• Journal of the Korea Convergence Society
• /
• v.13 no.3
• /
• pp.125-131
• /
• 2022

Recently, the prevalence of remotely managed patient care systems in medical institutions is increasing due to COVID-19. In particular, in the case of fluid monitoring, hospitals are considering introducing it as a system that can reduce patient safety and nurses' work. There are two products under development: a load cell method that measures weight and a method that detects drops of sap by infrared sensing. Although each product has differences in operation principle, sensor type, size, usage, and price, medical institutions are highly interested in the accuracy of the data obtained.In this study, two prototypes with different sensor methods were manufactured and the total amount of infusion per hour was measured to test the accuracy, which is the core of the infusion monitoring device. In addition, when there was an external movement, the change in the measured value of the sap was tested to evaluate the accuracy according to the measurement method. As a result of the experiment, there was a difference of less than 5% in the measurement value error of the two devices, and the load cell method showed a difference in the low-capacity measurement value and the infrared method in the high-capacity measurement value. As a result of this experiment, there was little difference in accuracy according to the sensor method of the infusion monitoring device, and it is considered that there is no problem in accuracy when used in a medical institution.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.1
• /
• pp.57-78
• /
• 2022

The disc cutter and cutterbit, which are the most important factors to increase the excavation efficiency of TBM, are key factors in the design and construction of the cutter head. The arrangement, spacing, number, size, and material of disc cutters suitable for the ground conditions determine the success or failure of TBM construction. The disc cutter, which is a representative consumable part in TBM construction, can cause enormous disruption to the construction cost as well as the construction cost unless accurate prediction of wear and replacement cycle is accompanied. Therefore, in this study, the method of calculating the replacement cycle of the disc cutter calculated at the time of design for the slurry shield TBM field, and the depth of wear and replacement location of the disc cutter that occurred during actual construction were compared by analyzing the field data. For a quantitative comparison, weathered soil/weathered rock, soft rock, and hard rock were classified according to the ground in the section showing constant excavation data, and the trajectory of circle was different depending on the location of the disc cutter, so it was compared and analyzed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.5
• /
• pp.135-143
• /
• 2022

Rock platforms and TTP (breakwater) are dangerous environments commonly subject to tidal and high wave energy on the open coast. This paper is a study on risk assessment to provide risk information, which is a representative method for preventing coastal safety accidents. Risk assessment based on geo-morphological information was conducted for the Halmi-Halabi rock platform in Anmyeon-eup, Taean-gun, Chungcheongnam-do. As a result of the risk assessment in 16 directions, the risk was evaluated high in the NE, ENE, S, SSW, and W directions, where there are many sections with slopes exceeding ±20°, and the NW direction was the lowest. Geo-morphology on rock platform is central to understanding what makes one stretch of complex coastline more hazardous than another, and it can be used to create site-specific morphological risk item. In particular, it will be assisting coastal managers in an effort to reduce the number of injuries and drowning incidents by providing hazard information to assess the relative risk.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.435-450
• /
• 2022

In step-by-step site selection for geological disposal of high-level radioactive waste, parameters necessary for site selection will be acquired through deep drilling surveys from the basic survey stage. Unlike site investigations of rock mass structures such as tunnels and underground oil storage facilities, those related to the geological disposal of high-level radioactive waste are not only conducted in relatively deep depths, but also require a high level of quality control. In this report, based on the 750 m depth drilling experience conducted to acquire the parameters necessary for deep geological disposal, the methodology for deep drilling and the geology, geophysics, geochemistry, hydrogeology and rock mechanics obtained before, during, and after deep drilling are discussed. The procedures for multidisciplinary geoscientific investigations were briefly described. Regarding in-situ stress, one of the key evaluation parameter in the field of rock engineering, foreign and domestic cases related to the geological disposal of high-level radioactive waste were presented, and variations with depth were presented, and matters to be considered or agonized in acquiring evaluation parameters were mentioned.

