• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.07a
• /
• pp.348-350
• /
• 2015

VTS 센터는 선박관제를 위해서 생성하는 실시간적인 해상교통정보를 생성하고 잇으며, 항만물류정보, 해양기상정보, 조선소 시운전 정보, 해상교통 환경정보, 선종별 운항정보, 사고 선박정보, 준사고 선박정보, 기타 정보 등을 수집하여 선박의 통항관제에 활용하고 있음에 따라 해상교통관제 시스템에 수집된 빅데이터의 처리방안에 대하여 고찰해 보았다.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.6
• /
• pp.112-118
• /
• 2013

This paper reports the results of a comparative study on rudder performance between the steel rudders that have been used in coastal angling fishing boats in the 20-GT class and the newly developed FRP composite material rudders. In order to compare the rudder performances of these two types, a sea trial test was carried out to investigate the speed performance, fuel consumption, and ship's turning ability. The results showed that the sea trial performance of the FRP composite rudder was better than that of the steel rudder type in terms of the sea speed, fuel consumption rate, and turning ability.

• Journal of Navigation and Port Research
• /
• v.44 no.6
• /
• pp.453-459
• /
• 2020

A sea trial of the speed performance test is the one of the most important means of verifying a ship's performance, and the International Organization for Standardization established a standard for this test in 2015. Environmental disturbances such as wind and waves are always present under real sea conditions, however, so it is impossible to accurately estimate delivered horsepower under ideal conditions. These disruptive influences also make it difficult to evaluate the positive effect of recently developed energy-saving devices. In this study, uncertainty analysis of improved speed performance was carried out using Monte Carlo simulation to confirm the energy-saving efficiency of a ship equipped with an air-lubrication system. The findings showed the average power saving to be 3.2%, with the expanded uncertainty of ± 2.7% at a 95% confidence level (k=2).

• Bulletin of the Society of Naval Architects of Korea
• /
• v.31 no.4
• /
• pp.7-9
• /
• 1994

해상의 신속성능해석은 경제적인 측면에서나 기술적인 측면에서 반드시 필요하다는 것은 주지의 사실이라 하겠다. 이를테면 (1)시운전결과해석법의 개선, (2)Service Power Marhin 산정법의 개선, (3)연료경제성이 고려된 최적속력산정, (4)실선-모형선 상관수정값 개선, (5)고성능선박을 위한 통합설계법의 개선, (6)미래선박의 설계자료 수집, (7)용선계약과 관련된 문제점 해소등 수 많은 예를 찾을 수 있다.'1' 상기에 예시된 목적들의 달성을 위하여서는 이론적인연구 이외에 선 속의 체계적인 mNOITORING이 추천되고 있다. 효율적인 Monitoring system을 문헌'2,3,4'에서 예를 찾을 수 있다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.5
• /
• pp.552-557
• /
• 2014

The objective of the This study is to access the speed performance employing the sea trial test and CFD with the our own designed and manufactured one-man boat. The overall design process including hull form design was explained. The sea trial was carried out with a manufactured boat in the clam sea. Brake power at the design speed of a boat through the sea trial was measured as 1680 W. The flow computation was conducted considering free surface and dynamic trim using a commercial CFD code(STAR-CCM+). The result of computation provided the information that residual resistance is bigger than fraction's at design speed. The total efficiency were predicted based on the sea trial and CFD. The Total efficiency was divided into shaft efficiency and quasi-propulsive efficiency. By using quasi-propulsive efficiency, it becomes possible to predict speed performance of boat in future. The results can provide information regarding hull form design, performance analysis and development of a boat in future.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.1
• /
• pp.53-60
• /
• 1999

Prior to sea trials, dock trials are usually carried out in order to check the main propulsion system and auxiliaries. At that time the motion of a ship is limited by mooring ropes. In Hyundai Heavy Industries, a simple equation is used to obtain propeller thrust which is used as an input data of mooring analysis. Recently the ship size and the engine power become larger. Therefore a careful analysis of the mooring condition is necessary in order to avoid possible accidents. In this study propeller thrust at deck trials is reviewed and examined through a series of model tests.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.5
• /
• pp.595-602
• /
• 2017

In Korea, much research and development have occurred to enhance the technological competitiveness of tuna purse seining fisheries. Due to these efforts, fishing efficiency has been improved with the development of radar, sonar and global positioning systems for fish detection and revisions to the hull forms of tuna purse seiners. However, for skiff boats, net boats and speed boats, which are auxiliary working boats mounted on tuna purse seiners, technology has lagged behind relative to the modernization of the main vessel. In this study, the hull of an existing propeller-based net boat with steel wire net to protect tuna was changed to the hull of a water jet propulsion vehicle to reduce resistance and improve maneuverability. As a result, a prototype of a water jet propulsion option was produced according to the aluminum structure strength standards specified by the Ministry of Oceans and Fisheries, and safety was confirmed by performing a drop test. Moreover, through a sea trial test, an existing net boat was shown to have a speed of 12.0knots and a towing force of 2,545 kgf at 2,500 RPM. The prototype had a speed of 26.7 knots and a towing force of 2,011 kgf at 3,200 RPM, which satisfied the towing capacity standards of auxiliary working boats mounted on tuna purse seiners.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.81-82
• /
• 2018

선박안전법에 따라 대다수의 관공선 주기관은 8년마다 정기 개방검사를 해야 한다. 주기관 특성상 개방검사는 많은 예산 소요 및 엔진 효율성의 저하가 우려되어 이를 해결하고자 관련법에 따라 8년간 개방검사 면제 사전 준비로 예산을 절감하고 기관의 성능을 최적화 시켰다.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.125-125
• /
• 2017

• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.261-261
• /
• 2017