• (The) Research of the performance art and culture
• /
• no.22
• /
• pp.93-121
• /
• 2011

This article is concerned with the withdrawal of the compositional principle of Jinogigut which has been performed in Seoul and the identification of its meaning based on the withdrawal. Jinogigut is a world where a god is connected to humans in complicated manners, this world and the world of the dead coexist, and it is a process of demonstrating that the dead, who have stayed in the world of humans, enter the world of a god. Jinogigut shows the process of leading the dead to the world of the dead one after another. First, the god-centered street is continued, and the gut displays through which process a god will guide the dead to the world of the dead. Next, is a human-centered street, which exhibits the appearance of the dead heading to the world of the dead following the death angel, more in detail. Finally, a human-centered structure shows how humans enter the world of the dead. Through this repetition, it reveals that the dead take a seat in the world of the dead, at last. The organization of the later part of the world of the dead-oriented gut in Jinogigut, which is god-centered, continues to a human-centered gut through the meeting between a god and humans. and , which are continued, followed by , are ceremonial rituals that confirm the dead entering the world of the dead without any problem. Begareugi shows that the entering of the dead into the world of the dead was completed with perfection by cutting hemp cloth, and informs the living that the dead expressed gratitude for holding the ritual for him/her by appearing at the venue of the gut once again and that the dead settled into the world of death. , which finally holds ancestral rites to the god of ancestors who is seated in the world of the dead, reveals that the dead, who had been a human, has been transformed into the god of ancestors through Jinogigut. Jinogigut also performs the function of comforting a client (who is the family of the dead) of the gut, who has faced a sudden death in his/her family. What is the most important for consoling the client is to display that the dead has entered the world of the dead without any problem. Jinogigut shows this process through a three-layered structure. It exhibits how the dead would be moved to the world of gods, as well as the safe entering of the dead who followed Jeoseung-saja(envoy from the world of the dead) and who had appeared to this world from the world of the dead. Then, it demonstrates again the appearance of the dead entering the world of the dead following Barigongu; thus, it placates the heart of the client's family.

• Korean Journal of Ecology and Environment
• /
• v.56 no.1
• /
• pp.45-56
• /
• 2023

In stream ecosystem assessment, RIVPACS, which makes a simple but clear evaluation based on macroinvertebrate community, is widely used. In this study, a preliminary study was conducted to develop a RIVPACS-type model suitable for Korean streams nationwide. Reference streams were classified into two types(upstream and downstream), and a prediction model for macroinvertebrates was developed based on each family. A model for upstream was divided into 7 (train): 3 (test), and that for downstream was made using a leave-one-out method. Variables for the models were selected by non-metric multidimensional scaling, and seven variables were chosen, including elevation, slope, annual average temperature, stream width, forest ratio in land use, riffle ratio in hydrological characteristics, and boulder ratio in substrate composition. Stream order classified 3,224 sites as upstream and downstream, and community compositions of sites were predicted. The prediction was conducted for 30 macroinvertebrate families. Expected (E) and observed fauna (O) were compared using an ASPT biotic index, which is computed by dividing the BMWPK score into the number of families in a community. EQR values (i.e. O/E) for ASPT were used to assess stream condition. Lastly, we compared EQR to BMI, an index that is commonly used in the assessment. In the results, the average observed ASPT was 4.82 (±2.04 SD) and the expected one was 6.30 (±0.79 SD), and the expected ASPT was higher than the observed one. In the comparison between EQR and BMI index, EQR generally showed a higher value than the BMI index.

• Journal of the Daesoon Academy of Sciences
• /
• v.42
• /
• pp.45-73
• /
• 2022

