• The Journal of the Convergence on Culture Technology
• /
• v.5 no.4
• /
• pp.445-450
• /
• 2019

Recently, consumers using cosmetics have a great interest in raw material safety. Among them, interest in natural preservatives is increasing, and as the demand for cosmetics excluding paraben preservatives increases, a method of replacing synthetic preservatives with antibacterial essential oils is being considered. The antibacterial effect of essential oils depends on the components, concentrations and interactions between the main active compounds. Effective preservatives should have antimicrobial activity against a wide range of strains even at minimal concentrations. All preservatives should be considered to increase skin concentration and cause skin irritation and allergic reactions. Consumers recognize that essential oils from nature are safe, but some should be careful because they can cause contact allergies or phototoxic reactions. As such, it is important to balance natural preservatives with maximum preservative effects and low toxicity. This paper describes the characteristics of essential oils focused on antibacterial properties, efficacy and safety as cosmetic preservatives.

• Clinical and Experimental Reproductive Medicine
• /
• v.32 no.2
• /
• pp.101-111
• /
• 2005

배 경: Pituitary adenylate cyclase-activating polypeptide (PACAP)은 양의 시상하부에서 추출된 신경펩타이드 호르몬으로 난소에도 존재하여 배양된 과립막 세포에서 스테로이드합성과 cyclic AMP 형성을 촉진함이 보고되었다. 목 적: 흰쥐 난소를 실험 모델로 사용하여 배란시 황체화호르몬 (luteinizing hormone; LH)에 의해 유도된 PACAP과 PACAP 수용체의 유전자 발현양상과 신호 전달경로를 규명하고자 하였다. 재료 및 방법: 미성숙 흰쥐의 배란전 난포를 체외 배양하면서 LH로 처리하고 PACAP 및 PACAP수용체의 유전자 발현을 보기 위해서는 Northern blot 분석과 in situ hybridization (ISH)을, 그리고 단백질 수준의 PACAP 검색을 위해서는 enzyme linked immunosorbent assay (ELISA) 분석을 이용하였다. 결 과: LH 처리 후 Northern blot상의 PACAP 유전자 발현은 6~9시간에 일시적으로 최고치에 도달하였으며 ISH로 보아 과립막 세포에서 발현됨을 알 수 있었다. ELISA 분석 상 PACAP 단백질도 LH처리 후 6~12시간에 최고치를 나타내었으며, PACAP 수용체 mRNA 역시 3~9시간에 최고치로 과립막 세포에서 발현되었다. Adenylate cyclase (AC) 억제제인 MDL12330A 처리시 LH로 발현된 PACAP mRNA가 감소되며, AC의 활성제인 forskolin 처리에는 LH시와 유사한 PACAP mRNA의 발현양상을 나타내었다. 그러나 protein kinase C (PKC)의 억제제인 chelerythrine과 2-0-tetradecanolphorbol-13-acetate (TPA) 처리로는 PACAP 의 유전자 발현에 영향을 주지 못하였다. 5-lipoxygenase의 억제제인 MK886이나 nordihydroguaiaretic acid (NDGA)로 처리한 결과 LH로 유도된 PACAP 유전자의 발현이 감소되었으나, cyclooxygenase의 억제제인 indomethacin은 별로 영향을 주지 못하였다. MEK와 p38의 억제제인 PD98059와 SB203580도 LH로 촉진 된 PACAP의 유전자 발현을 농도 의존적으로 억제하였다. 결 론 : 배란전 난포에서 PACAP과 PACAP 수용체의 유전자 발현은 모두 LH의 폭발적 분비에 의해 유도되어 일시적으로 과립막 세포에서 나타나 배란을 위한 국소적인 조절 작용을 할 것으로 추정되며, LH로 촉진된 PACAP 유전자 발현을 위한 신호전달은 cAMP-PKA, lipoxygenase 및 MAP kinase 경로를 통하는 것으로 사료된다.

