• Membrane Journal
• /
• v.20 no.1
• /
• pp.40-46
• /
• 2010

In this study, we manufactured the membrane using the polyethersulfone (PES) of fiber by using the electrospinning method. The polymer electrolyte membrane for fuel cells was manufactured by impregnating Nafion solution to the porous PES membrane. We confirmed that electrospun PES membrane has higher thermal stability than Nafion 212 membrane by thermogravimetric analysis. Impregnated Nafion in the pores of the electrospun PES membrane was characterized by scanning electron microscopy. The AC impedance data shows the hydrogen ionic conductivity of $10^{-2}$ S/cm below $100^{\circ}C$. Nafion impregnated PES membrane shows the maximum performance at $90^{\circ}C$ showing current density of 389 mA/$cm^2$ at 0.6 V, while Nafion 212 membrane shows maximum at $75^{\circ}C$.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.41-41
• /
• 2012

고급 스포츠웨어와 이너웨어 등에 많이 사용되고 있는 나일론/폴리우레탄 혼방제품은 염색에 있어서 Grin-through 현상, 인공피혁의 염료 이염 현상 등 많은 문제들이 존재한다. 본 연구의 나일론과 폴리우레탄 복합소재에서 나타나는 염색거동을 고찰하고 분석하여, 폴리우레탄 복합소재의 염색성을 개선하기 위하여 실시하였다. 폴리우레탄 복합소재는 해성분이 용출되지 않은 나일론 초극세사 소재에 폴리우레탄 수지를 함침하여 인공피혁과 같은 느낌을 주도록 직접 제조하였다. 제조된 폴리우레탄 함침 나일론 초극세사 소재의 해성분을 용출하였고, Red 색상의 밀링형 산성 염료, 함금속 염료와 반응성 염료에 따라 달라지는 염색특성 및 세탁 견뢰도 등을 고찰하였다. 본 연구를 통하여 다음과 같은 실험결과를 얻을 수 있었다. 나일론 초극세사와 폴리우레탄 수지를 준비하여 습식공정을 통해 인공피혁을 제조한 함침 소재를 알칼리 감량하였고, 감량률은 15~17% 정도로서 대부분의 해성분이 용출됨을 확인하였다. PPG와 PTMG로 구성된 폴리올을 기반으로 한 폴리우레탄 함침 피혁과 PTMG를 단독으로 사용한 함침 피혁의 염색성을 비교한 결과, PPG+PTMG 타입이 더 우수한 염색성을 나타내었다. 특히 밀링 타입과 함금속 타입 염료의 경우는 거의 2배 이상의 흡진율과 겉보기 색농도를 나타내었다. 한편, 반응성 염료의 경우는 두 종류의 폴리우레탄 필름에 거의 염착되지 않았기 때문에 앞으로의 염색실험에서 제외하였다. 견뢰도 측면에서는 각각의 피염물의 등급은 거의 유사하게 나타남을 확인하였다. 이상과 같은 결과로부터, 인공피혁 제조시 PPG+PTMG 타입의 폴리우레탄 수지를 사용하여 함침시 더 높은 색강도와 염착률을 얻을 수 있음을 알았다. 사용하는 염료의 종류를 좀 더 다양하게 하여 실험을 실시하고 폴리우레탄의 물성 및 분석 등의 추가적인 연구가 진행된다면, 인공피혁의 염색시에 발생하는 여러 가지 문제점들을 해결할 수 있을 것이다.

• Journal of Conservation Science
• /
• v.21
• /
• pp.49-58
• /
• 2007

Among the treatment results of test samples of the antique lacquer-ware, the treatment with PEG#3,350 40% solution displayed excellent effect with low shrinkage ratio; in weight gain the treatment with Sucrose 19%+Glycerin 1%(t-butanol 5% in water) solution showed consistent increase. However during the impregnation process of Sucrose, the weight of the testing samples decreased by dehydration because the inner part of the test samples and the treatment solution showed concentration gradient. Therefore, we concluded longer impregnation period should be necessary to prevent dehydration. Since both higher and lower molecular weight treatment chemicals could penetrate into the wood of the lacquer-ware, air drying and conditioning after impregnation treatment with high concentration chemicals would be possible, as well as vacuum freeze-drying.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.30-32
• /
• 2012

본 연구에서는 Cu, Mn을 함침 시킨 상용 제올라이트13X 촉매에 CO 산화 전환 반응에 영향을 연구하였다. 촉매 제조는 담지량별로 Cu, Mn을 서로 다른 비율로 물리 혼합하여 상용 제올라이트에 담지하였다. 함침방법은 과잉용액 함침법을 사용하였고, 건조 후 공기분위기에서 소성하여 산화물 형태로 담지하였다. 기본적인 촉매 특성은 X-선 회절분석, 질소흡탈착 등온곡선을 이용하여 기공크기, 기공부피, 비표면적을 구하였으며, FT-IR, 주사현미경, $NH_3$-TPD/TPR, EDX로 특성을 분석하였다. 촉매 산화반응 실험은 고정층 반응기에서 수행하였으며, 외경1/4 inch(내경 4 mm)석영관에 촉매를 중진하고 Gas Chromatograph로 배출가스를 측정하여 Cu-Mn 제올라이트 촉매의 일산화탄소 산화반응을 연구하였다. 일산화탄소 농도, 온도 및 공간속도, Cu-Mn 함량 비율에 따른 산화반응 실험을 수행하여 최적 산화조건과 촉매를 도출하였다.

