• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.272-280
• /
• 2022

An aircraft carrier is a combat ship that acts as an aircraft base at sea and performs combat through aircraft mounted as a military ship operating the aircraft. The Navy proposed a 40,000-ton light aircraft carrier operation plan that could be equipped with vertical takeoff and landing fighter jets and helicopters around 2033, and based on this, this study examined the operation of aircraft control equipment among the aviation support systems required for operating light aircraft carriers in Korea. PriFly, TWR's ILARTS, ILM for airspace control, ASR, PAR, LAAS or RNAV, PALS (JPALS) for access control are required as essential equipment, and communication network and SCATT-16 are required along with URN-25 TACAN, ICLS (El/Az), ACLS OLS, MOVAS, IFLOLS, etc. This study consists of two parts, and part 2 will describe a specific control method on an aircraft carrier.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.8
• /
• pp.1103-1109
• /
• 2021

ECS is a control device so that the warship can perform the mission stably by controlling and monitoring the entire propulsion system. As the recent provisions of the warship, it's propelling system is complicated than past, as the demand performance and mission of the warships are diverse. In accordance with the complicated propulsion system configuration, the demand for automatic control function of the ECS is increasing for convenient and stable propulsion system control for convenient and stable. As a result, verification of ECS stability and reliability is required. In this paper, we develop an interlocking signal simulator for verifying ECS control logic and communication protocol for warship with CODLOG propulsion systems. The simulator developed was implemented to simulate a signal of gas turbine, propulsion motors, diesel generator and 11 kinds of auxiliary equipment. The reliability of ECS was verified through the ECS communication program and the I/O signal static test with the simulator.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.11
• /
• pp.147-155
• /
• 2020

System support software is one of the software that makes up ship combat management system and has the characteristics of being mounted in the combat management systems of all ships but with little functional change. However, despite these characteristics, software modifications due to equipment, etc. are inevitable in the application of new ships. Modification of software causes software reliability testing which is a key factor in increasing development costs. In this paper, the structure of the existing system support software was analyzed to identify and supplement the code change factors, and the system support standardization architecture was designed. The feature model elicited common and variable elements of system support software, and applied white-box reuse to improve software design. In addition, the results of comparing existing system support software with the new architecture in terms of development elements and time to perform reliability test were presented to verify the effectiveness of the new one.

• The KIPS Transactions:PartA
• /
• v.18A no.5
• /
• pp.181-192
• /
• 2011

Information superiority is an essential factor in modern warfare and it can be archived by efficient information exchange between systems. Various computing systems are installed on the today's navy vessels. However, it is hard to improve interoperability and efficiency of information exchange since the configurations of installed systems are varying. The military standard and commercial standard are mix-used between systems. In this paper, we propose an information exchange architecture based on Pub/Sub model as a communication middleware to improve interoperability as well as enhancing scalability. We also propose a novel tree matching algorithm to improve a performance of PubSub broker. In the proposed algorithm, each tree nodes have information about predicates of subscription that can reduce event matching time. The performance evaluation results show our proposed algorithm reduces time for matching predicates compare with other algorithms.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.1
• /
• pp.177-187
• /
• 2001

It is important to test and evaluate the variation degree of ship-mounted antenna radiated power with respect to all directions in order to use more effectively antennas that installed on naval ships. The naval ship has various sensors for navigation, communication and electronic warfare, etc. And the performance of these sensors extremely depends on the various characteristics of antenna system to transmit and receive electromagnetic wave. The radiated power pattern of the antenna differs from all aspect angles of the ship because of complex superstructures. It is important to know the weak point(direction) of antenna radiation for appropriate operation. Therefore, the ARP(Antenna Radiation Pattern) of shipboard antennas is measured for the all aspect angles. The results of ARP measurement are utilized as reference for antenna arrangement of newly-built same class warship. This study also describes the development results for the ARP measurement technique, software design and test procedures to measure the radiation pattern of communication equipment antennas using the fixed test site.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.4 s.121
• /
• pp.317-323
• /
• 2007

Non-contact underwater explosions against surface ships could cause extensive equipment damage and render the ship inoperative. As an analytical method, DDAM(dynamic design and analysis method) is used for ship shock design. In this paper, in order to verify the finite element model of large shipboard equipment, modal test of equipment was performed. Major objective of this paper is to describe shock analysis methodology for large shipboard equipment attacked to the top and bottom foundations.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.411-415
• /
• 2007

The reduction of airborne and structure-borne noise of a shipboard pump for a navel ship is very important because the noise levels of the pump must not exceed criteria such as MIL-STD. In this paper, several practical examples of reducing the noise levels are presented. The examples show that the inadequate rotor-balancing and shaft-alignment results in the increase of the structure-borne noise on all lower mounts. It is also found that the unequal loading on mounts can cause the dramatically increasing the noise levels on certain local positions. Since the piping system arrangement such as valve location, flexible joint, and elbow location affects on the noise measurement, care must be taken to minimize the unnecessary noise from the piping system.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.214-215
• /
• 2005

Naval equipments are installed and used for naval vessel with different environmental conditions comparing to the commercial vessel, for example, high engine power per ship displacement size, severe vibration and shock due to high running speed and explosion from naval gun's bombardment and underwater weapons. Therefore, those equipments must be installed on shipboard with small spaces, high ambient temperature around engine room and which are required be fabricated with high resistances of vibration, shock and heat resources. But in case of commercial vessel, the performances of their recent equipments naval have been improved continuously due to the technology development of domestic shipbuilding and shipboard equipment industries, together with the related fundamental industries i.e, metal, steel and electronic industries, to an international level since 1970. With these results, it became possible to unify the specifications of shipboard equipments for the commercial and military vessels(Dual-Use). In this study, vibration and shock test standards for the commercial and military vessels will be compared and reviewed technically.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.7
• /
• pp.509-516
• /
• 2014

This paper proposes estimation model of uncertainty in vibration measurement of shipboard equipment and analyzes the result of uncertainty estimation. Vibration of shipboard equipments affects underwater radiated noise that is important performance related to stealth of the naval vessel. Acceptance testing for shipboard equipment is required to guarantee the stealth performance of naval vessel. In measuring, detailed uncertainty estimation is essential to improve measuring reliability. Acceptance testing result of structure-borne noise and vibration is used to analyze uncertainty in vibration measurement of shipboard equipment.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.3
• /
• pp.25-33
• /
• 2007

In this paper, I propose a method which can enhance the visual quality of IRST images based on a loaded location in ship and an AOS. The IRST adjusts an AOS to detect targets with various altitudes because of its narrow vertical field of view and offers various functions to enhance images with its low contrast. In the proposed method, images are divided into two regions of sea and sky on the basis of the horizon after establishing relation between an AOS and a horizon location within an image. As a result, image enhancement of the proposed method is performed adaptively according to the divided region while that of conventional method is performed for entire image without the region division. Simulation results show that the proposed method represents higher visibility compared with conventional one.