• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.1
• /
• pp.39-47
• /
• 2008

Automatic landing performance of UAV can be enhanced by adding Pseudolite(PL) to GPS. However, it is very hard to install and operate PL with confidence because GPS satellites are moving and the landing zone are usually changeable. The coverage and accuracy of combined GPS and PL can be estimated by using simulator and the correct information is very crucial to UAV operation. In this paper, design, implementation and evaluation of GPS/PL simulator for UAV landing are given. A very realistic coverage estimation is obtained using GIS data and ray launching method with considerations of the transmitter power level, altitude of UAV, number and location of PL. The expected accuracy is estimated using DOP and NSP computed using both GPS and PL. The performance of simulator is evaluated by comparing with the results of a real GPS receiver, and the certified simulator shows the required accuracy for UAV landing can be easily met by proper installation of at least 2 PLs.

• Journal of Advanced Navigation Technology
• /
• v.21 no.6
• /
• pp.633-637
• /
• 2017

Cyber attacks on aircraft and aeronautical networks are not much different from cyber attacks commonly found in the ground industry. Air traffic management infrastructure is being transformed into a digital infrastructure to secure air traffic. A wide variety of communication environments, information and communications, navigation, surveillance and inflight entertainment systems are increasingly threatening the threat posed by cyber terrorism threats. The emergence of unmanned aircraft systems also poses an uncontrollable risk with cyber terrorism. We have analyzed cyber security standards and response strategies in developed countries by recognizing the vulnerability of cyber threats to aircraft systems and aviation infrastructure in next generation data network systems. We discussed comprehensive measures for cybersecurity policies to consider in the domestic aviation environment, and discussed the concept of security environment and quick response strategies.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.4
• /
• pp.181-186
• /
• 2016

Recently, the surveillance system research has focused because Unmanned Aerial Vehicle(UAV) has the ability to monitor wide area. When the wide area are monitored, controlling UAVs repeatedly by pilots invokes the cost problem to operate UAVs. If monitoring path can be defined in advance, the cost problem can be solved by controlling UAVs autonomously based on the monitoring path. The traditional approach generates multiple motor primitives based on flied GPS locations. However, the monitoring points by UAVs are not considered by the generated motor primitives, the surveillance by UAVs is not performed properly. This paper proposes a motor primitive structure for surveillance UAVs to be flied autonomously. Motor primitives are generated automatically by setting surveillance points to denote surveillance targets accurately.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.2
• /
• pp.181-186
• /
• 2017

Synthetic aperture radar(SAR) has been widely used for reconnaissance. It provides high-resolution, day-and-night and weather-independent images for a multitude of applications. Because SAR coherently combines many viewing angles to effectively create a large aperture(narrow beam) radar, the test-bed should be capable of moving straightly SAR sensor for the integration angle to meet resolution. This paper describes the test-bed developed to test and evaluate the SAR performance. It forms high-quality images in real time and saves the raw data for the purpose of post processing on the ground.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.7
• /
• pp.550-557
• /
• 2017

Ionospheric delay, which affect the accuracy of GNSS positioning, is generated by electrons in Ionosphere. Solar activity level, region and time could make change of this delay level. Dual frequency receiver could effectively eliminate the delay using difference of refractive index between L1 to L2 frequency. But, Single frequency receiver have to use limited correction such as ionospheric model in standalone GNSS or PRC(pseudorange correction) in Differential GNSS. Generally, these corrections is effective in normal condition. but, they might be useless, when TEC(total electron content) extremely increase in local area. In this paper, monitoring algorithm is proposed for local ionospheric anomaly using multiple reference stations. For verification, the algorithm was performed with specific measurement data in Ionospheric storm day (20. Nov. 2003). this algorithm would detect local ionospheric anomaly and improve reliability of ionospheric corrections for standalone receiver.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.4
• /
• pp.225-233
• /
• 2011

