• Journal of Nutrition and Health
• /
• v.14 no.2
• /
• pp.97-104
• /
• 1981

In order to study the changes of components and enzyme activities during Chungkookjang-Koji preparation, the Kojies were prepared with Bacillus Natto, Bacillus subtilis and traditional method. The temperature of Koji materials during Koji preparation was very different according to the experimental group. The content of ethyl alcohol, reducing sugar, amino nitrogen and water soluble nitrogen were changed by the Koji preparing stage and experimental group. Amylase and protease activities showed on irregular change on standing and their activities were not remarkably different among the groups and appeared weakly.

• The Journal of the Petrological Society of Korea
• /
• v.18 no.4
• /
• pp.315-336
• /
• 2009

We have studied the orientational characteristics of microcrack frequency, it's length and density in Tertiary crystalline tuff from the northeastern part of the Gyeongsang Basin. 134 sets of microcracks on horizontal surfaces of 3 rock samples from Heunghae-eup were distinguished by enlarged photomicrographs of the thin sections. The variability in patterns among microcrack length-frequency histograms for three rock samples from different altitudes were derived. The pattern of histograms changes progressively from negative exponential form to log-normal form in proportion to altitude. The distribution pattern for rock sample no.1 from lower altitude shows the broad length distribution characterized by higher mean and median, and higher standard deviation. Meanwhile, this distribution pattern corresponds with characteristics of joint length distribution in sedimentary rocks of the lower part of the Gyeongsang Supergroup. The occurrence frequency of shorter microcracks increases toward both NW and NE directions from the $N0{\sim}10^{\circ}W$, with the dominant direction of $N80{\sim}90^{\circ}W$ and $N80{\sim}90^{\circ}E$, respectively. This distribution pattern represents the relative differences in formation timing among microcrack sets and the result of the new initiation of shorter microcracks. Meanwhile, the longest microcracks within $N60{\sim}70^{\circ}W$($L_{max}$:1.18 mm) and $N0{\sim}10^{\circ}W$($L_{max}$:0.80 mm) directions are seen, but this kind of microcracks are very limited in number. Whole domain of the directional angle($\theta$)-frequency(N), length(L) and density($\rho$) chart can be divided into five sections in terms of phases of the distribution of related curves. From the distribution chart, density curve shows five distinct peaks in the WNW-ESE($N70{\sim}80^{\circ}W$), NS~NNE-SSW($N0{\sim}10^{\circ}W$, $N10{\sim}20^{\circ}E$), ENE-WSW($N50{\sim}60^{\circ}E$), and nearly EW($N80{\sim}90^{\circ}E$) directions, respectively. Especially, main directions of faults correspond with the directional angle showing high density. Consequently, these distribution patterns of density curve reflect the representative maximum principal stress orientations suggested in previous studies.

• Journal of the Korean Society of Radiology
• /
• v.10 no.5
• /
• pp.327-335
• /
• 2016

The study is enforce to study image quality evaluation of condition provide the IEC and combination of clinical conditions each quality of radiation that image quality to assess the conditions provided to IEC in the clinical environment to conduct image quality assessment of the digital radiography system in the detector have environmental limits. First, image quality evaluation was evaluated by measuring the MTF, NPS using four quality of radiation and Using MCNPX simulation lastly DQE make a image quality evaluation after calculating the particle fluence to analyze spectrum quality of radiation. Second, Using MCNPX simulation of four quality of radiation was evaluated absorbed dose rate about electronic 1 per unit air, water, muscle, bone by using Radiation flux density and energy, mass-energy absorption coefficient of matter. Results of evaluation of image quality, MTF of four quality of radiation was satisfied diagnosis frequency domain 1.0 ~ 3.0 lp/mm of general X-ray that indicated 1.13 ~ 2.91 lp/mm spatial frequency. The NPS has added filter, spatial frequency 0.5 lp/mm at standard NPS showed a tendency to decrease after increase. Unused added filter, spatial frequency 0.5 lp/mm at standard NPS showed a certain NPS result value after decrease. DQE in 70 kVp / unuesd added filter(21 mm Al) / SID 150 cm that patial frequency 1.5 lp/mm at standard showed a tendency to decrease after certain value showed. Patial frequency in the rest quality of radiation was showed a tendency to decrease after increase. Results of evaluation of absorbed dose, air < water < muscle < bone in the order showed a tendency to increase. Based on the results of this study provide to basic data that present for the image quality evaluation method of a digital radiation imaging system in various the clinical condition.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.3
• /
• pp.167-173
• /
• 2002