• Polymer(Korea)
• /
• v.38 no.1
• /
• pp.9-15
• /
• 2014

Polyamide4 (PA4)-polyurethane (PU)-PA4 triblock copolymers were synthesized by isocynated (NCO)-terminated PU prepared from 4,4'-diphenyl methane diisocyante (MDI) and polytetramethylene glycol (PTMG) as an initiator and potassium pyrrolidonate (P-py) as a catalyst for anionic ring opening polymerization of 2-pyrrolidone. Subsequently copolymer was controlled to contain different or same molecular weight of PA4 hard block with same or different molecular weight of PU soft block in order to investigate the effects of those differences on various properties of triblock copolymers as a thermoplastic elastomer. As the results shown in typical properties of block copolymeric elastomers, the mechanical strength and melting point ($T_m$) of the copolymers increased with an increase in molecular weight of PA4 block while the elongation at break increased with an increase in that of PU block.

• YAKHAK HOEJI
• /
• v.29 no.2
• /
• pp.62-69
• /
• 1985

The isomeric intermediates, $3{\alpha}$and $3{\beta}-amino-5{\alpha}-cholestane required for the synthesis of N-nitrosoureas, N-(2-chloroethyl)-N-nitrosocarbamoyl-$3{\alpha}-amino-5{\alpha}$-cholestane (9), N-methyl-N-nitrosocarbamoyl-3${\alpha}-amino-5{\alpha}-cholestane$ (10), N-(2-chloroethyl)-N-nitrosocarbamoyl-$3{\beta}-amino-5{\alpha}-cholestane$: (7), and N-methyl-N-nitrosocarbamoyl-$3{\beta}-amino-5{\alpha}-cholestane$ (8) were obtained through the $LiAlH_{4}$ reduction of $5{\alpha}$-cholestan-3-one oxime, followed by the chromatographic separation: the assignment of the stereochemistry of both isomers were based on the shape and chemical shift of $C_{3}$-proton resonances on their NMR spectra and on the elution mobility on the TLC. The urea intermediates, N-(2-chloroethyl) carbamoyl-3.alpha.-amino-5.alpha.-cholestane (13), N-methylcarbamoyl-$3{\alpha}-amino-5{\alpha}-cholestane$ (14), N-(2-chloroethyl) carbamoyl-$3{\beta}-amino-5{\alpha}-cholestane (11) and N-methyl-$3{\beta}-amino-5{\alpha}$-cholestane (12) were prepared by the treatment of each isomers ($3{\alpha}$-amino-and $3{\beta}-amino-5{\alpha}$-cholestane) with alkyl isocyanates in anhydrous $CHCl_{3}$, and the corresponding nitrosoureas, 7-10 were obtained by the nitrosation of the ureas, 11-14, with AcOH (or HCOOH)/$NaNO_{2}$ in ice-cold condition. The inhibitory activity of the nitrosoureas, 7-10, and their intermediates, 12-14 towards the growth of L1210 murine leukemia cells, were examined. Among them, the compounds 9 and 10 exhibited high activity having $ED_{50}$ to be 5.5g/ml and 6.1g/ml, respectively.

• Food Engineering Progress
• /
• v.13 no.4
• /
• pp.243-250
• /
• 2009

Pravastatin sodium, competitive inhibitors of HMG-CoA(3-hydroxy-3-methylglutaryl coenzyme A) reductase, is produced from the culture broth of Streptomyces carbophilus KCCM 10370, The production of Pravastatin sodium was increased about 45 fold compared to wild type by UV mutation. Production of Pravastatin was also improved by continuous feeding of Compactin sodium to 24% and bioconversion ratio was also increased to 4.3% by intermittent addition. In main culture, concentration of Compactin sodium was kept less than 0.1%(w/v) under continuous feeding of Compactin sodium then product was 0.49% and bioconversion was 70%. After finishing the fermentation, Pravastatin was purified by various chromatographies such as Diaion HP20 resin column, Partition, and ODS(Octa-Decylsilyl Silicagel) resin column with a final yield of 70~72% and over 99.7% purity. The IR, UV, and NMR study of the purified Pravastatin sodium showed the same pattern as that of EP(European Pharmacopoeia).

