• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.60-62
• /
• 2003

본 연구는, 초고압 GIS(Gas Insulated Switchgear)용 GCB(Gas Circuit Breaker)의 3상 배치구조를 설계 하기 위한 상간, 대지간의 절연성능을 평가하였다. 피임펄스 전압과 상용주파 전압인가시 상간, 대지간의 절연설계 기준과 비교하여 절연설계 안전율을 고려하여 설계에 적용하였다. 수치적 전계 해석법으로 3차원 전계 해석법과 2차원 축대칭 전계 해석법을 통해 전계 강도를 비교하였으며 3차원 전계 해석법으로는 경계 요소법(Boundary Element Method)을 사용하는 상용프로그램인 coulomb을 사용하였으며, 2차원 전계 해석법으로는 유한요소법(Finite Element Method)을 사용하는 Maxwell을 통해 절연성능 평가를 하였다. 마지막으로, 전계 해석을 통해 절연설계 기준에 적합한 상배치 구조 설계를 하였다.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.208-210
• /
• 2005

본 논문에서는 전압 불안정성을 해소시키기 위한 방안으로 FACTS를 투입하기 위한 방안에 대하여 논의 하였다. 우선적으로 전압안정도 기준을 수립하고 상정사고에 대하여 PV 해석을 실시하고 전압안정도 기준을 만족시키지 못하는 사고를 스크리닝 한다. 각 상정 사고에 대하여 선정된 전압안정도 기준을 만족하도록 하기 위한 FACTS 투입 방안에 대하여 논의하였다. 일반적으로 전압안정도 측면에서 취약위치를 선정하는 방법으로 VQ해석이나 Tangent vector에 의한 Bus sensitivity를 구하여 부하변화에 대한 전압 감도(dV/$dP_{TOTAL}$)가 큰 모선을 취약 위치로 선정하는 방법, 또는 Modal Analysis를 통해 구한 참여인수값이 큰 모선을 취약 모선으로 선정하는 방법이 있다. 이 논문에서는 VQ해석과 Tangent vector를 이용한 해석 방법을 이용하여 전압안정도 측면에서 취약 위치 및 전압안정도 향상을 위한 FACTS 투입 후보지를 선정하였고 전압안정도 기준을 만족시키기 위해 각 후보지에 투입해야할 FACTS 용량을 산정하였다. 마지막으로 실질적으로 수도권 주요 모선에 모두 FACTS를 투입한 결과와 논문에서 사용한 방법과의 결과를 비교하여 적절한 절차를 사용하여 FACTS가 투입되었음을 확인하였다.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.85-97
• /
• 2003

In this paper, earthquake response analyses were performed using equivalent linear method at the soil sites classified as soil types III and IV in "Standard Design Loads for Buildings" Soil Factors were back-calculated by using spectral accelerations obtained from the analyses and those values are compared with soil factors described in other domestic seismic guidelines. For buildings which have the natural period higher than 0.9 sec, it was possible to use soil factors of soil types II and III instead of those of soil types III and IV, respectively. Therefore, it can be concluded that seismic base shear force can be overestimated in the current seismic guidelines and the improvement is required. required.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1471-1478
• /
• 2013

In this paper, numerical analysis with varying distance and burial depth was performed to recommend the blasting vibration control standard for pre-insulated pipes. The blasting load model applied in the numerical analysis was verified to the comparison with the results of the field tests. It was determined from the results of the numerical analysis that the effective stress either exceeds or approaches the allowable stress of the inner steel pipe for vibration velocity greater than 4.0cm/sec while stability is obtained for vibration velocity below 4.0cm/sec. Therefore, it was determined that the blasting vibration control criteria for pre-insulated pipes must not exceed 4.0cm/sec.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.1
• /
• pp.97-107
• /
• 2020

In this study, finite element analysis was carried out through the finite element analysis program (ANSYS) to investigate the fire resistance of composite columns in fire. Transient heat transfer analysis and static structural analysis were performed according to ASTM E 119 heating curve and axial force ratio 0.7, 0.6, 0.5 by applying stress-strain curves according to temperature, and loading heating experiments were carried out under the same conditions. In addition, the nominal compressive strength of the composite column according to the heating time according to the standard(Eurocode 4) was calculated and expressed as the axial force ratio and compared with the analytical and experimental values. Through the analysis, As a result of finite element analysis, the fire resistance time was 180 minutes and similar value to the experimental value was obtained, whereas the fire resistance time 150 minutes and 60 minutes were derived from the axial force ratios 0.6 and 0.7. In addition, it was confirmed that the fire resistance time according to the axial force ratio calculated according to the reference equation (Eurocode 4) was lower than the actual experimental value. However, it was confirmed that the standard(Eurocode 4) was higher than the experimental value at the axial force ratio of 0.7. Accordingly, it is possible to confirm the fire resistance characteristics(time-axial force ratio relationship) of the SRC column at high axial force, and to use the experimental and anaylsis data of the SRC column as the data for verification based on Eurocode.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.217-222
• /
• 2017

