• Journal of Powder Materials
• /
• 제30권6호
• /
• pp.516-520
• /
• 2023

Highly safe lithium-ion batteries (LIBs) are required for large-scale applications such as electrical vehicles and energy storage systems. A highly stable cathode is essential for the development of safe LIBs. LiFePO₄ is one of the most stable cathodes because of its stable structure and strong bonding between P and O. However, it has a lower energy density than lithium transition metal oxides. To investigate the high energy density of phosphate materials, vanadium phosphates were investigated. Vanadium enables multiple redox reactions as well as high redox potentials. LiVPO₄O has two redox reactions (V⁵⁺/V⁴⁺/V³⁺) but low electrochemical activity. In this study, LiVPO₄O is doped with fluorine to improve its electrochemical activity and increase its operational redox potential. With increasing fluorine content in LiVPO₄O_1-xF_x, the local vanadium structure changed as the vanadium oxidation state changed. In addition, the operating potential increased with increasing fluorine content. Thus, it was confirmed that fluorine doping leads to a strong inductive effect and high operating voltage, which helps improve the energy density of the cathode materials.

• Composites Research
• /
• 제36권5호
• /
• pp.342-348
• /
• 2023

There has been increasing demand for real-time monitoring of body and ambient temperatures using wearable devices. Graphene-based thermistors have been developed for high-performance flexible temperature sensors. In this study, the temperature coefficient of resistance (TCR) of monolayer graphene was controlled by coating polyethylenimine (PEI) on graphene surfaces to enhance its temperature-sensing performances. Monolayer graphene grown by chemical vapor deposition (CVD) was wet-transferred onto a target substrate. To facilitate the interfacial doping by PEI, the hydrophobic graphene surface was altered to be hydrophilic by oxygen plasma treatments while minimizing defect generation. The effect of PEI doping on graphene was confirmed using a back-gated field-effect transistor (FET). The CVD-grown monolayer graphene coated with PEI exhibited an improved TCR of -0.49(±0.03) %/K in a temperature range of 30~50℃.

• Journal of Advanced Navigation Technology
• /
• 제27권6호
• /
• pp.798-803
• /
• 2023

In the industrial internet of things (IIoT) industry, including smart factories, there are many cases where electronic devices are complexly combined and installed due to the recent development of intelligent information technology. Electromagnetic waves generated from such complex facilities affect other devices and services, which can lead to safety issues. The problem such as electromagnetic interference (EMI) and electromagnetic compatibility (EMC) generated when controlling complex facilities is an essential element that must be solved, and the engineering basis for EMI and EMC must be established to foster the industry of complex facilities. Therefore, in this study, EMC & EMI engineering demonstration cases for solar power fixed facilities using the national standard guideline have been analyzed. The results show that the electromagnetic risk indices in the solar power facilities have been degraded up to control level, and a national EMC engineering system has been proposed for complex facilities.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제37권3호
• /
• pp.292-296
• /
• 2024

In this study, Iron (III) oxide-hydroxide (δ-FeOOH) was successfully synthesized using hydrogen peroxide (H₂O₂) as an oxidizing agent. The synthesis of δ-FeOOH was carried out by controlling the amount of H₂O₂, and pure δ-FeOOH was successfully synthesized in ranges from 0.2 mL to 0.6 mL of H₂O₂. The size of the synthesized δ-FeOOH particles was compared by controlling the amount of oxidant H₂O₂. The average particle size of the synthesized pure δ-FeOOH particles increased from 875.1 nm to 897.2 nm as the amount of H₂O₂ was increased. The optical properties of δ-FeOOH synthesized under these specific conditions were investigated. All δ-FeOOH showed a similar trend of increasing and decreasing light absorption from 800 nm to 400 nm, although there was a slight difference in the amount of light absorption, with the largest amount of light absorption at 410 nm. The band gap energy of δ-FeOOH through the Tauc plot method was about 2.1~2.2 eV when H₂O₂ was 0.2~1.4mL. With a sufficient small particle size, simple control of that particle size, and a small band gap energy enough to absorb light in the visible spectrum, δ-FeOOH could be useful in a variety of applications, including photoelectrochemistry and battery electrodes.

