained from the BVI and the bladder volume obtained from the CBCT image then we evaluated for significance. Results: There was a significant correlation of r=0.773, BVI and CBCT in the whole volume section. However, based on the bladder volume in the RTP Image the p value was shown to be 0 at 125~175cc and lower than 0.05 at 175~275cc, And more than 0.05 at 275~375cc. Conclusions: In this study, the patient whose bladder volume is above than 275cc, there is a significance of bladder volume between BVI and CBCT image. However, we could make a decision to be undermined the reliability of BVI measurement in the case of the patient with emptied his urine. Therefore, it is possible to acquire a significant value for 175~275cc patients to use the correction value of BVI and the appropriate tolerance of volume.

• Journal of Korea Soil Environment Society
• /
• v.2 no.1
• /
• pp.13-20
• /
• 1997

Usage and residue of pesticide were sureyed for five years from three golf courses which have morethan eighteenholes inKangwon-do from 1992 to 1996. A total of 186 samples(soils, lawns, effluents) were collected from these courses and residual levels of four kinds of organochlorines and twelve kinds of organophosphorus pesticides in each samples were determined by GC-ECD and GC-NPD. The amount of pesticide used in each golf course was 1, 635.6kg a year on the average, and that of pesticide to the green and the fairway were 33g/$\textrm{m}^2$ and 3g/$\textrm{m}^2$, respectively. The pesticide which was not permitted for the management of golf course was detected in 24 of 186 samples and its detection rate was 12.9%. The average pesticide residue in soils was 0.208 ppm for captan, 0.031 ppm for daconil, respectively. Detection rate of the prohibited pesticides has decreased every year since 1992, and there were no residues all the tested samples in 1996.Based on these results, it might be judged investigation methods of pesticide residue should be changed with current using pesticide from the prohibited pesticides and the criteria of residual pesticides in effluents of golf course also should be established.

• Journal of Korean Society on Water Environment
• /
• v.26 no.3
• /
• pp.377-386
• /
• 2010

Introduction of TBELs into Korean environmental regulatory system for wastewater may require very careful considerations and appropriate modifications of the TBELs applied in US. The Korean regulations for wastewater are based on uniform regulatory criteria for wastewater effluent discharge and are quite different from the individual permit system in US. In addition, the toxic pollutants regulated in Korea are much less than those in US. Therefore, the effects of TBELs application on the pollutants reduction and the economic feasibility should be carefully assessed for different categories of wastewater sources. In this study, the applicability of TBELs for the industrial categories of Korea was discussed. The TBELs were derived for a sample category, the pulp paper paperboard manufacture, based on the previously reported analytical data from 52 facilities of the domestic pulp paper paperboard manufacture in Korea. It was suggested that the BAT effluent limitations were BOD 30 mg/L, $COD_{Mn}$ 40 mg/L, SS 40 mg/L, T-N 30 mg/L and T-P 4 mg/L and that the allowable effluent loads were $0.31{\sim}1.75kgCOD_{Mn}/ton$-products. Due to the limitation of insufficient data, there were difficult to obtain the important factors to derive more systematic and accurate limitation standards for the pollutants such as the 'Long Term Average (LTA)', the 'Product Normalized Discharge Flow (PNDF)', and the 'Variability Factor (VF)'. However, as the first trial of TBELs determination based on the all available analytical data reported, the procedure and the outcome of the study may provide valuable insight on application of TBELs in Korea.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.779-784
• /
• 2008