This experiment was conducted to figure out the change of soil physical properties, rice growth and yield with the years of continuous cultivation in direct dry-seeding and no-tillage machine transplanting. Experiments were conducted at NHAES(National Honam Agricultural Experiment Station, RDA, Iksan, Cheon Buk Province, South Korea) with a rice variety "Dongjinbyeo" from 1995 to 2000. In no-tillage machine transplanting cultivation, organic matter in soil was higher than that on direct dry-seeding and was significantly high in topsoil. Problematic weed species were E. crus-galli B., A. keisak H., and L. japonica M. Plant height and tiller number m-2 were higher in common-tillage during the total growth duration. The highest weedy rice occurrence of 27.5% was observed in live years' continuous direct dry-seeding and followed by 6.2%, in four years', and 3.7%, in three years'. The highest yield reduction of 38% was observed in five years' continuous direct dry-seeding. The reduction may resulted from the competition between weedy rice and cultivated rice.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.5
• /
• pp.405-412
• /
• 1993

This experiment was conducted to investigate the effects of water depths on seedling stand and early growth of califonia rice varieties, S201, M202, A301, Italico livorno and Korean variety, Hwaseongbyeo, and barnyardgrass (Echinochloa crus-galli) The coleoptile length of rice was longer with deep water depth while for the radicle length shorten. As water depth was increased, the percentage of seedling stand were decreased slightly in rice, while sharply increased in barnyardgrass. Plant height of rice with increasing water depth were longer, whereas that of barnyardgrass reduced significantly with weaker. Tiller number of rice and barnyardgrass were significantly reduced as water depth increased. Dry matter weight and healthy score of rice seedling at 35DAS were highest in 7.5cm water depth followed saturated moisture, 15, and 22.5cm water depth, while for barnyardgrass those were especially negatively affected by deep water depth. These results showed that the seedling stand and early growth of barnyardgrass was highly suppressed by deeper water levels compared with rice. Rice cultivars which are showes growth characteristics in deeper water levels at early growth stage were Italico livorno and S201 in Japonica / Indica.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.4
• /
• pp.494-503
• /
• 1995

The selection of salt tolerant rice variety needs an effective method in its testing. Salinity of irrigated water, 0.5% at seedling stage, 0.6% at tillering stage, and 0.9% at panicle formation stage were treated to test salt tolerance of rice using 45 cultivars. At tillering stage, salty water irrigation reduced plant height to 22.6% in early maturing rices(EMR), 30.5% in medium maturing rices(MMR), and 20.9% in medium-late maturing rices(MLMR), and also reduced number of tillers to 11.2% in EMR, 36.2% in MMR, and 36.0% in MLMR compared to rices grown in non-salty water irrigation. At panicle formation stage of rice, salty water irrigation affected plant height and tiller numbers that showed varietal differences. As salt tolerant rice cultivars, Daegwangbyeo, Namweonbyeo, Sinseonchalbyeo, Gyehwabyeo, and Daeyabyeo were selected. Jinbubyeo, Donghaebyeo, and Tamjinbyeo were weak in salty water irrigation.

• Economic and Environmental Geology
• /
• v.40 no.1 s.182
• /
• pp.1-14
• /
• 2007

The Guemseong mine is located near the southern margin of the Jurassic Jecheon granitoids collectively with the Cambro-Ordovician mixed dolostone-limestone series of the Yeongweol Group, Choseon Supergroup. Here, two spatially distinct types of skarn formation have been observed. The upper transitional skarn is the calcic Mo skarn which has the mineral assemblage of $garnet+hedenbergite+epidote{\pm}wollastonite{\pm}magnetite{\pm}hematite{\pm}amphibole{\pm}chlorite{\pm}vesuvianite$ within the calcite marble. On the other hand, the lower proximal skarn occurs as a discordant magnesian Fe skarn at the contact of Mo-bearing aplitic cupolas with unidirectional solidification texture(UST) within the dolomitic marble. The magnesian Fe skarn has the mineral assemlage $olivine+diopside+magnetite+tremolite+serpentine+talc+chlorite{\pm}phlogopite$. The formation of two different types of skarn and ore mineralization in Geumseong mine have been attributed to multistage and complex metasomatic replacements that ultimately resulted in silicate-oxide-sulfide sequence of metasomatism. An early prograde stage with anhydrous skarn minerals such as olivine, clinopyroxene and/or garnet with magnetite, formed from high temperature (about $500^{\circ}\;to\;400^{\circ}C$) at an environmental condition of low $CO_2$ fugacity ($XCO_2<0.1$) and 0.5 kbar. The later retrograde stage with hydrous silicates such as amphibole, serpentine, phlogopite, epidote and chlorite with molybdenite or hematite, termed from relatively lower temperature (about $400^{\circ}\;to\;300^{\circ}C$).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.11
• /
• pp.1435-1442
• /
• 2008