• Journal of the Korea Convergence Society
• /
• v.10 no.1
• /
• pp.285-290
• /
• 2019

AHR regulates the expression of xenobiotics metabolizing enzymes (XMEs) as a transcription fact upon binding of ligands that are mainly aryl hydrocarbons. The role of AHR in human physiology has been intensively investigated for the past decades, however our understanding on AHR yet to be elucidated largely due to the lack of proper chemical agents. It has been demonstrated that AHR correlates to pathogenesis for some diseases in recent studies suggesting that the study on the AHR may provide a valid therapeutic target. Classical antagonists in current use are reported to be partially agonistic whereas a pure antagonist is yet to be found. In this study, phenyldiazenylaniline has been designed based on the structure of two known AHR antagonist, Resveratrol and CH223191. The derivatives of phenyldiazenylaniline have been prepared and subjected to assessment as an AHR antagonist in order to optimize the AHR antagonistic activity of the designed structure by means of convergence study of organic synthesis and molecular biology.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.1
• /
• pp.59-65
• /
• 2019

In this study, optimal design of direct-drive VCMs (Voice Coil Motor) for a missile fin actuator is carried out. The torque performance and the characteristics of the VCM are predicted by commercial electromagnetic analysis software, ANSYS Maxwell. The optimal design is obtained at the minimum and maximum actuating angles where the aerodynamic load acting on the fin is the largest in the operating range. The critical variables of the actuator is designed and the RSM (Response Surface Method) is used for the optimization. The response surface model consists of second-order functions and its experimental points are selected by a central composite design. This design is widely used for fitting a second-order response surface. The adjustment regression coefficients is computed for adequacy checking of the response surface model. Finally, the torque values obtained by the RSM and the ANSYS Maxwell are shown in good agreement.

• Journal of Adhesion and Interface
• /
• v.19 no.4
• /
• pp.154-162
• /
• 2018

Plasma treatment and corona treatment have been used for surface modification of polydimethylsiloxane (PDMS) film by activating its surface with the -OH group. Adhesion promoter or coupling agent was also used to improve adhesion of PDMS film with various materials. However, obtained hydrophilicity onto the surface of PDMS films with those processes was transient and vulnerable. In this study, a new alkoxysilane-functionalized acrylic polymer precursor was first synthesized by copolymerization process, and then was reacted with HO-terminated PDMS through condensation reaction to prepare a new surface modifier for PDMS film. The structure and molecular weight of the prepared surface modifier were confirmed by 1H-NMR and GPC measurement. Surface properties of surface modifier-coated PDMS films were also investigated by using XPS, ATR and WCA analysis. The adhesion between the PDMS film and the surface modifier was tested using cross-cut test.

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.467-471
• /
• 2021

A ladder-like polysilsesquioxane (LPMA64) functionalized with a crosslinkable group was synthesized and used for the preparation of organic-inorganic hybrid gel polymer electrolytes through a thermal crosslinking process of the liquid electrolytes. A small weight percent of LPMA64 polymer crosslinker (5 wt%) was able to form a well-developed network structure, resulting in good dimensional stability with high ionic conductivity. The lithium-sulfur batteries fabricated with organic-inorganic hybrid gel polymer electrolytes exhibited stable C-rate and cycling performance with excellent Coulombic efficiency due to the alleviated lithium polysulfide shuttling effect during prolonged cycling. The result demonstrates that the organic-inorganic hybrid gel polymer electrolytes could be a promising candidate electrolyte for application in lithium-sulfur batteries.

• Membrane Journal
• /
• v.31 no.3
• /
• pp.184-199
• /
• 2021

As a branch of covalent organic frameworks (COF), covalent triazine frameworks (CTF) are inherently porous structures composed of networks of repeating hexagonal triazine rings fabricated via the ionothermal trimerization reaction. They also contain plenty of nitrogen functional groups that increase affinity for some chemicals while rejecting others. Because of their tunable properties, many researchers have synthesized and tested CTFs for gas and liquid separation processes. Various studies of novel CTFs, mixed CTF composites, and CTF membranes have experimented for gas adsorption/separation (e.g., CO₂, C₂H₂, H₂, etc.) and desalination. Some CTF studies have determined the limits and potentials through advanced computer simulations while subsequent experiments have tested CTFs for photocatalytic properties, suggesting recyclability for greater sustainability. In this review, the covalent triazine framework-based separation membrane is discussed.