• Microbiology and Biotechnology Letters
• /
• 제39권1호
• /
• pp.29-36
• /
• 2011

Pseudomonas aeruginosa is an opportunistic pathogen that causes various infections on urinary track, cornea, respiratory track, and burn wound site, and mainly relies on quorum sensing (QS) for its virulence. To control the infectivity of P. aeruginosa, we previously synthesized the structural analogues of a major QS signal, N-3-oxododecanoyl homoserine lactone (3OC12-HSL) to use as a QS inhibitor. Two of them (5b and 5f) had been confirmed to have an inhibitory effect on LasR, a major QS signal receptor of P. aeruginosa in the screening by the recombinant Escherichia coli reporter. To further evaluate these compounds, we tested their efficacy to control the QS and virulence of P. aeruginosa. Unlike the result from E. coli reporter, both 5b and 5f failed to affect the LasR activity in P. aeruginosa, but instead they selectively affected the activity of QscR, another 3OC12-HSL receptor of P. aeruginosa. Interestingly, their effect on QscR was complex and opposite to what we obtained with E. coli system. Both 5b and 5f enhanced the QscR activity at the low concentration range (< 10 ${\mu}m$), but high concentration of 5f (${\approx}$1 mM) strongly inhibited QscR. While 5b and 5f didn't affect the production of proteases, the key virulence factor, they significantly reduced the biofilm formation that is important in mediating chronic infections. Especially, 5f inhibited the initial attachment of P. aeruginosa, rather than the biofilm maturation. Based on our results, we suggest that 5f can be applied for an anti-biofilm agent without increasing virulence of P. aeruginosa.

• Korean Chemical Engineering Research
• /
• 제52권5호
• /
• pp.667-671
• /
• 2014

In this study, we suggest a facile method to control conditions of single component independently when preparing consisting two-component metal oxides nanofiber by simply dispersing nanoparticles in precursor solution. The well dispersed $SiO_2$ nanoparticles in $TiO_2$ nanofibers were successfully synthesized through a simple electrospinning process. The as-synthesized nanodfibers were investigated via FE-SEM, XRD and EDS for structural studies, furthermore, the analysis of UV-VIS and photocatalytic activity were carried out for demonstrate the effect of $SiO_2$ nanoparticles dispersed in $TiO_2$ nanofibers. As a result, $TiO_2$ nanofibres dispersed with $SiO_2$ nanoparticles have enhanced photocatalytic activity than that of $TiO_2$ nanofibres only. In this strategy, the introduction of $SiO_2$ nanoparticles in $TiO_2$ nanofibers were attribute to enlarge absorption in the visible region (380~440 nm). Additionally, $Br{\o}nsted$ acid sites generated in each metal oxide of Ti and Si increase OH radicals efficiently as well as it limit recombination loss by holding photogenerated electrons for high efficient photocatalytic activity.

• Journal of Life Science
• /
• 제30권9호
• /
• pp.813-818
• /
• 2020

The archaeal clusters of orthologous genes (arCOG) algorithm, which identifies common genes among archaebacterial genomes, was used to identify conservative genes among 168 archaebacterial strains. The numbers of conserved orthologs were 14, 10, 9, and 8 arCOGs in 168, 167, 166, and 165 strains, respectively. Among 41 conserved arCOGs, 13 were related to function J (translation, ribosomal structure, and biogenesis), and 10 were related to function L (replication, recombination, and repair). Among the 14 conserved arCOGs in all 168 strains, 6 arCOGs of tRNA synthetase comprised the highest proportion. Of the remaining 8 arCOGs, 2 are involved in reactions with ribosomes, 2 for tRNA synthesis, 2 for DNA replication, and 2 for transcription. These results showed the importance of protein expression in archaea. For the classes or orders having 3 or more members, genomic analysis was performed by averaging the distance values of the conservative arCOGs. Classes Archaeoglobi and Thermoplasmata of the phylum Euryarchaeota showed the lowest and the highest average of distance value, respectively. This study can provides data necessary for basic scientific research and the development of antibacterial agents and tumor control.