The purpose of this study was to identify the influence of consumption value on healthy functional food choice. Also, this study explored the role of health motivation, health concern, and food involvement as a moderating variable in the relationship between consumption value and healthy functional food choice. A total of 281 responses were collected using on-site survey (response rate 96.0%) from college students in Daegu, Gyeoungbuk Province. The questionnaire contained questions on consumption value, health motivation, health concern, food involvement, and purchasing intention of healthy functional food. The respondents rated the items using a 5-point scale from 1 (strongly disagree) to 5 (strongly agree). According to the confirmatory factor analysis, item evaluating using factor loading resulted in the retention of 25 consumption value items loading on seven factors, four health motivation items loading one factor, six health concern items loading on one factor, and four food involvement items loading on one factor with an internal consistency. Results of stepwise regression found that social value-I, emotional, functional, epistemic, and conditional values among consumption value determined the purchasing intention of healthy functional food. Results of hierarchical regression showed that health concern had a positive effect on the relationship between social value-I and purchasing intention of healthy functional food.

• Journal of Global Scholars of Marketing Science
• /
• v.2
• /
• pp.17-37
• /
• 1998

중소기업간 협력 활동은 사업의 전체 혹은 일정 부분에 대하여 분업이나 협업의 관계를 맺는 공동사업의 형태로 나타난다. 기업간 연결의 강도에 따라 기업들간에 형성되는 분업과 협업의 관계를 시장형, 중간조직형, 위계조직형으로 구분할 때, 중소기업간 공동사업은 중간조직형에 속하는 일종의 기업간 네트워크라고 볼 수 있다. 물론 네트워크형의 협력관계를 추진하는 방식도 업무제휴, 지분제휴, 합작투자, 컨소시엄 등으로 다양하다. 그러나 완전한 자본적 통합에 따른 위계적 조직과는 달리 참여기업들이 독립성을 유지하면서, 네트워크 밖의 기업에 대해 경쟁우위를 확보하기 위해 형성한다는 공통점을 가지고 있다. 기업간 협력관계를 통해 참여 기업들이 얻을 수 있는 혜택에 관한 기존연구들은 크게 두 가지로 나누어 볼 수 있다. 하나는 기업의 생산함수를 중심으로 그 이점을 파악하는 것이고 다른 하나는 관계의 종류에 따라 기업간 거래관계를 관리하는 소위 거래비용의 효율성을 중심으로 혜택을 파악하는 접근방법이다. 전자의 접근방법을 따를 때, 기업간 협력의 근본 유인은 규모의 경제(혹은 비경제), 범위의 경제, 집적의 경제, 구도의 경제 등이 협력관계에서 발생하는 혜택의 근본 원천이다. 기술과 제도의 발전, 시장과 경쟁환경의 변화에 따른 기업간 협력의 필요성은 갈수록 증대되고 있다. 소비자들의 요구는 매우 개성화 다양화되고 종합화되는 추세이다. 더불어 기술개발의 비용이 큰 폭으로 증가하고 있으며, 경쟁의 격화로 기술 및 제품의 진부화도 급속도로 이루어지고 있다. 세계화 상품고도화 서비스산업화 정보화 등으로 특징지워지는 새로운 경쟁환경 아래에서 장기적으로 기업의 경쟁력을 향상시키기 위해서는 시장중심적인 관점에서 형성된 기업간 전략적 연계를 바탕으로, 정보의 집적을 통해 다양한 생산성 향상 혹은 관계효율성 향상의 경제를 추구하는 것이 필연적 전제 조건이 되었다. 기업간 경쟁보다는 최종제품의 생산과 판매를 위해 형성된 기업네트워크간의 경쟁이 중시되는 시대인 것이다. 동서간(東西間) 중소기업(中小企業)의 협력(協力)을 새삼스럽게 논의하는 것은 다분히 정치적이라는 느낌을 준다. 경제적인 관점에서 실익이 있음에도 불구하고 동서간 중소기업의 협력이 이루어지지 못하고 있다면, 그 이유는 기업정보의 수집과 유통상의 문제이거나 문화나 기업관행에 대한 잘못된 선입관에서 비롯된 관계 관리비용 계산상의 문제일 것이다. 현실적으로 이 가능성은 매우 낮다. 산업의 발전 정도나 연관성에 있어서 동서축보다는 남북축을 따라 기업간 협력이 이루어질 수 밖에 없는 우리나라의 현재 상황이 동서간보다는 남북간 경제교류를 유도하고 있는 것이다. 동서간 중서기업 협력체제의 구축에 대한 논의가 본질적으로 정치적 관심에서 비롯되었다는 전제 하에, 구축의 방안을 논의하고자 한다. 경제적으로도 타당하면서 정치적으로 관심을 유발할 수 있는 협력체제 구축방안으로, 기업간 네트워크의 조직 주체로서 최근에 논의되고 있는 새로운 형태의 마케팅회사를 동서간에 공동으로 설립할 것을 제안한다. 영구 지속적 공동사업관계보다는 프로젝트별 공동사업을 전제로 기업들 사이의 효과적인 네트워크를 형성함으로써 일종의 가상적 기업을 결성할 필요가 있다. 이러한 기업간 네트워크 형성의 실행주체가 될 수 있는 새로운 마케팅 전문기업의 형태로는 공동회사(空洞會社)(hollow company), 종합상사(綜合商社)(General Trading Company), 거래형 마케팅회사(Marketing Exchange Company), 변환형 마케팅회사(Marketing Coalition Company) 등을 들 수 있다. 양 지역에서는 소비자환경과 기술환경의 특성 및 양 지역의 경제에 대한 파급효과를 고려하여 가장 적합한 마케팅회사의 유형은 선택하여 육성하고, 이를 중심으로 강력한 양 지역 및 다른 지역에 입지한 기업간의 네트워크를 구축하여야 한다. 마케팅회사를 설립하고 완전한 마케팅 서비스를 제공할 수 있도록 육성하기 위해서는 많은 투자가 필요하다. 마케팅회사의 핵심기능 분야인 금융부문, 정보부문, 영업조직 등은 모두 막대한 투자를 필요로하는 기능영역이다. 정보부문은 기술의 발전과 범세계적인 정보관련기관과의 제휴를 통해 독자적인 구축이 어느 정도 가능하나, 영업조직의 구축을 위해서는 기존업체와의 연대가 필수적인 것으로 판단된다. 지속적으로 효과적인 기업간 네트워크를 형성하고 유지하기 위해서는 또한 기업간 관계를 관리하는 방식과 제도 및 수단에 대한 연구가 필요하다. 양 지역 산 학 관의 공동노력을 통해서 새로운 경제 환경에 가장 적합한 기업 형태로 제시된 바 있는 마케팅 전문회사 중심의 기업간 네트워크를 성공적으로 구축한다면, 양 지역 및 국가 경제의 지속적인 동력원이 될 수 있을 것이다

