• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.118-119
• /
• 2013

마리나 시설 내 계류된 선박 및 레저장비를 악천 후 해상상태와 선박 운항에 의해 발생된 파로부터 장비 및 인명의 안전을 위한 파 제거 장치가 필요하다. 본 연구에서는 국내 각 지자체의 수요에 부응하고 시설 및 인명의 안전을 위한 소파 시스템개발을 목적으로 시제품 제작(설계, 해석, 수조시험 등 수행완료)하였다. 실해상 성능시험에서 항주파의 발생을 위해 시험선박 선정하였으며, 소파장치 전후의 파고계측 등을 위해 부가물을 계측하여 파고를 촬영 및 계측하였다. 개발된 소파장치의 실해상 시험임을 감안해 해상 주위의 조류, 풍속, 인근 해역에서 오는 파랑변형 등에 따른 파랑요소를 고려하여 시험하였다. 부소파제는 약 40~80% 의 에너지 감소율을 보였으며, 유의파고 조건에서 42%의 에너지 감소율을 보였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1984.07a
• /
• pp.69-73
• /
• 1984

본 연구는 현업부서에서 손쉽게 적용할 수 있는 종관적인 객관적 예보 방법을 개발하기 위하여 동해역을 16개 격자점으로 구성된 격자망을 설정, 각 격자점별로 해상풍과 파고를 산출하여 해상풍 및 파고 분석도를 작성하는 방법을 제시하였다. 실측 치와 계산치를 검증 해 본 결과, 해상풍에 있어서는 1:1로 잘 대응되고 있으며 상관 계수도 평균 0.70 이상의 좋은 결과를 얻었고, 파고 에 있어서는 평균 0.5m 미만의 오차 범위를 보였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.325-325
• /
• 2018

파랑 중 4점 계류식 해상부유체의 운동 특성은 4점 계류의 상태에 따라 운동해석이 달라질 수 있다. 본 연구에서는 부상체의 부력과 파랑의 파고 및 풍압으로 인한 계류색에 미치는 장력에 대하여 검토하고자 한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.268-273
• /
• 2011

Withstanding the continuous treat from the typhoon and nasty weather from ocean, the development of the real time monitoring buoy such as ocean wave related monitoring buoy system becomes essential. In this research, the development of the ocean wave monitoring buoy system had been done domestically. The development including the data real-time monitoring (wind, temperature and pressure) added in the buoy, buoy mooring and real-time data communication system. The developed wave monitoring buoy system (drift type, wave direction and wave height type) is expected to meet the demands.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.5
• /
• pp.493-499
• /
• 2010

In the sea-floating logistics port called mobile harbor a crane system with the different structure from the conventional above-ground container crane is installed. And, the dynamic stability of whole mobile harbor by the wave excitation is definitely affected by the crane positioned at the top. This paper is concerned with the dynamic rolling analysis of the mobile harbor subject to sea state 3 wave excitation, for which two-step analysis procedure composed of theoretical and numerical approaches is employed. First, the rigid rolling of mobile harbor is obtained according to the linear wave theory. And then, the dynamic rolling response of the flexible crane system caused by the rolling excitation of mobile harbor is analyzed by finite element analysis. The coupled interaction effect between the sea wave and the mobile harbor is taken into consideration by the added mass technique.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.5
• /
• pp.306-315
• /
• 2010

As developing the large-scale offshore wind farm is expected, the preliminary environmental impact assessment is very essential. In this study, the wave hindcast model is verified based on observed data at the coast around Wido which is among the candidate sites for developing the offshore wind farm. In addition, the effect of the wind turbine foundations on wave height is analyzed when total 35 wind turbines including monopile foundations of 5 m in diameter are installed. Calculation result of significant wave height is in good accord with observed data since the RMS error is 0.35 m. Moreover, it is found that the presence of the wind turbine foundations hardly affects wave height as wave damping ratio is less than 1%.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.4
• /
• pp.329-335
• /
• 2007

The eye measurement to observe the sea surface condition and estimate the wave height has been used in the open sea or the ship. The experts in the eye estimation can measure the wave height very accurately. The Beaufort wind scale is most widely used as a standard index of the eye measurement. However, more definite reference data such as the representative images by each wave heights must be necessary because the appearances and explanations in the Beaufort wind scale are not enough to understand the sea surface condition far the researcher and the public. The modern field data acquisition technique has been developed to measure wave heights, ocean weather data and even images of the sea surface in real-time. In this study, the wireless field image transmitting system for wave heights and images is installed in the real-time ocean measurement system of Chodo light tower near Sokcho city in South Korea. The wave heights and surface images acquired from the real time system in the field are compared with explanations of the Beaufort wind scale. The wave heights and images measured with the precision ultrasonic wave sensor and the scientific sea surface image transmitting system should be helpful to obtain more precise and definite information than the data from the Beaufort wind scale.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.1
• /
• pp.145-152
• /
• 1996

In this study, the technique to evaluate the extreme design wave height of certain return period is developed from the given measured or hindcasted sea state data of concerned area for limited period. By using the order statistics and Monte Carlo Simulation method, the best fit probability distribution function with proper parameters describing the given wave height data is chosen, from which extreme design wave height can be predicted by extrapolation to the desired return period. The fitness and the confidence limit of the chosen probability function are also discussed. Application calculation is carried out for the wave height data given by applying the Wilson wave model theory to major 50 typhoon wind data affecting Korean South coast during the year from 1938 to 1987.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.3
• /
• pp.115-128
• /
• 2019

In this study, a probabilistic model for the estimation of yearly workable wave condition period for offshore operations is developed. In doing so, we first hindcast the significant wave heights and peak periods off the Ulsan every hour from 2003.1.1 to 2017.12.31 based on the meteorological data by JMA (Japan Meterological Agency) and NOAA (National Oceanic and Atmospheric Administration), and SWAN. Then, we proceed to derive the long term significant wave height distribution from the simulated time series using a least square method. It was shown that the agreements are more remarkable in the distribution in line with the Modified Glukhovskiy Distribution than in the three parameters Weibull distribution which has been preferred in the literature. In an effort to develop a more comprehensive probabilistic model for the estimation of yearly workable wave condition period for offshore operations, wave height distribution over the 15 years with individual waves occurring within the unit simulation period (1 hour) being fully taken into account is also derived based on the Borgman Convolution Integral. It is shown that the coefficients of the Modified Glukhovskiy distribution are $A_p=15.92$, $H_p=4.374m$, ${\kappa}_p=1.824$, and the yearly workable wave condition period for offshore work is estimated to be 319 days when a threshold wave height for offshore work is $H_S=1.5m$. In search of a way to validate the probabilistic model derived in this study, we also carry out the wave by wave analysis of the entire time series of numerically simulated significant wave heights over the 15 years to collect every duration periods of waves the height of which are surpassing the threshold height which has been reported to be $H_S=1.5m$ in the field practice in South Korea. It turns out that the average duration period is 45.5 days from 2003 to 2017, which is very close to 46 days from the probabilistic model derived in this study.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.3
• /
• pp.125-130
• /
• 1992

A digital 6-dof motion measuring system is developed using 7 accelerometers following Miles'[1] method. A snoic wave height gauge is also developed to measure the relative wave height at the foremost end of the ship. By combining the time series of both 6-dof motions and relative wave height, we can estimate the time series of real sea wave. Results of model tests shows the validity of the developed system.