In this paper, we propose a remote control station based on the awareness of various combat field situation in order for operating multiple unmanned ground vehicles. Our remote control station is capable of sending a variety of messages designed for carrying out the skillful movement for collaborate among unmanned ground vehicles, gathering the information related with combat field situation, and completing the assigned missions which are described by operator in advance. To verify the effectiveness of our proposal, we develop the sophisticated remote control station and conduct a great many remote operating tests for multiple unmanned ground vehicles.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.401-407
• /
• 2018

The transmission bandwidth of shorted-monopole antenna in the frequency range of LF and MF was analyzed and the transmission mode considering the permissible data rate dependant on the transmission bandwidth was analyzed in this paper. Based on the required ERP, the output power of transmitter was deduced by considering the antenna efficiency. The analyses are for DGPS and time information transmission system in the frequency range of 283.5kHz and 65kHz respectively. The transmission antenna was modeled as TLM antenna that designed in the limited antenna site. The antenna equivalent circuit and antenna bandwidth were deduced based on the simulation analysis of antenna characteristics. The analyzed antenna bandwidth was compared with the simulated antenna bandwidth. Also the transmission mode for transmitter of LF and MF was proposed by considering the antenna bandwidth.

• Journal of Korean Society for Geospatial Information Science
• /
• v.25 no.2
• /
• pp.21-29
• /
• 2017

For the efficient and stable operation of autonomous vehicles or advanced driver assistance systems being actively studied nowadays, it is important to determine the positions of the vehicle accurately and economically. A satellite based navigation system is mainly used for positioning, but it has a limitation in signal blockage areas. To overcome this limitation, sensor fusion methods including additional sensors such as an inertial navigation system have been mainly proposed but the high sensor cost has been a problem. In this work, we develop a vehicle position estimation algorithm using in-vehicle sensors and a low-cost imaging sensor without any expensive additional sensor. We determine the vehicle positions using the velocity and yaw-rate of a car from the in-vehicle sensors and the position and attitude of the camera based on the single photo resection process. For the evaluation, we built a prototype system, acquired test data using the system, and estimated the trajectory. The proposed algorithm shows the accuracy of about 40% higher than an in-vehicle sensor only method.

• Journal of Advanced Navigation Technology
• /
• v.18 no.6
• /
• pp.555-561
• /
• 2014

Data processing service via internet help user to get the GNSS data processing result more precise and easily. Thus, online data process system is operated and developed by various research groups and national. But this service is difficult to use in domestic cadastral survey. In this study, we developed the online data processing system for a domestic cadastral survey. This is calculated coordinate using NGII CORS(SUWN) fiducially. And use PPP technique by GIPSY-OASIS. If user choose the observation data which want to calculate the coordinate, then is uploaded to GIPSY-OASIS server through FTP. After upload is complete, server automatically calculate coordinate, and send the report about result using e-mail. And it takes 2 minutes runtime on the basis of the 3 sessions. To verify the result, we used the data on SOUL, JUNJ as compared with notified-coordinate from NGII. As a result, got the difference for east-west 1.4 cm, north-south -1.0 cm, vertical 0.5 cm.

• Journal of Advanced Navigation Technology
• /
• v.23 no.6
• /
• pp.535-541
• /
• 2019

In this paper, scripts for estimating the reference orbits of navigation satellites were developed and their performance was analyzed as a preliminary study for the development of the Korean GPS precise orbit determination technology. The JPL Flinn AC's data processing strategy was applied and Linux-based scripts were developed using GIPSY-OASIS. For the analysis of the accuracy of the estimated reference orbit, the precise orbit provided by the international GNSS data center was used as the truth. As a result, estimated satellite coordinates showed almost exactly same patterns and trends with the reference precise orbits, and their differences are in the range of ±2 cm. The average error between the two orbits was less than 1 cm in the 3D direction, while the standard deviation was also at 1 cm. From these, we found that the developed scripts have excellent performance in precise orbit determination.