• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.2
• /
• pp.61-67
• /
• 2009

In this paper time series wave data which contain a freak wave is investigated. Various wave characteristics are compared between wave data with a freak wave and without. Among 24 hour wave data measured in the Yura Sea, two adjacent 30 min wave data with and without a freak wave are examined intensively. It is seen that the highest waves do not have the longest wave period. The wave period of the longest period waves is a little longer than the average wave period and much shorter than the significant wave period. Although the sea state is quite high, the Rayleigh distribution fits well to the probability of wave height. The characteristics of the wave spectra do not change much, but the nonlinearity increases for the wave data with a freak wave. The significant wave height without a freak wave is larger than that with a freak wave. Hence, the higher significant wave height does not always increase the probability of the occurrence of the freak waves.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1996.06a
• /
• pp.33-36
• /
• 1996

해양에서 내부파 (internal wave)는 수직적으로 밀도가 크게 다른 두 층의 경계면에서 생성되는데, 일반적으로 경계면은 수온약층 (thermocline)에 해당된다. 본 연구에서는 간단한 단주기(하나의 주기만을 갖는)내부파를 가정하고 이 내부파에 의해서 야기될 수 있는 저주파 (100-400 HZ) 전파손실의 변동 정도를 모델링을 통해 추정하였다. 내부파의 파장은 1Km이고 진폭은 25m이며 수심 50-100m 사이에 존재하는 것으로 가정하였다. 전파손실 계산은 PE (parabolic equation) 기법을 도입한 모델을 이용하였다.수층의 두께는 2000m로 균일하고 퇴적층 및 기반암층의 두께는 각각 500m로 가정하였다. 모델링 결과 단주기 내부파의 1 파장이 진행하는 동안 고정된 수신 깊이별로 20km 거리에서 10 dB 이상의 큰 변동이 야기 될 수 있음을 확인하였다. 이는 내부파 내에서 큰 굴절을 변화로 인한 음파의 산란 때문으로 볼 수 있다. 실제 해양에서는 내부파가 단주기 파동 형태로 나타나기 보다는 여러 주기의 파동이 중첩되어 나타나므로 정확한 내부파 영향을 추정하기 위해서는 보다 실제에 가까운 내부파를 모델링할 필요가 있다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.6
• /
• pp.177-187
• /
• 2022

This study estimates the design wave in the event of a typhoon attack at Busan new port using the wind field, the revised shallow water design wave estimation method proposed by the Ministry of Oceans and Fisheries in 2020, and proposed a reliable method of calculating the shallow water design through verification with the wave observation data. As a result of estimating typhoon wave using the wind field and SWAN numerical model, which are commonly used in the field work, for typhoon that affected Busan new port, it was found that reproducibility was not good except typhoons KONG-REY(1825) and MAYSAK(2009). In particular, in the case of typhoon MAEMI(0314), which had the greatest impact on Busan new port, the maximum significant wave height was estimated to be about 35.0% smaller than that of the observed wave data. Therefore, a plan to improve the reproducibility of typhoon wave was reviewed by applying the method of correcting the wind field and the method of using the Boussinesq equation numerical model, respectively. As a result of the review, it was found that the reproducibility of the wind field was not good as before when the wind field correction. However as a method of linking wind field data, SWAN model results, and Boussinesq numerical model, typhoon wave was estimated during typhoon MAEMI(0314), and the maximum significant wave was similar to the wave observations, so it was reviewed to have good reproducibility.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1992.08a
• /
• pp.114-117
• /
• 1992

2차원 수조에서 조파기를 정현파형으로 가동시키면 조파기에서 멀리 떨어진 점에서는 초기의 천이과정을 거쳐 상당한 시간이 경과한 다음 파고와 주기가 일정한 정현파가 전파되어 나간다. 초기의 천이과정에는 비교적 파장이 긴 파성분이 전파하며 감쇄하는데, 이 파성분은 정상파형과 다른 특성을 보인다.(중략)

