• Journal of dental hygiene science
• /
• v.15 no.1
• /
• pp.54-59
• /
• 2015

The present study investigated the influences of various abutment teeth shapes (maxillary right canine, pre-molar, molar) on the marginal adaptation of computer aided design/computer aided manufacturing-fabricated zirconia core. In vitro adaptation of zirconia cores manufactured by three different abutments were evaluated. Thirty zirconia cores were made per each models and the adaptation was evaluated through a silicone replica technique. The measurement of the adaptation was carried out using digital microscope. The mean and standard deviation of each reference point were analyzed using the one-way (ANOVA) and Tukey's honestly significant difference tests (${\alpha}=0.05$). The overall marginal fits of the zirconia cores were as follows: canine: $47.59{\mu}m$, pre-molar: $43.74{\mu}m$, molar: $40.36{\mu}m$. They were no statistically significant differences between groups for adaptation (p>0.05). This confirmed that the type of abutment teeth used does not determine the precision of fit of zirconia core.

• Korean Journal of Food Science and Technology
• /
• v.31 no.1
• /
• pp.30-35
• /
• 1999

A simple, rapid, efficient method is for extraction of 13 synthetic water-soluble food colours (Tartrazine, Amarnth, Indigo carmine, New coccine, Sunset yellow FCF, Allura red AC, Eosine, Fast Green FCF, Brilliant Blue FCF, Erythrosine, Acid red, phloxine, Rose Bengal) by polyamide resin and for their quantitative by high performance liquid chromatography (HPLC). Colours (coal-tar dyes) were extracted with polyamide resin and then determinated by HPLC. The HPLC conditions using a reverse phase partition type column $(Nova-pak\;C_{18})$, photodiode array (PDA) detector and 1% Ammonium acetate / 60% acetonitrile in water as eluent, were acceptable for various kinds of colorants. By the use of the proposed method, a survey of coal-tar dyes was carried out on 20 samples and that were detected $4.76{\sim}133.47\;ppm$.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.3
• /
• pp.11-21
• /
• 2015

Emergency Medical Service(EMS) has become focused due to all kinds of disaster and a great number of casualties. The 119 emergency vehicles' dispatching methods are now being focused, for travel time of ambulances are the critical components in terms of saving human lives. Therefore, this study tried to rearrange 119 EMS regions more efficiently. For this study, Daejeon Metropolitan City's real call cases were analyzed. In order to rearrange the regions, OD Cost Matrix analysis was performed between 800 thousands random points and 26 departments in the Daejoen Metropolitan City. By creating Thiessen Polygon from the random points, a new region was created. As a results, average areas of the regions were reduces from 32 square kilometers to 20 square kilometers, and average time of arrivals are were also improved. Hence, if related organizations plan to rearrange EMS regions, they may utilize this study.

• The Korean Journal of Pesticide Science
• /
• v.8 no.3
• /
• pp.184-188
• /
• 2004

The residue analysis of the insecticide thiodicarb in sweet persimmon was analyzed with a gas chromatograph equipped with nitrogen phosphorus detector(NPD) to evaluate efficacy of analysis method and safety of thiodicarb in persimmon. Minimum detectable amount of methomyl oxime, hydrolysate of thiodicarb, was 0.2 ng and detection limit of thiodicarb was 0.05 ppm. The mean recoveries evaluated from untreated samples spiked at 0.5 ppm and 2.5 ppm were $93.9{\pm}3.9$ and $92.8{\pm}2.0%$, respectively. When thiodicarb was sprayed onto the sweet persimmon two times until 40 and 30 days before harvest, three times until 40, 30 and 21 days before harvest, and four times until 40, 30, 21 and 14 days before harvesting, the mean residual amount in sweet persimmon were $1.50{\pm}0.04$, $1.86{\pm}0.04$ and $2.11{\pm}0.12$ ppm, respectively. It would be safe when thiodicarb 40% WP is treated four times 14 days before harvesting to control fruit moth in sweet persimmon.

• Korean Journal of Childcare and Education
• /
• v.10 no.2
• /
• pp.111-131
• /
• 2014

This study aims to research the use of smart devices of infants and preschool children, and their mothers' perception about it. Moreover, the goal of this study is to collect preliminary data about problems from the use of smart devices, and to prevent the problems. Therefore, the questions of inquiry for this study are: 1. How do infants and preschool children use smart devices? 2. How do mothers perceive their children using smart devices? Four hundred and forty mothers, who send their child to a day-care center or kindergarten in Busan, participated in this research and data among 397 of them were analyzed using PASW 18.0 program. The answers to a multiple-choice question were converted into a frequency and percentage. To verify the difference of factors, Chi-squared Test and One-way Analysis of Variance methods were used. The following are findings of this study: 1. Most of the families owning smart devices allow their children to use a smart device when children want it, and children use it for entertainment purpose before their bedtime. Children start to use a smart device mostly around the age of 4. Compared to girls, boys spend a longer time on smart devices playing mobile game. In addition, the research indicated that the children of younger mothers tend to use smart devices in earlier ages than the children of elder mothers. 2. Mothers of preschool children have higher perception about the availability of their child using smart devices compare to the mothers of day-care center. However, the research showed that elder mothers have more positive perceptions about all the other five lower factors, (e.g. educational characteristic, entertainment characteristic, design, safety, and smart recognition).

• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.285-292
• /
• 2012

Fixed connection is generally used for beam and column connections of concrete structures, but significant damages at the connection due to severe earthquakes have been reported. In order to reduce damages of the connection and improve seismic performance of the connection, several innovative connections have been suggested. One newly proposed connection type allows a rotation of the connection for applications in rotating or rocking beams, columns, and shear walls. Such structural elements would provide a nonlinear lateral force-displacement response since their contact depth developed during rotation is gradually reduced and the stress across the sections of the elements is non-linearly distributed around a contact area, which is called an elastic hinge region in the present study. The purpose of the present study is to define the elastic hinge region or length for the rocking columns, through investigating the cross-sectional stress distribution during their lateral behavior. Performing a finite element analysis (FEA), several parameters are considered including axial load levels (5% and 10% of nominal strength), different boundary conditions (confined-ends and cantilever types), and slenderness ratios (length/depth = 5, 7, 10). The FEA results showed that the elastic hinge length does not directly depend on the parameters considered, but it is governed by a contact depth only. The elastic hinge length started to develop after an opening state and increased non-linearly until a rocking point(pre-rocking). However, the length did not increase any more after the rocking point (post-rocking) and remained as a constant value. Half space model predicting the elastic hinge length is adapted and the results are compared with the numerical results.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.1
• /
• pp.105-115
• /
• 2013

As far as the universities in south Korea are concerned, they have to meet the need of the situation as the number of the incoming students are decreasing because of the population-reducing in south Korea. The Ministry of Education Science and Technology is enforcing the restructuring of an universities by evaluating all the universities in Korea by using some indices (employment rate, supplement rate of students etc.). Most of the universities in Korea are widely permitting the changes of the major study as a method to improve the 'supplement rate of students' among some measures. These changes of major study (moving in and moving out) can give rise to difficulties in managing an university because there might be the departments with a small number of students as they moving out from low level departments to high level ones. Moreover, as raising the change rate of the major study, there is no loss from the university's point of view but a department could be in a difficult situation. The purpose of this study is to grasp the characteristics for changing major study by a general statistical analysis and graphs produced by a social network analysis with the D university's case. The results of this study are as follows; (a) category is from the engineering to humanity-society, (b) entrance level is from low to high, and (c) employment rate is from low to high as well.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4C
• /
• pp.461-471
• /
• 2004

Recently, subscribers have strong desire to get QoS based personalized services in high-speed Internet access. Service providers have been rapidly replacing ADSL, cable broadband access networks with Metro-Ethernet based VDSL. But, it is difficult for Motto-Ethernet based broadband access networks to provide QoS based personalized services, because already deployed network elements cannot distinguish subscribers by specific traffic characteristics. In this paper, when the access network has tree topology, we show that it is possible to provide QoS for each downstream flow with only per flow traffic shaping at the edge node without QoS functions in access networks. In order to show that our suggested scheduling algorithm at the edge node can support the assured service in tree topology access networks, we evaluated its performance by simulation. The suggested scheduling algorithm can shape per-flow traffic based on the maximum bandwidth, and guarantees minimum bandwidth per flow by modifying the DRR scheduler. Simulation results show that congestion and loss in the access network elements are greatly reduced, TCP performance is highly enhanced and loss for assured CBR service flows is reduced by only shaping per-flow traffic at the edge node using our proposed scheduling algorithm.

• Journal of Digital Convergence
• /
• v.18 no.10
• /
• pp.233-238
• /
• 2020

In the cloud environment, IoT devices using sensors and wearable devices are being applied in various environments, and technologies that accurately determine the information generated by IoT devices are being actively studied. However, due to limitations in the IoT environment such as power and security, information generated by IoT devices is very weak, so financial damage and human casualties are increasing. To accurately collect and analyze IoT information, this paper proposes a topographic information-based key management technique that considers IoT information errors. The proposed technique allows IoT layout errors and groups topographic information into groups of dogs in order to secure connectivity of IoT devices in the event of arbitrary deployment of IoT devices in the cloud environment. In particular, each grouped terrain information is assigned random selected keys from the entire key pool, and the key of the terrain information contained in the IoT information and the probability-high key values are secured with the connectivity of the IoT device. In particular, the proposed technique can reduce information errors about IoT devices because the key of IoT terrain information is extracted by seed using probabilistic deep learning.

• Progress in Medical Physics
• /
• v.24 no.4
• /
• pp.290-294
• /
• 2013

Stereotactic Radiosurgery require high accuracy and precision of patient positioning and target localization. We evaluate the real time positioning accuracy of isocenter using optic guided patient positioning system, ExacTrac (BrainLab, Germany), during spinal radiosurgery procedure. The system is based on real time detect multiple body markers attached on the selected patient skin landmarks. And a custom designed patient positioning verification tool (PPVT) was used to check the patient alignment and correct the patient repositioning before radiosurgery. In this study, We investigate the selected 8 metastatic spinal tumor cases. All type of tumors commonly closed to thoracic spinal code. To evaluate the isocenter positioning, real time patient alignment and positioning monitoring was carried out for comparing the current 3-dimensional position of markers with those of an initial reference positions. For a selected patient case, we have check the isocenter positioning per every 20 millisecond for 45 seconds during spinal radiosurgery. In this study, real time average isocenter positioning translation were $0.07{\pm}0.17$ mm, $0.11{\pm}0.18$ mm, $0.13{\pm}0.26$ mm, and $0.20{\pm}0.37$ mm in the x (lateral), y (longitudinal), z (vertical) directions and mean spatial error, respectively. And body rotations were $0.14{\pm}0.07^{\circ}$, $0.11{\pm}0.07^{\circ}$, $0.03{\pm}0.04^{\circ}$ in longitudinal, lateral, table directions and mean body rotation $0.20{\pm}0.11^{\circ}$, respectively. In this study, the maximum mean deviation of real time isocenter positioning translation during spinal radiosurgery was acceptable accuracy clinically.