The phenomenon of veneration for Queen Mother of the West [西王母 Chn: Xiwangmu Kr: Seowangmo] is a 'cultural flow' that has garnered great interest not only in China but also in Korea for many years. To properly understand the cultural trend regarding the Queen Mother of the West, it is essential to view the related mythology as it corresponds to East Asian women as well as the transformation of society's view of women. In addition to the outcomes that result from the establishment of a patriarchal society, the relationship between goddesses and gods gradually becomes a relationship of discrimination based upon differences. Accordingly, as women change into objects that are given meaning rather than subjects that give meaning, the de-sacredization of the goddess occurs. This paper focused on the changes in the perception of the Queen Mother of the West from the view of Yin-Yang theory. This approach shows a transition process of transforming wherein she has morphed into an assistant or spouse of a god as part of a trend that deemphasizes the divinity of her as a stand-alone goddess. Yin-Yang theory is the key to understanding culture, history, and art as well as Chinese philosophy. This key can be further applied to the theme of women in mythology. What is particularly noteworthy about the process by which the Queen Mother of the West was defined as a goddess is that she was original described as half-human and half-beast and yet by the time her depictions became fully human and fully woman, she was described instead as an absolute beauty endowed with great artistic talent. In this paper, it will be revealed that the perception of the Queen Mother of the West, as an absolute beauty and artistic talent, is embedded with the male societal desire for an image of the feminine as understood via Yin-Yang theory. Queen Mother of the West as she was depicted in the Classic of Mountains and Seas (山海經 Chn: Shanhaijing Kr: Sanhaegyeong) had a half-human half-beast form that instilled people with fear of disasters and punishments from heaven. However, in the Han Dynasty, her religious significance became that of an object to ward off evil and attain blessings. By the time of the novel, Tales of the Strange (志怪小說 Chn: Zhiguaixiaoshuo Kr: Jigoesoseol), from the Wei, Jin, Southern and Northern Dynasties, she was transformed into a goddess in the image of beautiful woman in charge longevity and immortality. From the perspective of Yin-Yang theory, the changes in the perception of Queen Mother of the West was found to contain the following meaning: as an extension of the establishment of a patriarchal system and subordinate laws, her new form was made to be pleasing to the male gaze and Yin-Yang theory was brought in to support those changes later.

• Journal of the Daesoon Academy of Sciences
• /
• v.42
• /
• pp.75-108
• /
• 2022

This paper aims to newly investigate the meaning of life in this era when various discussions on life and ethical living are commonly raised by comparing and examining the theories of life proposed by Confucianism and Daesoon Thought. Both Confucianism and Daesoon Thought explain the creation of all things as having been based on the principles of life in heaven and earth. Specifically, there is the will to live (生意 saengeui) and also divine beings (神明 sinmyeong). For this reason, everything in heaven and earth is created by obtaining the same principle of life such that it is an equal being with the same intrinsic value. Here the consciousness of being one body amid all things as one living thing is established. The consciousness of being one body forms an organic worldview in which all things are one. As a result, all things in heaven and earth exist within a mutual organic relationship, and that makes oneself and others precious life partners that coexist rather than separate beings. Nevertheless, both Confucianism and Daesoon Thought define humans as outstanding beings, set aside for a higher purpose than other beings. The excellence of humans is that by constantly engaging in self reflection and completing tasks through independent efforts, they thereby achieve the great moral doctrine of coexistence and symbiosis. In this process, cultivation of character (修養 suyang) and cultivation of the Dao (修道 sudo) are presented as means to realize one's nature and establish the right human image. By realizing nature or humanity through the cultivation of character and cultivation of the Dao, humans fulfill their responsibilities and missions by independently participating in being nourished by Heaven and Earth (天地化育 cheonjihwayuk) or the Reordering Works of Heaven and Earth (天地公事 cheonjigongsa), both being based in the concept of the three generative forces of Heaven, Earth, and Humanity (天·地·人 cheon·ji·in). In the end, the theories of life posited by Confucianism and Daesoon Thought are based on a consciousness of being one body. Both emphasize the characteristics and roles of humans who are distinguished from other beings and phenomena. At this time, human characteristics and roles are revealed as the reasons for which humans have a responsibility and mission take care of all things. From this point of view, it can be seen that the theoretical structure of Neo-Confucianism and Daesoon Thought, in regards to their theories of life, is rather similar.