• Nuclear Engineering and Technology
• /
• v.5 no.2
• /
• pp.103-114
• /
• 1973

Radiation grafting of acrylic acid and 4-vinylpyridine at room temperature has been studied by an impregnation method to improve the hygroscopic properties, the antistatic behavior and the dyeability of polyester fabric. Polyester fabric was impregnated with acrylic acid or aqueous emulsion of acrylic acid-4-vinylpyridine by immersion at 25$^{\circ}$or 7$0^{\circ}C$. The impregnated fabric was irradiated under nitrogen gas with ${\gamma}$-rays from Co-60. When acrylic acid grafted polyester fabric was treated with sodium carbonate, calcium acetate and potassium persulfate, tne rate of water absorption was increased and most parts of polyacrylic acid formed were extracted off from the fabric with 0.1% solution of sodium hydroxide at 10$0^{\circ}C$. In the case of the impregnation of a mixture of acrylic acid and 4-vinylpyridine the petcent of grafting has been shown to be proportional to the ratio of 4-VP/AA and radiation dost. Estimating by contact angle measurements of water on the various polymer surfaces, the antistatic behavior was decreased with the increase of grafting percent. The investigation of electron micrograph disclosed the existence of certain type of discontinuities in the acrylic acid grafted polyester fiber which was treated with various salts.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.445-448
• /
• 2008

The unsaturated polyester(UP) and epoxy resin have a superior material properties and a chemical resistance using sewerage pipes rehabilitation. However, UP and epoxy have not a low temperatures harding, the requirement $8{\sim}11$ hours long times harding and heating system used by reinforcement liner. This study is to evaluate the effects of low temperature harding properties methyl methacrylate(MMA) monomer using expanded polystyrene(EPS) and UP in addition of initiator and promoters. From the test result, viscosity tends to increase with increasing EPS and UP contents. However, harding time change of the MMA resins which it follows in addition of the initiator and promoter.

• Composites Research
• /
• v.17 no.4
• /
• pp.61-67
• /
• 2004

Nondestructive damage sensitivity on single-basalt fiber/epoxy composites was evaluated by micromechanical technique and acoustic emission (AE). Piezoelectric lead-zirconate-titanate (PZT), polyvinylidene fluoride (PVDF) and poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) copolymer were used as AE sensor, respectively. In single-fiber composite, the damage sensing with different sensor types were compared to each other. Piezoelectric PVDF polymer sensor was embedded in and attached on the composite, whereas PZT sensor was only attached on the surface of specimen. In case of embedded polymer sensors, responding sensitivity was higher than that of the attached case. It can be due to full constraint inside specimen to transfer elastic wave coming from micro-deformation. For both the attached and the embedded cases, the sensitivity of P(VDF-TrFE) sensor was almost same as that of conventional PVDF sensor.

• Fire Science and Engineering
• /
• v.25 no.3
• /
• pp.57-62
• /
• 2011

The combustion characteristic was evaluated for Pinus densiflora, used as a building material in Hanok, which were treated with two different flame retardant method. The specimen was brushed with flame retardant liquid two or three times and then let the specimen dehydrated during 24 h for spreaded treating. And the other specimen was soaked in the liquid for 72 h. The test methods were inflammability test using meker burner and heat release rate test using cone calorimeter. As a result for the tests, flame retardant treated specimens met the requirements of the inflammability and the spreaded treated method was more efficient than immersed method. The spreaded treated specimen had lower combustive properties than immersed specimen in TTI (time to ignition), PHRR (peak heat release rate), MLR (mass loss rate) and THR (total heat release).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6816-6822
• /
• 2015

In this study, silica aerogel-glass wool composites were developed for improvement of thermal conductivity and overcoming the water adsorption of glass wool boards. Silica aerogel-glass wool composites were prepared by glass wool and silica aerogel with liquid binder. Mixtures with binder were composed of CMC (carboxymethyl cellulose) and silica aerogel for glass wool board. Silica aerogel-glass wool composite boards were had $0.065g/cm^3$ density by impregnation silica aerogel where from origin glass wool board at $0.048g/cm^3$ density. Thermal conductivity of silica aerogel-glass wool composites were 0.0315 W/mK (up to 7.4% thermal resistance) and fire penetration time came to 362 seconds (up to 2.7 times stronger than origin glass wool board). In addition, hydrophobic aerogel characteristics prevented the adsorption of water onto silica aerogel-glass wool composite boards that was good for lightweight.

• Applied Biological Chemistry
• /
• v.43 no.1
• /
• pp.67-71
• /
• 2000

Termiticidal activities of Chamaecyparis obtusa were quantitatively evaluated, and the activity differences between supporting materials such as woodmeal and filter paper or between species were defined based on the termiticidal activity value(TAV). It was found that TAV was high in the following order ; C. obtusa>Litsea coreana>C. obtusa var. formosensis>Ternstroemia gymnanthera. In particular, termiticidal activity of C. obtusa heartwood was stronger by 5 to 9 times than that of other three species. Median survival dosage(MSD) of C. obtusa was 108.8 mg. In case of woodmeal or filter paper tests with C. obtusa, termiticidal activities were inversely proportional to logarithms values of an added sample weight and median survival time(MST). The difference of termiticidal activities between woodmeal and filter paper in the methanol extracts was small, but that in the neutral fraction was enormous as 3.21 times. However, termiticidal activity of neutral fraction was corresponded to 17 to 53% of original woodmeal, and 47 to 83% of termiticidal activity was considered as a loss in test process.