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.667-678
• /
• 2002

In this paper, a new radiating structure with a multi-layered two-dimensional metallic disk array was proposed for shaping the flat-topped element pattern. It is an infinite periodic planar array structure with metallic disks finitely stacked above the radiating circular waveguide apertures. The theoretical analysis was in detail performed using rigid full-wave analysis, and was based on modal representations for the fields in the partial regions of the array structure and for the currents on the metallic disks. The final system of linear algebraic equations was derived using the orthogonal property of vector wave functions, mode-matching method, boundary conditions and Galerkin's method, and also their unknown modal coefficients needed for calculation of the array characteristics were determined by Gauss elimination method. The application of the algorithm was demonstrated in an array design for shaping the flat-topped element patterns of $\pm$20$^{\circ}$ beam width in Ka-band. The optimal design parameters normalized by a wavelength for general applications are presented, which are obtained through optimization process on the basis of simulation and design experience. A Ka-band experimental breadboard with symmetric nineteen elements was fabricated to compare simulation results with experimental results. The metallic disks array structure stacked above the radiating circular waveguide apertures was realized using ion-beam deposition method on thin polymer films. It was shown that the calculated and measured element patterns of the breadboard were in very close agreement within the beam scanning range. The result analysis for side lobe and grating lobe was done, and also a blindness phenomenon was discussed, which may cause by multi-layered metallic disk structure at the broadside. Input VSWR of the breadboard was less than 1.14, and its gains measured at 29.0 GHz. 29.5 GHz and 30 GHz were 10.2 dB, 10.0 dB and 10.7 dB, respectively. The experimental and simulation results showed that the proposed multi-layered metallic disk array structure could shape the efficient flat-topped element pattern.