• Resources Recycling
• /
• v.31 no.6
• /
• pp.44-51
• /
• 2022

In the steelmaking process using an electric arc furnace (EAF), light-burnt dolomite, which is a flux containing MgO, is used to protect refractory materials and improve desulfurization ability. Furthermore, a recarburizing agent is added to reduce energy consumption via slag foaming and to induce the deoxidation effect. Herein, a waste MgO-C based refractory material was used to achieve the aforementioned effects economically. The waste MgO-C refractory materials contain a significant amount of MgO and graphite components; however, most of these materials are currently discarded instead of being recycled. The mass recycling of waste MgO-C refractory materials would be achievable if their applicability as a flux for steelmaking is proven. Therefore, experiments were performed using a target composition range similar to the commercial EAF slag composition. A pre-melted base slag was prepared by mixing SiO₂, Al₂O₃, and FeO in an alumina crucible and heating at 1450℃ for 1 h or more. Subsequently, a mixed flux #2 (a mixture of light-burnt dolomite, waste MgO-C based refractory material, and limestone) was added to the prepared pre-melted base slag and a melting reaction test was performed. Injecting the pre-melted base slag with the flux facilitates the formation of the target EAF slag. These results were compared with that of mixed flux #1 (a mixture of light-burnt dolomite and limestone), which is a conventional steelmaking flux, and the possibility of replacement was evaluated. To obtain a reliable evaluation, characterization techniques like X-ray diffraction (XRD) analysis and X-ray fluorescence (XRF) spectrometry were used, and slag foam height, slag basicity, and Fe recovery were calculated.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.1
• /
• pp.69-84
• /
• 2023

Despite the continuous installation and regular inspection of waste treatment facilities, complaints about excessive incineration and illegal dumping stench continue to occur at on-site treatment facilities. In addition, field surveys were conducted on the waste treatment facilities currently in operation (6 type) to understand the waste treatment process for each field, to grasp the main operating factors applied to the inspection. In addition, we calculated the material·energy balance for each main process and confirmed the proper operation of the waste disposal facility. As a result of the site survey, in the case of heat treatment facilities such as incineration, cement kilns, and incineration heat recovery facilities, the main factors are maintenance of the temperature of the incinerator required for incineration and treatment of the generated air pollutants, and in the case of landfill facilities Retaining wall stability, closed landfill leachate and emission control emerged as major factors. In the case of sterilization and crushing facilities, the most important factor is whether or not sterilization is possible (apobacterium inspection).In the case of food distribution waste treatment facilities, retention time and odor control during fermentation (digestion, decomposed) are major factors. Calculation results of material balance and energy resin for each waste treatment facility In the case of incineration facilities, it was confirmed that the amount of flooring materials generated is about 14 % and the amount of scattering materials is about 3 % of the amount of waste input, and that the facility is being operated properly. In addition, among foodwaste facilities, in the case of an anaerobic digestion facility, the amount of biogas generated relative to the amount of inflow is about 17 %, and the biogas conversion efficiency is about 81 %, in the case of composting facility, about 11 % composting of the inflow waste was produced, and it was comfirmend that all were properly operated. As a result, in order to improve the inspection method for waste treatment facilities, it is necessary not only to accumulate quantitative standards for detailed inspection methods, but also to collect operational data for one year at the time of regular inspections of each facility, Grasping the flow and judging whether or not the treatment facility is properly operated. It is then determined that the operation and management efficiency of the treatment facility will increase.

• Journal of Korean Port Research
• /
• v.6 no.2
• /
• pp.65-92
• /
• 1992

The Korean central government has not appreciate the full extent of the impact of seaports on the national economy. As a consequence port investment has not been given sufficient priority and capacity has failed to keep pace with demand. The principal reason for this failure is the fact that the linkages (or relationships) of the port transport industry with other sectors have not been quantified and fully appreciated. To overcome this dificiency this paper developed a port input-output model to determine the economic impact of the port industry on the national economy. This impact study was conducted by analysing the impact of the Korean port industry upon the national economy from the macroeconomic viewpoint, and identifying the spreading effects of port investments upon the nation's economy. The analysis of the economic impact of the port industry suggests that its contribution to the Korean economy is substantial. What the model shows is, in quantifiable terms, there are the strong economic linkages between the port industry and the other sectors of the national economy. The contribution of the port industry to the Korean economy was summarised in the Conclusion section.

