DOI QR코드

DOI QR Code

An Experimental Study on Longitudinal Shear Capacity of Composite Slab Embedded with Silence Insulator

방음재를 삽입한 합성슬래브의 수평전단성능에 관한 실험적 연구

  • 이선근 (부산대학교, 건축공학과) ;
  • 이치형 (부산대학교,생산기술연구소) ;
  • 윤성기 (부산대학교, 건축공학과)
  • Received : 2018.05.16
  • Accepted : 2018.08.20
  • Published : 2018.09.01

Abstract

This paper provides the results for experimental study on longitudinal shear performance for new-concept composite slabs embedded with silence insulator. Longitudinal shear capacity tests are used to predict characteristics of composite action between the concrete block, silence insulator and deckplate. A total set of 7 Push-Down specimens are tested to clarify the composite action between the concrete block, silence insulator and deckplate. Parameters in this study are the width of T-type bar, the depth of reinforced bar and the thickness of silence insulator. The results from experimental study on longitudinal shear capacity for new-concept composite slabs applied T-type bar, Reinforced bar and Silence insulator are summarized as follows. In test result, the Longitudinal Shear Capacity of the new concept specimen is 2 times excellent than basic specimen with safety. It is expected that applying the proposed composite slab detail at the actual site will provide a significant safety factor in structural aspect of the existing composite slab, and greatly contribute to the improvement capacities of resisting vibration and sound.

본 연구는 방음재를 삽입한 새로운 개념의 합성슬래브 시스템을 제안하고, T-형 바의 폭, 전단보강 철근의 설치 등을 실험의 주요변수로 한 총 7개의 실험체를 제작 Push-Down실험방법으로 수행한 수평전단성능에 대한 실험 결과를 제공하고 있다. 실험결과 T-형 바를 전단키로 적용하고 방음재를 삽입한 실험체가 기본실험체에 비해 수평전단성능에서 2배 이상 우수한 것으로 나타났다. 이는 제안한 합성슬래브상세를 실제 현장 적용하여도 기존의 합성슬래브 보다 구조적 측면에서 상당한 안전율을 확보할 것으로 생각되며, 내진동 및 방차음의 개선에도 크게 기여할 것으로 판단된다.

Keywords

References

  1. 국토해양부 고시 제 2015 - 319호, 소음방지를 위한 층간 바닥충격음 차단 기준, 국토해양부, 2015.
  2. 합성데크 바닥구조 설계기준(안) 및 해설, 대한건축학회, 1998.
  3. Eurocode 4 (2004), Design of Composite Steel and Concrete Structure Part 1-1- General Rules and Rules for Buildings, CEN.
  4. ACI 318-95(1995), Building Code Requirements for Reinforced Concrete, American Concrete Institute, Farmington hills, Mich.
  5. ANSI/ASCE 3-91(1992), Standard for the Structural Design of Composite Slabs, American Society of Civil Engineers, New York.
  6. ANSI/ASCE 9-91(1992), Standard Practice for Construction and Inspection of Composite Slabs, American Society of Civil Engineers, New York.
  7. Daniels, B.J. and Crisinel, M. (1993), Composite Slab Behaviour and Strength Analysis, Part I; Calculation Procedure, Journal of Structural Division Proceedings of the ASCE, vol.119, No.ST1.
  8. Poter, M . L., et al, (1976), Shear-bond analysis of steel deck reinforced slabs, Journal of the structural Division Proceedings of the ASCE, vol102, No ST12.
  9. Huh choong, (1997), A Study on the Structural Behaviour and Strength of the Composite Slabs with the Metal Deckplate, thesis presented to Han yang University, seoul.
  10. Johnson RP.(2004), Composite structures of steel and concrete. 3rd ed. Oxford, UK: Blackwell Scientific Publishing.
  11. Daniels, B. J. (1988). Shear Bond Pull-Out Tests for Cold Formed Steel Composite Slabs. ICOM 194, Ecole Polytechnique Federale de Lausanne.
  12. Lee jeungyoon, (2013), Reinforced Concrete structure, 2nd ed, Korea : Donghwa Publishing.