• Journal of Life Science
• /
• v.32 no.1
• /
• pp.23-28
• /
• 2022

CopA3 (LLCIALRKK), an antimicrobial peptide isolated from the Korean dung beetle, has been shown to suppress apoptosis in various cell types. CopA3 inhibits not only bacterial toxin-induced colonocyte apoptosis but also 6-hydroxy dopamine-induced neural cell apoptosis. Our recent study revealed that CopA3 directly binds to caspases (key regulators of apoptosis) and inhibits the proteolytic cleavage required for their activation. But molecular mechanisms underlying CopA3-mediated inhibition of apoptosis in multiple cell types remain unknown. Here we assessed possible effects of CopA3 on expression of survivin, which is known to inhibit apoptosis. In HT29 human colonocytes, CopA3 exposure markedly upregulated survivin expression in a concentration- and time-dependent manner. RT-PCR revealed that CopA3-mediated upregulation of survivin was attributable to increased gene transcription, and further showed that CopA3 also increased expression of Sp1, one of many transcription factors known to be involved in transcription of the survivin gene. Notably, blocking Sp1 by treatment with the Sp1 inhibitor, tolfenamic acid, significantly reduced CopA3-mediated upregulation of survivin. These results collectively suggest that CopA3 induces Sp1 expression, which in turn is involved in upregulation of survivin in human colonocytes. These novel findings establish another pathway for explaining the anti-apoptotic effects of CopA3 against various cellular apoptosis systems.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.849-854
• /
• 2022

In this study, the anti-inflammatory effect of supercritical carbon dioxide selective extracts, which extract decursin and decursinol angelate, the vital active ingredients of Angelica gigas Nakai, in high yield, was measured compared to that of ethanol extracts. To measure the anti-inflammatory effect, the production of nitric oxide(NO), an inflammatory mediator, and interleukin(IL)-6 and IL-8, inflammatory cytokines, was measured. NO production was measured by Griess assay on Raw 264.7 cells induced inflammatory response by lipopolysaccharide(LPS), and IL-6 and IL-8 production was measured by enzyme-linked immunoadsorbent assay(ELISA) on human keratinocyte cell line(HaCaT) cells induced inflammatory response by tumor necrosis factor(TNF)-α. The amount of NO production was suppressed outstandingly by the supercritical carbon dioxide extracts compared to the ethanol extracts. The amount of IL-6 and IL-8 production was increased by the ethanol extracts, whereas statistically significantly inhibited by supercritical carbon dioxide extracts at the concentration of 6.25 ㎍/mL(P<0.01). Through these results, we confirmed that the supercritical carbon dioxide selective extracts of Angelica gigas Nakai could be used as an anti-inflammatory cosmeceutical material to alleviate atopic dermatitis.

• Journal of Life Science
• /
• v.32 no.9
• /
• pp.712-720
• /
• 2022

The purpose of this study was to investigate the efficacy of rat corneal-derived epithelial cells as an in vitro model to evaluate the harmfulness of the cornea caused by particulate matter 2.5 (PM_2.5). To establish an experimental model for the effect of PM_2.5 on corneal epithelial cells, it was confirmed that primary cultured cells isolated from rat eyes were corneal epithelial cells through pan-cytokeratin staining. Our results showed that PM_2.5 treatment reduced cell viability of primary rat corneal epithelial (RCE) cells, which was associated with the induction of apoptosis. PM_2.5 treatment also increased the generation of reactive oxygen species due to mitochondrial dysfunction. In addition, the production of nitric oxide and inflammatory cytokines was increased in PM_2.5-treated RCE cells. Furthermore, through heatmap analysis showing various expression profiling between PM_2.5-exposed and unexposed RCE cells, we proposed five genes, including BLNK, IL-1RA, Itga2b, ABCb1a and Ptgs2, as potential targets for clinical treatment of PM-related ocular diseases. These findings indicate that the primary RCE cell line is a useful in vitro model system for the study of PM_2.5-mediated pathological mechanisms and that PM2.5-induced oxidative and inflammatory responses are key factors in PM2.5-induced ocular surface disorders.

