• Journal of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.588-592
• /
• 1988

A chiral recognition was observed in aminolysis of 3-acyl-4(S)-isopropyl-1,3-thiazolidine-2-thione by racemic amine to give an optically active amide (S-excess) and amine (R-excess). This procedure can be applied to synthesis of macrocyclic diamide macrocyclic spermidine alkaloid, and peptide. The rate of this aminolysis is remarkably affected by steric surrounding; completion of reaction can be easily judged by the disappearance of the original yellow color of 4(S)-AITT. These features of the aminolysis suggested a potential recognition racemic amines by a chiral 4 (S)-AITT derivative. Thus 4 (S)-AITT was synthesized from 4 (S)-isopropyl-1, 3-thiazolidine-2-thione and carboxylic acids.

• Polymer(Korea)
• /
• v.28 no.6
• /
• pp.538-544
• /
• 2004

Polyurethanes containing L-lysine segments in the main chain (PULL) were synthesized from 4,4'-diphenymethyl diisocynate, poly(tetramethylene glycol), and z-lysine oligomer as a chain extender. Insulin-immobilized polyurethanes (PULL-In) were prepared by a coupling reaction of PULL surface amino groups with insulins. The amount of immobilized insulin was about 0.30 nmol/$\textrm{cm}^2$, as determined by Bradford method. The interactions of NIH/3T3 fibroblasts with surface-modified PULLs were investigated using $^3$H-thymidine incoporation and optical microscopy. The cell growth rate on PULL-In film was higher than those on other substrates. The cell proliferation by the immobilized insulin was almost same as that by the free one.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.1 s.33
• /
• pp.1-6
• /
• 2005

White light emission is very important for applying electroluminescent device to full display, backlight and illumination light source. In this letter, Multilayer molecular organic white-light-emitting device using thin nim of blue material nitro-DPVT with fluorescent dye Rubrene for an orange emission were fabricated. The basic structure of the fabricated device is a-NPD / nitro-DPVT / nitro- DPVT:Rubrene / BCP/ Alq3. Aluminum is used as the cathode material and ITO was anode material. The white light emission spectrum covers a wide range of the visible region and the Commission Internationale do I'E clairage (C.I.E.) coordinates of the emitted light was ((0.3347, 0.3515) at 14V. The turn voltage is as low as 2.5V and quantum efficiencies are $0.35\%$.

• Korean Journal of Materials Research
• /
• v.7 no.12
• /
• pp.1047-1051
• /
• 1997

CH$_{4}$와 H$_{2}$의 혼합가스에 미량의 질소와 산소를 첨가하여 rf-플라즈마 CVD법으로 DLC막을 합성하였다. 이 때 챔버내 압력은 430mtorr, 기판에 인가된 전력은 80W였으며, H$_{2}$와 CH$_{4}$의 비율은 1:1이었다. 이 시편들에 대해 가시광선 영역과 자외선 영역에서의 투과도를 비교하였으며, 결합구조의 변화를 알아보기 위하여 FTIR 분석을 실시하였다. 질소의 경우 첨가량이 6.3%에서 17.4%으로 증가됨에 따라 전체적인 투과도값이 증가하였으며, FRIR 분석결과 wavenumber 3500 $cm^{-1}$ /의 위치에 N-H stretching band가 나타나고 2300$cm^{-1}$ /에는 nitrile의 피크가 나타났다. 이 피크들의 존재는 질소의 첨가에 의하여 interlink를 감소시킴으로써 막의 잔류응력을 현저히 감소시킬 수 있음을 의미한다. 2% $O_{2}$를 첨가한 경우 막의 투과도는 질소를 첨가한 경우보다 월등히 더 향상되었다. 질소첨가량을 증가시킴에 따라 optical band gap또한 증가되는 경향을 보였으며, 2% $O_{2}$를 첨가하였을 때 막의 optical band gap은 0.5까지 감소하였다.

• Journal of Powder Materials
• /
• v.19 no.3
• /
• pp.177-181
• /
• 2012

Copper composite materials have attracted wide attention for energy applications. Especially $CuInS_2$ has a desirable direct band gap of 1.5 eV, which is well matched with the solar spectrum. $CuInS_2$ nanoparticles could make it possible to develop color-tunable $CuInS_2$ nanoparticle emitter in the near-infrared region (NIR) for energy application and bio imaging sensors. In this paper, $CuInS_2$ nanoparticles were successfully synthesized by thermo-decomposition methods. Surface modification of $CuInS_2$ nanoparticles were carried out with various semiconductor materials (CdS, ZnS) for enhanced optical properties. Surface modification and silica coating of hydrophobic nanoparticles could be dispersed in polar solvent for potential applications. Their optical properties were characterized by UV-vis spectroscopy and photoluminescence spectroscopy (PL). The structures of silica coated $CuInS_2$ were observed by transmission electron microscopy (TEM).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.465-465
• /
• 2008

