• Journal of the Korean Applied Science and Technology
• /
• v.32 no.4
• /
• pp.712-717
• /
• 2015

In this study, the experiment of CO production was performed using carbon dioxide and coal. The synthesis characteristics of CO gas was investigated using the chemical activation method of KOH. The preparation process has been optimized through the analysis of experimental variables such as activating chemical agents to coal ratio, the flow rate of gas and reaction temperature during $CO_2$ conversion reaction. Without the catalyst of KOH, the 66.7% of $CO_2$ conversion was obtained at the conditions of $T=950^{\circ}C$ and $CO_2$ flow rate of 300 cc/min. On the other hand, the 98.1% of $CO_2$ conversion was obtained using catalyst of KOH at same conditions. It was found that the feed ratio(Coal : KOH = 4 : 1) had better $CO_2$ conversion and CO selectivity than other feed ratios.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.2
• /
• pp.111-120
• /
• 2009

The conceptual cost estimation used the construction project needs for confirm budget not only at the planning phase but also at the preliminary design phase of the construction project. Present, the conceptual cost estimation model have problems the rate of error is very large because the linear simple model calculate by use the cost of the unit meter or the unit square. This study development the model used grouping and the key quantity method, the mixed unit cost for solve problem of the very large rate of error. The result of this study reduced difference of between the real design construction cost therefor it expect that contribute to the client or the service company estimate budget of RC rahmen bridge.

• The Korean Journal of Zoology
• /
• v.25 no.2
• /
• pp.55-62
• /
• 1982

DNA synthesis, unscheduled DNA synthesis, excision of pyrimidine dimers and phtoreactivation were determined in UV-irradiated differentiating muscle cells at various times of primary culture of 12 day chick embryos and results obtained were as follows. The rates of UV-induced unscheduled DNA synthesis were increased as increase of UV dose. And the rates were gradually decreased as the increase of time after culture, but at higher doses the decreasing tendency was remarkable. The patterns of DNA replication were changed drastically as a function of time so that in the seven day cultures the rate of $^3$H-thymidine incorporation was found to be 0.2% of the original activity. The pattern of inhibition of DNA replication by UV damage demonstrated that in cells of earlier stages there were no remarkable changes, but in cells of later stages there was significant fluctuation. Photoreactivation and the excision of pyrimidine dimer in the one day cultures showed that photoreactivation occurred immediately after UV-irradiation, but excision of pyrimidine dimer was gradually and slowly occurred. These results indicate that the differentiation of embryonic muscle cells accompanies the gradual reduction of DNA replication and unscheduled DNA synthesis, and that the photoreactivation is rapid process compared to excision repair.

• Korean Journal of Microbiology
• /
• v.30 no.5
• /
• pp.377-382
• /
• 1992

The responses of C. jejuni to ethanol shock were studied for their survival. synthesis of ethanol shock proteins, and increased survival at higher concentration of ethanol upon prior treatments of ethanol. When C. jejuni were shocked with ethanol at 1. 3. and 5% for 60. 30 and 10 minutes, respectively. those cells synthesized the ethanol shock proteins of 90, 66, 60, 45, and 24 kd in molecular weight. When the C. ,jejuni shocked with 1 and 3% ethanol were exposed to 3 and 5% ethanol for 30 minutes. their survival rates were increased by $10^1$~$10^2$ as compared with those of the cells without ethanol-shock. In the same way. C. ,jejuni shocked with 5% ethanol for 10 minutes :.bowed about 102 times higher survival rates than the cells without ethanol-shock. This result suggests that C jejuni shocked with I-5% ethanol for 10-30 minutes synthesized five kinds of ethanol shock proteins. and that the shock proteins contributed to increase ethanol tolerance for their survival at the higher concentrations of ethanol.

• Fire Science and Engineering
• /
• v.27 no.4
• /
• pp.41-46
• /
• 2013

The present study has been conducted to investigate the reaction kinetics and pyrolysis parameters for flame propagation analysis of furniture material components. TGA measurement for component materials such as MDF (medium density fiberboad) panel including coating material, synthetic leather and foam cushion are performed under maximum temperature of $600^{\circ}C$ and heating rate of $10^{\circ}C/min$. The results of TGA have shown that the peak temperature of MDF panel was $324^{\circ}C$ and the initial peak temperature of coating material decreased by $270{\sim}280^{\circ}C$. In the case of synthetic leather and foam materials, the reference temperature and reference rate depend on the type of polymer consisting the sample, the initial kinetic characteristics was classified into 2 categories of about $270^{\circ}C$ and $420^{\circ}C$ of reference temperature for the tested synthetic materials. The present study showed the pyrolysis parameters of reference temperature and reference rate proposed by Lyon to evaluate the pre-exponential factor and activation energy. The present study can contribute to improve the reliability of computational fire analysis and enhance the understanding of fire propagation phenomena based on the thermal properties study of material.

