• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5A
• /
• pp.665-672
• /
• 2008

In the study herein, the fatigue test was conducted on the fillet welds of the load carrying cruciform joint, which is frequently used in the steel structures such as bridges, ships, etc. In addition, the fatigue strength was analyzed with respect to the different post-weld treatment. The treatment methods used include Toe Grinding, TIG Dressing, and Weld Profiling. The fatigue test was under constant amplitude with repeated load for these test specimens. In the load carrying full penetration fillet welded joints, regardless the conduction of the post-weld treatment or not, they all secured the fatigue strength of category "F", which exceeds the fatigue design specifications of BS Code. In the comparison of the fatigue strength upon the post-weld treatment, the fatigue strength tends to increase according to the order: Toe Grinding, TIG Dressing, and Weld Profiling.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.3
• /
• pp.331-340
• /
• 2023

To estimate the biological reference points, suitable for fisheries management of sandfish Arctoscopus japonicas in the East Sea of Korea, we simulated the yield-per-recruit (Y/R) from age 0 to 6 (0-2,555 days). The stimulation was based on two instantaneous natural mortality conditions: size-dependent (M_t, d^-1) and constant (M_cons, d^-1); Subsequently, the biological reference points of the two mortality conditions was compared. M_t decreased from 0.0075 d^-1 to 0.0018 d^-1 depending on growth, and M_cons remained constant at 0.0011 d^-1 for all ages. Our Y/R model showed that the maximum yield of M_cons was 14 times higher than that of the M_t. The length at first capture to maximize the harvest at the F_0.1 points of the two natural mortality conditions was L_c,t=10.2 cm (TL) and L_c,cons=17 cm (TL). We concluded that M_t was more suitable for estimating M than M_cons; this is because L_c,t showed minimal difference from the current fishing regulations (11 cm, TL), and M_t reflected more biological characteristics than M_cons. We suggest that 10.2 cm and 0.8 as the suitable length at first capture and corresponding age, respectively for efficient fisheries management of sandfish.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.469-469
• /
• 2022

하구담수호는 하천의 종점에서 해양과 만나는 곳에 방조제를 건설해 담수를 유도하여 형성되는 인공호수이다. 유역 말단에 위치하기 때문에 유역에서 유출되는 모든 수자원을 확보할 수 있는 장점이 있지만, 유역에서 발생하는 오염물질이 모두 유입되고 인공적인 담수의 특성 때문에 수질이 악화되기 쉬운 조건을 지니고 있다. 담수호의 수질관리는 유입되는 오염물질의 양이 많고 담수된 수자원량도 많으므로 부분적인 방법으로는 개선이 어려우며, 유역과 호소를 포함한 종합적인 대책이 필요하다. 담수호의 수질관리대책 수립은 크게 상류 유역에 대한 대책과 호소에 대한 대책으로 구분된다. 대표적인 대책으로는 상류 유역의 하수처리장, 축사, 농경지 관리를 통한 배출부하량 감소와 호소 내 수질개선을 위한 습지, 저류지 건설 및 준설을 통한 내부부하 감소 등이 있다. 이처럼 담수호의 수질관리를 위해서는 상류 유역에서 호소까지 종합적으로 고려해야 한다. 본 연구에서는 유역모형과 호소모형의 연계를 통해 간월호 유역을 모의하였다. 유역모형은 HSPF(Hydrological Simulation Program-FORTRAN) 모형을 사용하였으며, 유역 내 3개의 하수처리장과 1개의 분뇨처리장을 고려하였으며, 4개 지점에 대하여 보정 및 검정을 시행하였다. 호소모형은 EFDC-WASP 연계모형을 이용하였으며, HSPF에서 모의 된 유입량과 호내 설치된 4개의 양수장, 배수갑문 운영일지를 고려하여 모의하였다. 호소 내 수질 측정지점에 대하여 T-N, T-P에 대하여 보정 및 검정을 수행하였다. 본 연구는 담수호 수질관리를 위한 분석시스템 구축으로 추후 대책에 따른 효과분석에 활용할 수 있을 것이다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.28 no.6
• /
• pp.99-105
• /
• 2023