Conjugated polymers have attracted much scientific and technological research interest during the past few decades because of their potential use such as polymer light-emitting diodes (PLEDs).1,2 Particularly, lots of phenylene-based polymers such as polyfluorene and its derivatives have been synthesized because of their high photoluminescence quantum efficiencies and thermal stabilities. However, troublesome long wavelength emission in polymer film of polyfluorenes on heating during device formation or operation has been the crucial problem for practical applications. The source of the long wavelength emission was initially believed to be solely due to excimer emission as a result of polymer aggregation. It has also recently been correlated with emissions from ketonic defects in the fluorene units. Many efforts have been made to reduce the tendency to red-shifted emission. Here, we report for the first time the design and synthesis of novel 9,9-spiro bifluornene-based polymers containing heteroatoms such as N, S in its molecular skeleton. Especially, the 9,9-spiro bifluornene-based polymers containing N atom showed stable blue electroluminescence, which did not show spectral change upon thermal annealing.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.46-47
• /
• 2006

Ga-doped ZnO nanowires have been synthesized by pulsed laser deposition (PLD) in furnace on gold coated (0001) sapphire substrates. The effect of repetition rate on structural and optical properties of Ga-doped ZnO nanowires are investigated. By controlling repetition rate, the diameter of nanowires is varied between about 60 and 100 nm, and the length of nanowires is varied between about 2 and 4 um. The X-ray diffraction (XRD) reveals the structural defects induced by the Ga doping. The room temperature photoluminescence (PL) spectra of Ga-doped ZnO nanowires show strong UV emission between 382.394 and 385.279 nm with negligible visible emission.

• Korean Journal of Materials Research
• /
• v.30 no.11
• /
• pp.609-614
• /
• 2020

3 mol% yttria-doped stabilized zirconia (3YSZ) is synthesized by a solvothermal process, and its characteristics are investigated using various methods. Also, the dispersibility of synthesized 3YSZ nanoparticles is observed with the species of surface modifier. The 3YSZ nano sol prepared with an optimum condition is employed in prism coating and its properties are evaluated. The synthesized 3YSZ nanoparticles show a globular shape with about 10 to 20 nm crystallite size. The mixed phases with the nano sol show a high specific surface of 178 ㎡/g. The prism sheet coated with the 3YSZ nano sol present an excellent refractive index, transmittance, and luminance; refractive index is 1.603, transmittance is 90.2 %, and luminance of coating film is improved by 5.9 % compared to that of the film without 3YSZ nano sol. It is verified that the surface modified 3YSZ is suitable as the prism sheet for optical displays.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.131-131
• /
• 1999

비정질 카본 박막은 다이아몬드와 유사한 높은 경도, 내마모성, 윤활성, 전기절연성, 화학적 안정성, 그리고 광학적 특성을 가진 재료로서 플라즈마 CVD를 이용한 합성방법으로 제조된 박막이 주로 연구되고 있다. 본 연구에서는 마그네트론 스퍼터링을 이용하여 다양한 조건의 카본 박막을 제조하였다. 카본 박막의 제조는 이온빔이 장착된 고진공 증착 장치를 이용하였고 시편의 청정시 사용된 이온빔의 조건은 빔 전압이 500V, 빔 전류는 0.1mA/cm2로 기판 청정을 거친 후 DC 마그네트론 스퍼터링을 이용하여 흑연을 증발시켜 박막을 제조하였다. 기판과 타겟의 거리는 13cm로 고정시킨 후 타겟 전류는 1A로 유지하면서 30분간 증착하였다. 기판은 Si-wafer와 glass를 주로 사용하였으며 기판 인가전압, 아세틸렌 유량, 기판 온도등을 변화시켜가면서 각각 카본 박막을 제조하였다. 비정질 카본박막의 막은 평균 두께는 0.4~1.2$\mu\textrm{m}$이며 SEM을 이용하여 단면의 성장구조를 관찰하였다. 라만 분광분석과 FTIR 분광분석을 통하여 비정질 카본 박막의 결합특성을 조사하였고 scratch tester를 이용하여 박막의 밀찰력을 관찰하였다. 제조된 박막의 두께는 아세틸렌 가스 이용시 1$\mu\textrm{m}$ 이상의 박막의 제조가 가능하였으며 카본 박막의 라만 분광특성은 고체 탄소 물질의 S와 G-peak으로 구성되어 있으며 기판 인가전압, 아세틸렌 가스 유량 변화에 따른 peak의 위치 이동 및 FWHM의 변화를 관찰하였다. RFIR 결과는 아세틸렌 가스의 유량이 증가에 따라 C-H 결합 분포가 증가며 기판 인가 전압이 증가할수록 C-H 결합분포가 감소하는 경향이 나타냈다. 이는 이온 충돌 효과에 따라 결합력이 약한 C-H 결합이 우선적으로 파괴되는 현상으로 생각되어 진다. Scartch tester 측정 결과 박막의 밀착력은 실험조건에 따른 경샹성은 보이고 있지 않으나 10N 정도이며 60N 이상의 강한 밀착력을 가진 박막도 제조되었다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.4
• /
• pp.328-336
• /
• 2020

This paper presents an asymptotic analysis method using the PO(physical optics) approximation technique to analyze the scattering contribution of an electrically large object partially coated with a radar absorbing material(RAM). By using the feature of the PO technique that can calculate the equivalent current value for each mesh independently, instead of analyzing the entire structure, scattering analysis was performed only by calculating the current on the area where the RAM coating is applied. By the numerical examples, the accuracy and the computation time of the proposed method were verified, and the computational efficiency of inverse synthetic aperture radar(ISAR) of the electrically large objects that require enormous resources is improved.