환경부에서 추진하고 있는 토지피복 중분류별 비점오염부하원단위를 산정하기 위한 사업 중 나지로 분류되는 채광지역의 비점오염부하를 측정하였다. 비점오염부하는 강원도 삼척시 도계읍의 도계 작업장(석탄)과 태백시 장성동의 태백 저탄소 등 2곳의 채광지역에서 2007년 9월부터 12월까지 2회의 강우유출사상을 대상으로 측정하였다. 2회 강우사상 동안 총강수량은 도계 작업장에서 149 mm이었으며 태백 저탄소에서 201 mm이었다. 유출량은 수위계와 유량계로 5분 단위로 측정하였으며, 수질시료는 자동채수기로 2시간 간격으로 채취하였다. 수질시료는 환경부의 공정시험법에 따라 SS, BOD, CODcr, T-N, T-P, 그리고 TOC 농도를 분석하였다. 그리고 일부의 시료에 대해서는 Zn, Cb, Cu, 그리고 Pb의 농도를 분석하였다. 도계 작업장의 유량가중평균농도는 갱내수의 수질에 많은 영향을 받는 것으로 나타났다. 도계작업장의 일평균유량가중평균농도는 SS $86.3{\sim}94.9\;mg/{\ell}$, BOD $3.8{\sim}7.6\;mg/{\ell}$, COD $26.9{\sim}51.6\;mg/{\ell}$, T-N $1.5{\sim}2.1\;mg/{\ell}$, T-P $0.2\;mg/{\ell}$ 그리고 TOC $1.8{\sim}2.3\;mg/{\ell}$로 나타났다. 태백 저탄소의 일평균유량가중평균농도는 SS $16.5{\sim}66.6\;mg/{\ell}$, BOD $7.4{\sim}9.8\;mg/{\ell}$, COD $41.1{\sim}66.7\;mg/{\ell}$, T-N $0.7{\sim}1.1\;mg/{\ell}$, T-P $0.2\;mg/{\ell}$ 그리고 TOC $1.7{\sim}2.6\;mg/{\ell}$로 나타났다. 중금속의 농도는 모든 시료에서 환경부의 배출허용기준농도보다 낮게 나타나거나 검출되지 않았다. 도계 작업장의 일오염부하는 SS $1,368.8{\sim}1,984.1\;kg/day$, BOD $56.6{\sim}128.9\;kg/day$, COD $385.7{\sim}933.7\;kg/day$, T-N $23.4{\sim}44.5\;kg/day$, T-P $2.1{\sim}4.8\;kg/day$ 그리고 TOC $24.3{\sim}39.3\;kg/day$이었다. 태백 저탄소의 일오염부하는 SS $8.2{\sim}162.1\;kg/day$, BOD $2.6{\sim}15.3\;kg/day$, COD $13.8{\sim}83.6\;kg/day$, T-N $0.2{\sim}3.1\;kg/day$, T-P $0.1{\sim}0.6\;kg/day$ 그리고 TOC $0.7{\sim}4.4\;kg/day$로 나타났다. 본 연구는 2회의 강우유출사상에 대하여 측정한 자료이므로 연평균농도나 연평균오염부하로 활용하기는 어렵다. 그러나 석탄광산지역의 비점오염부하를 이해하는데 활용할 수 있으며 또한 장기적인 연구자료로 활용하여 석탄광산지역의 비점오염원단위의 산정에 유용한 자료로 활용할 수 있다.

• Journal of Korea Water Resources Association
• /
• v.49 no.11
• /
• pp.931-939
• /
• 2016

Bangudae Petroglopys of the national treasure No. 285 located in elevation of 53 m to 57 m have been damaged by repetition of submergence and exposure due to the Sayeon-dam of EL.60 m constructed in down stream. In this study, as a preservation plan of the petroglyphs from the contact with water, the construction of eco-levee was suggested and its effect was investigated in the views of hydraulic engineering. It was designed to be located aside of 80 m from Bangudae Petroglyphs with the length of 440 m in streamwise direction, and it was need to construct a new channel maintaining the original hydraulic capacity and conveyance. Hydraulic characteristics such as water surface elevations and velocities near Bangudae Petroglyphs were measured after the eco-levee was installed in the hydraulic model with the scale of 1:50. It showed that there were not much changes of water surface elevations and velocities between sayeon-dam spillway EL. 60 m (Suggestion 1) and EL. 54 m (Suggestion 2). It was concluded the eco-levee could be made of natural materials like soil, pebble, gravel in terms of allowable velocity and shear stresses. The slope of water surface at Suggestion 2 was steeper, and velocities near Bangudae Petroglyphs were also faster than Suggestion 1. As the vorties occured at the left side in Suggestion 2, more detailed study is required.