• Korean Chemical Engineering Research
• /
• 제52권6호
• /
• pp.796-806
• /
• 2014

The key for the commercial deployment of IGCC power plants or chemical (methanol, dimethyl ether, etc.) production plants based on coal gasification is their economic advantage over plants producing electricity or chemicals from crude oil or natural gas. The better economy of coal gasification based plants can be obtained by co-production of electricity and chemicals. In this study, we carried out the economic feasibility analysis on the process of co-producing electricity and DME (dimethyl ether) using coal gasification. The plant's capacity was 250 MW electric and DME production of 300,000 ton per year. Assuming that the sales price of DME is 500,000 won/ton, the production cost of electricity is in the range of 33~58% of 150.69 won/kwh which is the average of SMP (system marginal price) in 2013, Korea. At present, the sales price of DME in China is approximately 900,000 won/ton. Therefore, there are more potential for lowering the price of co-produced electricity when comparing that from IGCC only. Since the co-production system can not only use the coal gasifier and the gas purification process as a common facility but also can control production rates of electricity and DME depending on the market demand, the production cost of electricity and DME can be significantly reduced compared to the process of producing electricity or DME separately.

• Journal of Food Hygiene and Safety
• /
• 제24권3호
• /
• pp.273-276
• /
• 2009

We investigated eight active natural antimicrobials for preservation of functional beverages that are usually degraded by yeasts rather than by bacteria due to a high sugar content and a low pH. Five strains of yeasts (S. cerevisiae, Z. bailii, P. membranaefaciens, C. albicans, and P Anomala) were tested with eight natural antimicrobial agents ($\varepsilon$-polylysine, yucca extract, vitamin $B_1$ derivative, scutellaria baicalensis extract, chitooligosaccharid, allyl isothiocyanate, sucrose-fatty acid ester, and oligosaccharide). The lowest minimal inhibitory concentrations (MIC) were 10 ppm for oligosaccharide and sucrose-fatty acid ester against S. cerevisiae and Z. bailii, 10 ppm for allyl isothiocynate against P. membranaefaciens and C. albican, and 10 ppm for allyl isothiocynate and oligosaccharide against P. anomala. No growth were observed for five kinds of yeasts in functional beverages containing sodium benzonate at concentration of 0.015% or higher. The resistance of S. cerevisiae, Z. bailii, and P. Anomala against natural antimicrobial agents was lower than those of P. membranaefaciens and C. albican. Allyl isothiocyanate, oligosaccharide, and sucrose-fatty acid ester showed the highest antimicrobial activities among the eight tested antimicrobials. These results can be applied to develop new natural antimicrobial agents to improve microbial quality of functional beverages.

• Korean Journal of Materials Research
• /
• 제2권1호
• /
• pp.3-11
• /
• 1992

Aluminum sulfate hydrate was prepared using sulfuric acid from Ha-dong kaolin. The effects of calcination-temperature and calcination-time of kaolin, reaction-temperature and reaction-time, and sulfuric acid concentration on the formation of aluminum sulfate hydrate were investigated. The precipitation condition of aluminum sulfate hydrate from sulfuric acid solution was determined. Also, the products heat-treated at different temperatures have been investigated by X-ray diffraction, thermogravimetry, differential thermal analysis, Fourier transform infrared spectrophotometer, scanning electron microscopy, particle size distribution analysis and chemical analysis. In the optimum condition, the conversion of aluminum oxide in kaolin to aluminum sulfate hydrate was 60%. From the results of XRD, TG-DTA, and FT-IR, it is suggested that the aluminum sulfate hydrate is thermally decomposed as follows ; $Al_2(SO_4)_3{\cdot}18H_2O{\rightarrow}Al_2(SO_4)_3{\cdot}6H_2O{\rightarrow}Al_2(SO_4){\rightarrow}\;amorphous\;alumina{\rightarrow}{\gamma}-alumina{\rightarrow}{\delta}-alumina{\rightarrow}{\theta}-alumina{\rightarrow}{\alpha}-alumina$. The purity of alumina powder prepared by calcining aluminum sulfate hydrate at $1200^{\circ}C$ was 99.99 percent.