• Resources Recycling
• /
• v.9 no.3
• /
• pp.3-12
• /
• 2000

A Study on the cementation for the recovery of Cu, Ni and Co with Mn metallic powders in leaching solution from the manganese nodule that have removed Fe ions was studied. The results showed that the recovery efficiencies of metal ions with Mn powders increased when the temperature, pH and the concentration of chloride ions were increased in mixed solution. And the recovery efficiencies of Cu was 98% and not changed with the addition amounts of Mn powders but, in case of Co and Ni, the recovery efficiencies were increased with the addition amounts. The particle size of precipitate was about $5\mu\textrm{m}$. From the results of experiment we proposed the two-step cementation process for the recovery of Cu, Ni and Co with Mn powders.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2002.11a
• /
• pp.113-115
• /
• 2002

Two experiments were conducted to compare the effects of the natural and the synthetic commercial pigments on the laying performance, pigmentation and fatty acid contents in egg Yolk of laying hens. Feed intake, egg production, egg weight and feed efficiency did not have significant difference(p〈0.05) in experiments I and II. White height and haugh unit did not have significant difference(p〈0.05) in two experiments. In order to approach the yolk pigmentation to 12∼13 of Roche color fan, addition level of natural red pigment was 25∼30 ppm. In the case of synthetic red pigment, the level was 15∼20 ppm. In this experimental condition, the pigmenting effect of the synthetic pigment had better than that of the natural pigment. In the experiment 2, the Pigmenting effect of mixing Pigments were inveatigated between TM2 mixed with natural red pigment, and TM6 mixed with synthesis red pigment. The fatty acid content in yolk was not affected by pigment addition.

• Applied Chemistry for Engineering
• /
• v.24 no.4
• /
• pp.391-395
• /
• 2013

In this study, zinc oxide (ZnO) nano powder, well known as an UV absorbing material, was synthesized with three synthetic conditions by the hydrothermal method. After ZnO nano powder was surface-modified with various silane coupling agents to improve dispersion property, a dispersion sol was prepared with dispersant for 72 h by the ball-milling of surface-modified ZnO nano powder. The dispersion sol, prepared by modifying the surface of the ZnO nano powder with an average size of about 30 nm using 3-chloropropyl trimethoxy silane, showed an excellent dispersion stability with a high UV-shielding and visible trnasparency.

• Journal of Biomedical Engineering Research
• /
• v.23 no.3
• /
• pp.243-251
• /
• 2002

Synthetic zinc wave employs Pulsed plane wave as transmit beam with linear time delay curve. The received echoes in different transmit directions at different transmit times are superposed at imaging Points with Proper time delay compensation using synthetic focusing scheme. This scheme. which uses full aperture in transmit, obtains a high SNR image, and also features high lateral resolution by using two way dynamic focusing at all imaging depths. In this Paper, we consider the Problems in realization of synthetic zinc wave. Also. we have applied the scheme to obtain phantom and in-vivo images using a linear array of 5 MHz. In phantom test. experimental images show high resolution over a more extended imaging depth than conventional fixed Point transmit and receive dynamic focusing schemes In-vivo images show that the resolution could not overcome conventional focusing systems because of motion blurring and(or) aberration of tissue. but the frame rate tan be increased by a factor of more than 5 compared to conventional focusing schemes. with competitive resolution at all imaging depths .

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.5
• /
• pp.64-71
• /
• 2018

This paper provides the results for experimental study on longitudinal shear performance for new-concept composite slabs embedded with silence insulator. Longitudinal shear capacity tests are used to predict characteristics of composite action between the concrete block, silence insulator and deckplate. A total set of 7 Push-Down specimens are tested to clarify the composite action between the concrete block, silence insulator and deckplate. Parameters in this study are the width of T-type bar, the depth of reinforced bar and the thickness of silence insulator. The results from experimental study on longitudinal shear capacity for new-concept composite slabs applied T-type bar, Reinforced bar and Silence insulator are summarized as follows. In test result, the Longitudinal Shear Capacity of the new concept specimen is 2 times excellent than basic specimen with safety. It is expected that applying the proposed composite slab detail at the actual site will provide a significant safety factor in structural aspect of the existing composite slab, and greatly contribute to the improvement capacities of resisting vibration and sound.