Submarines, which require a high degree of survivability, are among the most critical combat weapon systems in military strategic assets. Conventional submarines need air to operate their propulsion systems. Exhaust gases released into the water during snorkel navigation heat the surrounding fluid, producing a temperature wake. This wake, in turn, reduces the submarine's survivability. In this study, we conducted a preliminary experiment on the temperature traces formed by an underwater submarine's waste discharge. For this purpose, we collected propulsion system and navigation condition data from domestically introduced submarines and developed an experimental system to measure the temperature traces. As a result, we observed that high-temperature bubbles injected into the tank broke down into smaller sizes, and their temperature dropped to levels similar to the surrounding fluid. This observation was confirmed using a thermocouple sensor. Consequently, the thermal imaging system designed to measure the temperature trace of the water's surface did not detect any significant temperature traces.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.242-243
• /
• 2023

Different incident angles concerning ocean conditions and weather greatly influence small vessel navigation. Particularly for small vessels, different incident angles result in distinct motion characteristics closely related to stability. Based on actual coastal wave data, this study conducted simulations and experiments to analyze the motion characteristics of small vessels navigating in irregular waves. The analysis revealed that significant motions primarily occurred at lower speeds from the bow sea. In contrast, as the speed increased, the roll motions due to the bow sea decreased, but those due to the stern seas increased. Consequently, adjusting the incident wave angles according to vessel speed can enhance stability and navigational efficiency for small vessels.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.2
• /
• pp.97-102
• /
• 2023

Numerical simulations have been performed to investigate the hydrodynamic characteristics of the rudder since they play an important role in naval architecture fields. Although some values such as hydrodynamics forces can be measured easily in the towing tanks, it is difficult to obtain the detailed information of the flow fields such as pressure distribution, velocity distribution, vortex generation from experiments. In the present study, the effects of hydrodynamic coefficients and Reynolds number acting on the rudder were studied by using Computational Fluid Dynamics(CFD). Ansys fluent, one of commercial CFD solvers, solves the Navier-Stokes equations and the k-epsilon turbulence model is selected for the viscous model to solve RANS equations. At first, drag coefficients and lift coefficient for different angle of attack are obtained by using a CFD commercial code for KCS rudder. Secondly, the 2-D lift coefficients and drag coefficients are compared with 3-D coefficients at the same conditions. Thirdly, the effects of Reynolds number on the hydrodynamic forces are investigated.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.7
• /
• pp.339-345
• /
• 2006

We suggest new 2D two-way Parabolic equation algorithm for multiple scattering. Our method is based on the successive performance of the single scattering approach. First. as the single scattering algorithm, the reflected and transmitted fields are calculated at the vertical interface of a range independent sector. Then. the reflected field is saved and the transmitted field Propagated to the next vertical interface with the split-step Pade method. After one step ends, the same Process is repeatedly performed with the change of the Propagation direction until the reflected field at the vertical interface is close to zero. Final incoming and outgoing fields are obtained as the sum of the wave fields obtained for each step. Our algorithm is relatively simple for the numerical implementation and requires less computational resources than the existing algorithm for multiple scattering

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.16 no.2
• /
• pp.106-115
• /
• 2011

The aim of this study is to assess the importance of ballast water discharge as a vector for the introduction of exotic species into Pusan and Daesan Ports, Korea. We also examined to understand the impacts of environmental factors on the survival success of introduced species by ship's ballast water in laboratory experiments. Seven ship's ballast water originated from the coastal water of China (Taicang, Ningbo and Jinshan), Japan (Tokuyama, Moji and Akita), and Singapore. According to PCA (principal components analysis) analysis, environmental factor in the each ballast and shipside waters were different by bioregion. Based on cluster analysis, the phytoplankton community structures were distinguished for ballast water origin. Most of the major taxonomic groups were diatoms and, the others were dinoflagellate, silcoflagellate and several fresh-waters species. In particular, species number and standing crops of phytoplankton in the ballast tanks decreased with the increasing age ofballast water(r = -0.35 for standing crop; r = -0.63 for species number). In the laboratory study, although phytoplankton in ballast water treatment did not survive even in optimal temperature, the in vivo fluorescence of phytoplankton viability increased under the nutrient typical of shipside water and F/2 medium at $15^{\circ}C$ and $20^{\circ}C$. The diatoms species such as Skeletonema costatum and Thalassiosira pseudonana in ballast water were successfully regrown. On the salinity gradient experiments for Shui Shan (2) vessel, several freshwater species, brackish and marine species were successfully adapted. Of these, S.costatum was able to tolerate a wide range of salinities (10 to 30 psu) and its species-specific viability was suitable for colonization.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.5
• /
• pp.445-456
• /
• 2001