• Journal of Korean Port Research
• /
• v.11 no.1
• /
• pp.121-128
• /
• 1997

To analyze the ocean wave more efficiently, more fine grids are used with relatively less computer memory. Each element of free surface is discretized into more fine grids because the ocean waves are much influenced by the mesh used in the finite difference scheme. According to the flow analysis, remarkable improvements could be seen in the free surface generation. The multi grid is applied to confirm the validity of scheme. The Baldwin Lomax turbulence model is used for the analysis of S103 Inuid ship. Finally some discussion on experiments was made for the physical phenomena of the viscous

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.5
• /
• pp.558-565
• /
• 2017

Accurate prediction of wave-structure interactions is important in the safety and design cost effectiveness of fixed and floating offshore structures exposed to extreme environmental conditions. In this study, regular waves and circular column structure interactions for four circular columns in regular waves are analyzed. To simulate 3D two-phase flow, open source computational fluid dynamics libraries, called OpenFOAM, were used. When the four circular columns are arranged in a square array, the interactions according to the incident slopes of the regular waves are analyzed. The wave run-up in the circular column surface was compared according to the slope of the incident wave. It was confirmed that high amplitude waves are generated between the circular columns due to the interaction between the circular column and the incident wave. It is expected that this analytical result will be used as the basic data of the study on the air gap due to the interaction between the structure and incident wave.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.195-201
• /
• 2006

The wave load and its influence on the response of offshore structure have been well investigated through the statistical approach based on the linear theory. The linear approach has a limitation to apply the extreme condition such as freak wave, which corresponds to extreme value of wave spectrum. The main topic of present study is to develop an efficient numerical method to predict wave load induced by extreme wave. As a numerical method, finite element method based on variational principle is adopted. The frequency-focusing method is applied to generate the extreme wave in the numerical wave tank. The wave load on the bottom mounted vertical cylinder is investigated. The hydroelastic response of the vertical cylinder is also investigated so as to compare the wave loads with the rigid body case in the extreme wave condition.

• Journal of Navigation and Port Research
• /
• v.31 no.1 s.117
• /
• pp.21-27
• /
• 2007

The wave load and its influence on the response of offshore structure have been well investigated through the statistical approach based on the linear theory. The linear approach has a limitation to apply the extreme condition such as extreme wave, which corresponds to extreme value of wave spectrum. The main topic of present study is to develop an efficient numerical method to predict wave load induced by extreme wave. As a numerical method, finite element method based on variational principle is adopted. The frequency-focusing method is applied to generate the extreme wave in the numerical wave tank. The wave load on the bottom mounted vertical cylinder is investigated. The hydroelastic response of the vertical cylinder is also investigated so as to compare the wave loads with the rigid body case in the extreme wave condition.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.3
• /
• pp.236-244
• /
• 2019

Internal waves occur at the interface between two layers caused by a seawater density difference. The internal waves generated by a body moving in a two-layer fluid are also related to the generation of surface waves because of their interaction. In these complex flow phenomena, the experimental measurements and experimental set-up for the wave patterns of the internal waves and surface waves are very difficult to perform in a laboratory. Therefore, studies have mainly been carried out using numerical analysis. However, model tests are needed to evaluate the accuracy of numerical models. In this study, the various experimental conditions were evaluated using CFD simulations before experiments to measure the wave patterns of the internal waves and surface waves in a stratified two-layer fluid. The numerical simulation conditions included variations in the densities of the fluids, depth of the two-layer fluid, and moving speed of the underwater body.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.197-198
• /
• 2018

In recent years, diversified demand for marine utilization has been increasing not only through the development projects for the utilization of the conventional coastal zone but also by the development of marine leisure sports and marine energy. It is very important to understand the characteristics of blue for safe and economical utilization of the ocean. Using the observed wave data, we derive the wave parameters to represent the irregular sea state proposed in the previous studies and examine the relationship between them to confirm the characteristics of the ocean wave.