• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.151-160
• /
• 2008

In this paper, the analysis results of synthetic resonance characteristics are described for the electrohydraulic thrust vector control actuation system. The synthetic resonance is induced by integration of position servo actuation system on the flexible launch vehicle mounting structure. The new resonance mode is synthesized due to composition of hydraulic resonance for electrohydraulic position servo system with inertia load condition and structural resonance for flexible mounting structure. This synthetic resonance can make stability of control system worse by feedback and amplification of control system. The exact nonlinear analysis model of this phenomenon is developed to predict and design a control algorithm for improvement characteristics. The DPF (Dynamic Pressure Feedback) control algorithm has been designed and has excellent resonance suppression capability.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.4
• /
• pp.328-341
• /
• 2017

In the control actuator system of a launch vehicle based on thrust vectoring, the interaction between electro-mechanical position servo and inertial load are combined with the dynamic characteristics of the flexible vehicle support to generate synthetic resonance. This occurred resonance is fed back to the attitude control system and can influence stability of launch vehicle. In this study, we proposed a simulation model to analyze synthetic resonance of electro-mechanical actuation system for thrust vector control and explained the results of simulation and test using dynamic force feedback control which improves dynamic characteristics of servo actuation system by reducing synthetic resonance.

• Journal of Sensor Science and Technology
• /
• v.9 no.1
• /
• pp.28-35
• /
• 2000

In this study, we investigated the characteristics of polyurethane synthesis by simultaneously measuring resonant frequency and resonant resistance with a quartz crystal analyzer. The rapid decrease of resonant frequency was appeared because automatic catalytic reaction was caused by the polyurethane formed in initial stage of polyurethane synthesis. In prepolymer(PP) synthesis, the resonant frequency was slowly stabilized after a rapid decrease at a certain point of time. But in segmented polyurethane synthesis in which chain-extender was involved, the resonant frequency increased again after a rapid decrease at a certain point of time. It was considered that this tendency took place because the chain-extender, 1,4-butandiol, caused a soft segment to change to a hard segment. The resonant resistance was used in the analysis of mechanism. From the results, the characteristics of polyurethane synthesis could be analyzed on-line using a quartz crystal analyzer, and the synthesis mechanism could also be interpreted.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1615-1617
• /
• 2004

5 mol% $BaWO_4$를 첨가시켜 합성한 Ba$(Mg_{1/3}Ta_{2/3})O_3$를 이용하여 비방사유전세선로에 삽입되는 세라믹스 공진기를 제자하고 기존의 $MgTiO_3-CaTiO_3$계 세라믹스 공진기와 공진특성을 비교하여 그 특성을 고찰하였다. 그 결과 BMT 세라믹스는 기존의 $MgTiO_3-CaTiO_3$계 세라믹스보다 품질계수가 2배 이상 크게 높게 측정되었고, 측정 사진의 관찰 결과 전파차단성도 우수할 것으로 예상되기 때문에 BMT가 비방사유 전체선로에 삽입되는 유전체 공진기 재료로서 적용될 경우 우수한 공진특성을 발휘할 것으로 판단된다.

• Proceedings of the KSR Conference
• /
• 2006.05b
• /
• pp.380-387
• /
• 2006

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.1
• /
• pp.118-123
• /
• 2008

This paper proposes a frequency transfer function synthesis for approximating a high-order model with resonance to a low-order model in the frequency domain. The presented model approximation method is based on minimizing the error function weighted by the numerator polynomial of approximated models, which is used of the RLS(Recursive Least Square) technique to estimate the coefficient vector of approximated models. The proposed method provides better fitting in a low frequency and peak resonance. And an example is given to illustrate feasibilities of the suggested schemes.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.4
• /
• pp.326-333
• /
• 2004

This research proposes a high frequency resonant inverter for high power conversion apparatus, which is consist of two L-C linked full-bridge inverter using MOSFET in order to distribute voltage and current of the devices. As an output power control strategy, the time sharing control method is applied. From the computer simulation results, the inverters and devices can be shared properly voltage and current rating of the system. And also, theoretical characteristics of the proposed circuit are compared with experimental results.

• The Journal of the Acoustical Society of Korea
• /
• v.5 no.3
• /
• pp.21-27
• /
• 1986

LSP 방식은 음성의 주파수 특성을 포함하는 공진 주파수를 낮은 부분과 SHB은 부분의 주파수 로 표시되는 선스펙트럼쌍 계수를 구하는 방법이다. 본 논문은 LSP 방식을 사용하여 한국어의 기본 모 음 7개를 대상으로 하여 분석하고 LSP 계수를 구하는 Algorithm을 개발하였으며 PARCOR 방식과 비 교하였다. 실험 결과 LSP 방식의 연산량이 PARCO 방식의 연산량보다 약 1/2정도로 적음을 알 수 있었 고 Hardware 구성 시에 있어서도 경제적임을 알 수 있었다. 그리고 LSP는 계수 모음의 종류에 따라 각 기 다른 공진 주파수, 대역폭을 나타내기 때문에 음성 합성이나 음성 인식 분야에 있어 기초 자료로 이 용할 수 있을 것으로 사료된다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.2
• /
• pp.39-46
• /
• 1990

In this paper, Rectangular microstrip patch array antenna. relative current of which is distributed to 1:2:2:1, is designed and fabricated by using Tschebyscheff's polynominal expression and is verified by theoretical analysis and experiment. Seeking for more accurate resonant frequency, an equivlent network, which is consisted including feed line and power distribution line, is analyzed by using the analysis method of transmission line mode. As a result of their comparison and examination, such as resonant frequency by fringing effects, by return loss, by experiment, it is conformed that errors are not barely and agreed with each other. is also agreed with a measured values.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.1
• /
• pp.57-63
• /
• 2014

In this paper, we have proposed a wide band antenna for manpack SDR(Software Defined Radio). The proposed antenna consists of feeding post, flexible gooseneck and two radiating elements composed of a upper and lower radiators. The upper radiator has a longer electrical length than the lower radiator in order to operate in the lower frequency. Also, the resonant frequency and impedance characteristics of the antenna can be adjusted independently for two radiators. Therefore, the proposed antenna can be achieved wide impedance bandwidth by the combination of two independent resonance modes. To analyze the characteristics of the antenna in the design process is employed the equivalent circuit theory and EM(Electro-Magnetic) simulation. The measurement results show that the proposed antenna have the sufficient wide bandwidth, above -3.4dBi of the gain and fairly good radiation pattern over the wide bandwidth.