In the 1990s, Cochlodinium polykikoides red tide has been annually occurred in the southern coast of Korea and caused the mass damage to the fisheries with a huge amount of economic loss. The present study was done to establish the biological foundation for the elucidation of the mechanism of C. polykikoiaes red tide. The growth response of C. polykikoides to physico-chemical factors such as temperature, salinity, pH, and light intensity were examined using axenic cultures to evaluate the relative importance of these factors on the dynamics of natural populations, It was found that the highest growth conditions were $25^{\circ}C,\;40\%_{\circ}$, pH 7.5, and 7,500 lux, respectively. The tolerable salinity range of growth was relatively wide at an optimum temperature and was reduced to a much narrower range at a sub-optimum temperature. These findings indicate that C. polykikoides is an eurythermal and euryhaline organism. The organism demanded higher light intensity and oceanic pH narrow in its growth. C. polykikoides utilize inorganic nutrients, such as nitrate and ammonium as N, and phosphate as P. The nutritional requirements of C. polykikoides were $40{\mu}M$ for nitrate, $50{\mu}M$ for ammonium, and $5{\mu}M$ for phosphate. The half saturation constant (Ks) for growth was $2.10{\mu}M$ for nitrate, $1.03{\mu}M$ for ammonium, and $0.57{\mu}M$ for phosphate. These values were comparatively smaller than those of other dinoflagellates reported previously. We confirmed that the organism is characterized as an eutrophic species. However, ammonium Ks value is smaller than that of other eutrophic species, This result indicates that C. polykikoides red tide may outbreak in the waters which eutrophication is in progress rather than eutrophicated waters. C. polykikoides preferred ammonium better than nitrate as a nitrogen source when in a growth stage, Therefore, our results indicate that ammonium is more important nutrient on the growth of the organism in comparison with other inorganic nutrients and C. polykikoides red tide is related with the increased ammonium concentration in the coastal waters.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.3
• /
• pp.208-218
• /
• 2012

Numerical simulation technique has been developed to calculate microwave backscattering from water surface. The simulation plays a role of a substitute for experiments. Validation of the simulation was shown by comparing with experimental results. Water area observations by microwave radar have been simulated to evaluate algorithms and systems. Furthermore, the simulation can be used to understand microwave scattering mechanism on the water surface. The simulation has applied to the various methods for water area observations, and the utilizations of the simulation are introduced in this paper. In the case of fixed radar, we show following examples, 1. Radar image with a pulse Doppler radar, 2. Effect of microwave irradiation width and 3. River observation (Water level observation). In addition, another application (4.Synthetic aperture radar image) is also described. The details of the applications are as follows. 1. Radar image with a pulse Doppler radar: A new system for the sea surface observation is suggested by the simulation. A pulse Doppler radar is assumed to obtain radar images that display amplitude and frequency modulation of backscattered microwaves. The simulation results show that the radar images of the frequency modulation is useful to measure sea surface waves. 2. Effect of microwave irradiation width: It is reported (Rheem[2008]) that microwave irradiation width on the sea surface affects Doppler spectra measured by a CW (Continuous wave) Doppler radar. Therefore the relation between the microwave irradiation width and the Doppler spectra is evaluated numerically. We have shown the suitable condition for wave height estimation by a Doppler radar. 3. River observation (Water level observation): We have also evaluated algorithms to estimate water current and water level of river. The same algorithms to estimate sea surface current and sea surface level are applied to the river observation. The simulation is conducted to confirm the accuracy of the river observation by using a pulse Doppler radar. 4. Synthetic aperture radar (SAR) image: SAR images are helpful to observe the global sea surface. However, imaging mechanisms are complicated and validation of analytical algorithms by SAR images is quite difficult. In order to deal with the problems, SAR images in oceanic scenes are simulated.