Any object located in the earth's gravitational field experiences a force in the direction of the center of the earth. In order to describe the motion of objects in the field, the solutions to a system of simultaneous vector kinematic equations need to be obtained. In the analysis of freely-falling objects, the reference direction +y is usually defined to be the downward direction. In the analysis of the motion of objects thrown upward, the reference direction +y is usually defined to be the upward direction. In the analysis of the motion of objects thrown downward, the reference direction +y is usually defined to be the downward direction. In this paper, we show that the choice of reference axis in either upward or direction gives the same results by adopting a scalar product of two vectors in solving the vector kinematic equations. It is rare to find other examples of using a scalar product of two vectors in solving vector kinematic equations describing the motion of objects. An application of this study is that we can arbitrarily choose the reference direction for objects moving in a horizontal direction, including projectile motions.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.1
• /
• pp.1-8
• /
• 2009

In order to evaluate the effect of shear wave velocity of a seismic control point on site response analysis, one-dimensional equivalent linear site response analysis were performed on the model soil profile based on the results of a detailed site investigation of sedimentary layers at Incheon and Busan. The results of the analysis show that an increase of shear wave velocity on the seismic control point (base rock) results in an increase of acceleration in the soil layers. This was mainly due to an unclear definition of the seismic control point. For this reason, the Korean Seismic Design Standard requires a specific definition of the seismic control point, including spatial conditions and soil properties, similar to the MCE (Maximum Considered Earthquake) in FEMA 369.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.3
• /
• pp.303-309
• /
• 2005

Numerical analysis is carried out to identify the appropriateness of the design codes that is available for the tensile design of fastening system at Nuclear Power Plant (NPP) in this study. This study is intended for the cast-in-place anchor that is widely used for the fastening of equipment in Korean NPPs. The microplane model and the elastic-perfectly plastic model are employed for the quasi-brittle material like concrete and for the ductile material like anchor bolt as constitutive model for numerical analysis and smeared crack model is employed to simulate the clack and damage phenomena. The developed numerical model is verified on a basis of the various test data of cast-in-place anchor. The appropriateness of both ACI 349 Code and CEB-FIP Code is evaluated for the tensile design of cast-in-place anchor and it is proved that both design codes give a conservative results for real tensile capacity of cast-in-place anchor.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.171-173
• /
• 2006

본 논문에서는 엘리베이터 도어의 구조해석을 수행하기 위하여 3차원 유한요소해석 코드인 ANSYS를 활용하였으며 도어의 개폐장치의 왕복운동을 고려하였다. 이러한 결과를 활용하여 승강기 안전기준에 적합한 도어 개폐장치의 세계기준을 확립하였으며 구조적 안정성을 평가하였다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.457-458
• /
• 2015

전기저장장치를 이용하여 전기사업법에 따른 발전사업을 하려고하는 경우 전기저장장치는 기존 발전설비에 비하여 상이한 특성을 갖는 신생 자원으로서 정부가 발전사업을 허가처분을 하는 데에 관련규정의 명확성이 문제가 될 소지가 있었다. 이와 관련하여 기존의 연구에는 주무관청이 해석에 따라 발전사업허가를 부여한 경우 소관 행정청의 해석을 존중한다는 "행정판단 존중(Chevron deference)의 원칙"을 적용하자는 주장이 있었다.(박훤일) 그러나 2014년 12월 "전기설비기술기준" 개정을 통해 전기저장장치가 발전설비에 추가됨에 따라 이러한 해석이론을 거치지 아니하고도 정부가 전기저장장치 설치자에게 현행 전기사업법 및 발전사업세부운영기준에 따라 발전사업을 허가하는 것이 가능해 졌다. 다만, 발전사업세부허가 기준 중 전력계통운영의 적정성 유지에 대한 심사와 관련하여 기준설정이 필요할 것인데, 이는 신뢰도 고시에 반영할 사항으로 판단하였다.