• Bulletin of the Society of Naval Architects of Korea
• /
• v.31 no.1
• /
• pp.57-63
• /
• 1994

속력시운전에는 건조된 배의 추진성능이 선주와의 계약속도를 만족시키는가를 확인하는 Acceptance Trial 과, 건조된 배의 추진성능이 모형시험 등에 의한 추정 결과와 맞는가를 확 인하고 다음 배의 설계에 참고하기 위한Performance Trial로 크게 나눌 수 있다. Acceptance Trial로서의 실선시운전은 새로 배를 만들어 선주에게 인도하기 위한 필수의 과정이며, 이 중 에서 저항추진 성능을 검증하기 위한 속력시운전은 가장 중요한 항목중의 하나이다. 선발 조선 국들에서는 실선시운전 및 해석방안을 꾸준히 연구하여 왔고, 표준 수행방안과 표준 해석방안도 이미 확정한 후 여러차례 보완한바 있다. 조선의 역사가 깊지 못한 우리는 이에 대한 깊이 있는 연구는 물론, 이렇다할 시운전 표준수행방안이나 표준해석방법 조차 제시하지 못하고 있는 실 정이다. 특히 국내 조선업계의 실선시운전 해역은 일본은 물론 유럽의 시운전해영들 보다도 해상 상태가 거칠어서 이에 대한 보정방법 개발이 절실히 요망되고 있다. 본 고에서는 이제까지 선진 조선국에서 수행된 중요한 실선속력시운전 내용을 훑어보고, 각국의 표준수행방안을 비교해 보고, 해석방법들의 내용을 알아 본 후, 앞으로의 발전 방향을 모색해 보았다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.438-441
• /
• 2004

Reduction of a ship's rolling is the most important performance requirement for improving the safety of the crew on board and preventing damage to cargos as well as improving the comfort of the ride. A mass driving anti-rolling system (MD-ARS) might be one candidate of several systems against the ship's rolling. In this paper, a sea-trial test on a pendulum-type MD-ARS passively operated is carried out in Suyoung, Busan. After the system is installed on the cabin of the small leisure boat, a series of test is conducted before and after operating the system. Through the test, it is confirmed that the roll rate of the ship is pretty well reduced by the system.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.4
• /
• pp.11-18
• /
• 1998

This study describes sea trial tests for a waterjet propulsion system attached in the hybrid super high speed cargo ship named "Narae". A measuring technique of jet velocity, gross thrust and impeller torque for the waterjet system is explained. From the measured data in sea trial test, performance of the waterjet propulsion system is analyzed and compared with model test results of a similar waterjet system which was carried out in 1996. The erective horse power estimated from sea trial tests shows a good agreement with resistance test results of the model ship. The optimum rising height is estimated as 0.75 m, and the overall efficiency of the waterjet system is predicted as 0.315 at 15 knots. Useful data such as the pump performance, the jet efficiency, the losses of inlet duct and nozzle were obtained. Test results show a similar behavior to the model test results.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.310-312
• /
• 2022

지능형 해상교통서비스에 대한 개선방안 연구가 활발히 진행되고있는 가운데 서비스에 대한 사용성 및 유효성에 대해 ECS를 기반으로 하여 평가도구 및 그 방법을 개발하여 실선 및 시뮬레이션 시험 및 연구하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.4
• /
• pp.51-57
• /
• 1994

In this study, the method for calculation of the frequency transfer function of motions based on the multi-directional waves in the analysis of a full-scale seakeeping trials is presented. For calculation of the frequency transfer function in the directional waves, Takezawa's inverse estimation method was introduced and the frequency ranges were divided into three parts in order to consider following seas. To confirm the validity of this method, the numerical simulation was executed. Those results show that analysis method of the multi-directional waves is more reliable than that of one directional waves, and confirm the possibility of applying this method to the full-scathe seakeeping trials.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.31-33
• /
• 2007

최근에 선박이 대형화, 고속화되면서 선수 충격파 영향으로 인하여 선체 또는 화물에 잦은 손상을 초래하기도 하고, 극단적인 상황에서는 선박이 절단되기도 한다. 본 논문에서는 내항성능 평가요소 중 하나인 상하가속도 값을 선교에 설치된 선체감시장치를 이용하여 해상상태별 변화량을 계측하고, 이를 모형시험 및 이론계산 결과와 상호 비교하였다. 또한 ITTC 에서 제시하는 내항성능 기준치와도 비교함으로써 실습선 한바다호의 내항성능을 확인하였다. 이러한 결과는 앞으로 경험할 수 있는 다양한 해상상태에서의 작업가능성 및 위험성 정도의 예측을 가능하게 함으로써 선박의 안전운항에 큰 도움이 될 것으로 판단되며, 또한 다양한 실선계측 자료를 통하여 조선소에서는 보다 우수한 성능의 선박 건조가 가능하리라 본다.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.3
• /
• pp.125-130
• /
• 1992

A digital 6-dof motion measuring system is developed using 7 accelerometers following Miles'[1] method. A snoic wave height gauge is also developed to measure the relative wave height at the foremost end of the ship. By combining the time series of both 6-dof motions and relative wave height, we can estimate the time series of real sea wave. Results of model tests shows the validity of the developed system.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.3
• /
• pp.19-28
• /
• 1995

This paper presents hull form design details and performance characteristics of the SWATH ship 'SEON JIN' built as an underwater test support ship. The hull form is developed systematically varing sets of 11 form parameters which define a unique hull under waterline. Using this geometry variation scheme we have generated a number of alternatives and selected the final hull which fulfills the design objectives and matches the design constraints. After selecting the final hull form we have investigated performances thoroughly through model tests, and confirmed through sea trials that the performance goals be achieved.

• Journal of Navigation and Port Research
• /
• v.31 no.10
• /
• pp.813-818
• /
• 2007

There are the C.W.C and Towing Tank to the model-test equipments of the boat. A model testing of the high speed boat have a difficult in the performance verification because of very a small the scale-ratio of the ship-model and restricted by flow-velocity of the C.W.C and X-carriage velocity of the T.T. In general, the stepped hull boat is a high of fuel-efficiency because of the resistance reduction by a small wetted surface-area in correspond without stepped-hull boat. But It have a tendency to be bad the rolling performance by reduced stern wetted-area In this paper, the high speed stepped planning-boats with & without attached a stern body were performed to compare the effect of resistance and rolling performance by using sea model-test method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.727-730
• /
• 2004

Reduction of a ship's rolling is the most important performance requirement for improving the safety of the crew on board and preventing damage to cargos as well as improving the comfort of the ride. A mass driving anti-rolling system (MD-ARS) might be one candidate of several systems against the ship's rolling. In this paper, three types of MD-ARS, two passive and one active devices, are developed for small ships. After they are installed on the cabin of the small leisure boat, respectively, a series of test is conducted before and after operating them. Through the test, it is confirmed that the roll responses of the ship are pretty well reduced by the system.