• Journal of Life Science
• /
• v.33 no.8
• /
• pp.612-622
• /
• 2023

T-cell deficiency may occur in various clinical conditions including congenital defects, cell/organ transplantation, HIV infection and aging. In this regard, the development of artificial thymus has recently been attracting much attention. To achieve this aim, the development of techniques for 3D culture of thymic stromal cells is necessary because thymocytes grown only in a 3D thymic microenvironment can be differentiated fully to become mature, immunocompetent T cells; the same cannot be achieved for thymocytes grown in 2D. This study aimed to develop a nanotechnology-based 3D culture technique using polymeric scaffolds for thymic epithelial cells (TECs), the main component of thymic stromal cells. Scanning electron microscopic observation revealed that the pores of both PCL and PCL/PLGA scaffolds were filled with TECs. Interestingly, TECs grown in 3D on polydopamine-coated scaffolds exhibited enhanced cell attachment and proliferation compared to those grown on non-coated scaffolds. In addition, the gene expression of thymopoietic factors was upregulated in TECs cultured in 3D on polydopamine-coated scaffolds compared to those cultured in 2D. Taken together, the results of the present study demonstrate an efficient 3D culture model for TECs using polymeric scaffolds and provide new insights into a novel platform technology that can be applied to develop functional, biocompatible scaffolds for the 3D culture of thymocytes. This will eventually shed light on techniques for the in vitro development of T cells as well as the synthesis of artificial thymus.

• Clean Technology
• /
• v.16 no.3
• /
• pp.213-219
• /
• 2010

Vortex tube is the device that can separate small particles from the compressed gas, as well as compressed gas into hot and cold gas. Due to energy and particle separation ability, a vortex tube can be used as the main component of the $CO_2$ absorption device. In this study, experimental approach has been performed to analyze the energy separation characteristics of the vortex tube. To obtain the preliminary design data, energy separation characteristics of the vortex tube has been tested for orifice diameter, nozzle area ratio, and tube length. As a result, the orifice diameter is the major factor of the vortex tube design. The nozzle area ratio and tube length have a minor effect on the energy separation performance. For Dc=0.6D, AR=0.14~0.16, and L=16D, maximum energy separation has been occurred. The result from this study can be used as the basic design data of the $100Nm^3$/hr class vortex tube applied to the $CO_2$ absorption device. Compared with the $CO_2$ absorption process containing an absorption tower, the process with a vortex tube is expected to have a huge advantage of saving the installation space and the operating cost.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.9
• /
• pp.45-55
• /
• 2009

The quality of railroad trackbed fills has been controlled by field measurements of density and bearing resistance of plate-load tests. The control measures are compatible with the design procedures whose design parameter is $k_{30}$ for both ordinary-speed railways and high-speed railways. However, one of fatal flaws of the design procedures is that there are no simple laboratory measurement procedures for the design parameters ($k_{30}$ or, $E_{v2}$ and $E_{v2}/E_{v1}$) in design stage. To overcome the defect, the compressional wave velocity was adopted as a control measure, in parallel with the advent of the new design procedure, and its measurement technique was proposed in the preliminary investigation. The key concept of the quality control procedure is that the target value for field compaction control is the compressional wave velocity determined at optimum moisture content using modified compaction test, and direct-arrival method is used for the field measurements during construction, which is simple and reliable enough for practice engineers to access. This direct-arrival method is well-suited for such a shallow and homogeneous fill lift in terms of applicability and cost effectiveness. The sensitivity of direct-arrival test results according to the compaction quality was demonstrated at a test site, and it was concluded that compressional wave velocity can be effectively used as quality control measure. The experimental background far the companion study (Park et al., 2009) was established through field and laboratory measurements of the compressional wave velocity.