• Journal of Korean Port Research
• /
• v.12 no.1
• /
• pp.35-46
• /
• 1998

The CY can be said to function in various respect as a buffer zone between the maritime and overland inflow-outflow of container. The amount of storage area needed requires a very critical appraisal at pre-operational stage. A container terminal should be designed to handle and store containers in the most efficient and economic way possible. In order to achieve this aim it is necessary to figure out or forecast numbers and types of containers to be handled, CY area required, and internal handling systems to be adopted. This paper aims to calculate the CY area required for each container handling system in Mokpo New Port. The CY area required are directly dependent on the equipment being used and the storage demand. And also the CY area required depends on the dwell time. Furthermore, containers need to be segregated by destination, weight, class, FCL(full container load), LCL(less than container load), direction of travel, and sometimes by type and often by shipping line or service. Thus the full use of a storage area is not always possible as major unbalances and fluctuations in these flow occuring all the time. The calculating CY area must therefore be taken into account in terms of these operational factors. For solving such problem, all these factors have been applied to estimation of CY area in Mokpo New Port. The CY area required in Mokpo New Port was summarized in the conclusion section.

• Journal of Korea Water Resources Association
• /
• v.56 no.6
• /
• pp.403-417
• /
• 2023

In this research, a methodology was developed for constructing an appropriate rainfall image database for estimating rainfall intensity based on CCTV video. The database was constructed in the Large-Scale Climate Environment Chamber of the Korea Conformity Laboratories, which can control variables with high irregularity and variability in real environments. 1,728 scenarios were designed under five different experimental conditions. 36 scenarios and a total of 97,200 frames were selected. Rain streaks were extracted using the k-nearest neighbor algorithm by calculating the difference between each image and the background. To prevent overfitting, data with pixel values greater than set threshold, compared to the average pixel value for each image, were selected. The area with maximum pixel variability was determined by shifting with every 10 pixels and set as a representative area (180×180) for the original image. After re-transforming to 120×120 size as an input data for convolutional neural networks model, image augmentation was progressed under unified shooting conditions. 92% of the data showed within the 10% absolute range of PBIAS. It is clear that the final results in this study have the potential to enhance the accuracy and efficacy of existing real-world CCTV systems with transfer learning.

• Journal of the Society of Disaster Information
• /
• v.19 no.2
• /
• pp.395-410
• /
• 2023

Purpose: The purpose of this study was to analyze the current state of drone terrorism response at such critical national facilities and derive improvements, especially to identify problems in laws and systems to effectively utilize the anti-drone system and present directions for improvement. Method: A qualitative research method was used for this study by analyzing a variety of issues not discussed in existing research papers and policy documents through in-depth interviews with subject matter experts. In-depth interviews were conducted based on 12 semi-structured interviews by selecting 16 experts in the field of anti-drone and terrorism in Korea. The interview contents were recorded with the prior consent of the study participants, transcribed back to the Korean file, and problems and improvement measures were derived through coding. For this, the threats and types were analyzed based on the cases of drone terrorism occurring abroad and measures to establish anti-drone system were researched from the perspective of laws and systems by evaluating the possibility of drone terrorism in the Republic of Korea. Result: As a result of the study, improvements to some of the problems that need to be preceded in order to effectively respond to drone terrorism at critical national facilities in the Republic of Korea, have been identified. First, terminologies related to critical national facilities and drone terrorism should be clearly defined and reflected in the Integrated Defense Act and the Terrorism Prevention Act. Second, the current concept of protection of critical national facilities should evolve from the current ground-oriented protection to a three-dimensional protection concept that considers air threats and the Integrated Defense Act should reflect a plan to effectively install the anti-drone system that can materialize the concept. Third, a special law against flying over critical national facilities should be enacted. To this end, legislation should be enacted to expand designated facilities subject to flight restrictions while minimizing the range of no fly zone, but the law should be revised so that the two wings of "drone industry development" and "protection of critical national facilities" can develop in a balanced manner. Fourth, illegal flight response system and related systems should be improved and reestablished. For example, it is necessary to prepare a unified manual for general matters, but thorough preparation should be made by customizing it according to the characteristics of each facility, expanding professional manpower, and enhancing response training. Conclusion: The focus of this study is to present directions for policy and technology development to establish an anti-drone system that can effectively respond to drone terrorism and illegal drones at critical national facilities going forward.